京ICP备13020181号-2
© 《China Plastics》
© 《China Plastics》
China Plastics ›› 2021, Vol. 35 ›› Issue (5): 11-16.DOI: 10.19491/j.issn.1001-9278.2021.05.003
• Materials and Properties • Previous Articles Next Articles
ZHONG Luohao1, KUANG Tangqing1(), LAI Jiamei2, LIU Hesheng2, LAI Dewei1
Received:
2021-01-20
Online:
2021-05-26
Published:
2021-05-24
CLC Number:
ZHONG Luohao, KUANG Tangqing, LAI Jiamei, LIU Hesheng, LAI Dewei. Effect of Molding Process on Wall Residual Thickness Distribution and Glass⁃fiber Orientation of Short⁃glass⁃fiber⁃reinforced Polypropylene Molded Pipes[J]. China Plastics, 2021, 35(5): 11-16.
Add to citation manager EndNote|Ris|BibTeX
URL: https://www.plaschina.com.cn/EN/10.19491/j.issn.1001-9278.2021.05.003
1 | 黄 丽.聚合物复合材料[M].北京:中国轻工业出版社,2012:1⁃3. |
2 | LI L, PENG Y, WEI W. Recent Advances on Fluid Assi⁃sted Injection Molding Technique. 2014, 7(1):82⁃91. |
3 | KNIGHTS M. Water Injection Molding Makes Hollow Parts Faster, Lighter[J]. Plastics Technology, 2002,48(4):42⁃47. |
4 | IIDA I.Manufacture of Hollow Body:JP,H04208425[P].1992⁃07⁃30. |
5 | 刘文文,匡唐清,赖德炜,等.管件流体⁃弹丸辅助注射成型实验初步研究[J].塑料工业,2016,44(11):138⁃142. |
LIU W W,KUANG T Q,LAI D W,et al. Priliminary Experimental Investigation on the Fluid⁃Projectile⁃Assisted Injection Molding Pipes[J].China Plastics Industry, 2016,44(11):138⁃142. | |
6 | 汪 龙,孙 囡,杨 斌,等.玻纤增强HDPE气体辅助注射成型制品的形态[J].高分子材料科学与工程,2011,27(4):106⁃109. |
WANG L,SUN N,YANG B,et al. Morphology of GF Reinforced HDPE Composite Molded by Gas⁃Assisted Injection Molding[J].Polymer Materials Science & Engineering,2011,27(4):106⁃109. | |
7 | 周海迎,柳和生,那 兵,等.短纤维增强聚丙烯水辅注射成型短纤维取向的数值模拟[J].高分子材料科学与工程,2019,35(11):109⁃115. |
ZHOU H Y,LIU H S,NA B,et al. Numerical Simulation of Short Fiber Orientation in Short Fiber Reinforced Polypropylene Water⁃Assisted Injection Molding[J]. Polymer Materials Science & Engineering,2019,35(11):109⁃115. | |
8 | YU Z, LIU H S, KUANG T Q, et al. The Study of Short⁃shot Water⁃assisted Injection Molding of Short Glass Fiber Reinforced Polypropylene[J]. Journal of Applied Polymer Science, 2020, 137(47), DOI: 10.1002/APP.49555. |
9 | LIU S J, CHEN Y S. The Manufacturing of Thermoplastic Composite Parts by Water⁃assisted Injection⁃molding Technology[J]. Composites Part A: Applied Science and Manufacturing, 2004, 35(2):171⁃180. |
10 | 江青松,柳和生,熊爱华,等.长纤维增强聚合物注塑流动纤维取向分布数值模拟[J].高分子材料科学与工程,2015,31(3):123⁃127. |
JIANG Q S,LIU H S,XIONG A H,et al. Numerical Simulation on the Fiber Orientation Distribution During Flow in Injection Molding of Long Fiber Reinforced Polymer[J]. Polymer Materials Science & Engineering,2015,31(3):123⁃127. | |
11 | 刘保臣,申长雨,刘春太,等.注射成型短玻纤增强PP微观结构及力学性能研究[J].工程塑料应用,2009,37(6):52⁃55. |
LIU B C,SHEN C Y,LIU C T,et al. Microstructure and Mechanical Properties of Injection⁃moulded Short⁃fiber⁃reinforced Polypropylene[J]. Engineering Plastic Applications,2009, 37(6):52⁃55. | |
12 | 秦计生,彭雄奇,申 杰,等.考虑纤维方向分布的玻纤增强PP复合材料拉伸性能[J].复合材料学报,2013,30(4):53⁃58. |
QIN J S,PENG X Q,SHEN J,et al. Tensile Properties of Glass Fiber Reinforced PP Composite Considering Fiber Orientations[J]. Journal of Composite Materials,2013,30(4):53⁃58. | |
13 | 杨 帆,匡唐清,刘文文,等.水驱动弹丸辅助注塑弯管的壁厚分布[J].高分子材料科学与工程,2017,33(11):112⁃118. |
YANG F,KUANG T Q,LIU W W,et al. Distribution of Residual Wall Thickness of Water⁃Projectile⁃Assisted Injection Molding Pipes with Curved Sections[J]. Polymer Materials Science & Engineering,2017,33(11):112⁃118. | |
14 | 匡唐清,冯 强,徐 盼,等.玻纤含量对短玻纤增强聚丙烯复合材料水辅注塑制品壁厚与微观形态的影响[J].高分子材料科学与工程,2020,36(2):105⁃111,119. |
KUANG T Q,FENG Q,XU P,et al. Influence of Glass Fiber Contents on theResidual Wall Thickness and Microscopic Morphology of Water⁃Assisted Injection Molding Pipes of Short⁃Glass⁃Fiber Reinforced Polypropylene Composites[J]. Polymer Materials Science & Engineering,2020,36(2):105⁃111,119. | |
15 | KUANG T Q, FENG Q , LIU T , et al. Numerical Si⁃mulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water⁃Projectile⁃Assisted Injection Molding Process[J]. Advances in Polymer Technology, 2020(9):1⁃15. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||