1 |
穆沙 R 卡迈勒, 阿芙拉姆 J 伊萨耶夫, 刘士荣.注射成型技术基础[M].吴大鸣,译.北京:化学工业出版社, 2014:10⁃20.
|
2 |
GUEVARA⁃MORALES A, UFIGUEROA⁃LÓPEZ.Residual stresses in injection molded products[J].Journal of Materials Science, 2014, 49(13):4 399⁃4 415.
|
3 |
KANG S, KIM J S, KIM H. Birefringence distribution in magneto⁃optical disk substrate fabricated by injection compression molding[J]. Optical Engineering, 2000, 39(3): 689⁃694.
|
4 |
KIM Y, SEONG K, KANG S. Effect of insulation layer on transcribability and birefringence distribution in optical disk substrate[J]. Optical Engineering, 2002, 41(9): 2 276⁃2 281.
|
5 |
CLEEVELY S T. Living it large injection moulding aircraft canopies[J]. Materials World, 2003, 11(8):19⁃20.
|
6 |
陈宇宏.大尺寸透明件注射成型技术的研究进展[J]. 工程塑料应用, 2007, 35(9): 72⁃75.
|
|
CHEN Y H. Progress in research of injection molding technology for aircraft transparent parts of larbe size [J]. Engineering Plastics Application, 2007, 35(9): 72⁃75.
|
7 |
KNIGHTS M. Auto glazing window of opportunity for molders [J]. Plastics Technology, 2006, 52(4):52.
|
9 |
HOTAKA T, KONDO F, NIIMI R, et al. Industrialization of automotive glazing by polycarbonate and hard⁃coating[J]. Polymer Journal, 2019(51):1 249⁃1 263.
|
10 |
ISAYEV A LIN T. Frozen⁃in birefringence and anisotropic shrinkage in optical molding: I. Theory and simulation chheme[J]. Polymer, 2010, 51:316⁃327.
|
11 |
ISAYEV A, LIN T, Kwon K. Frozen⁃in birefringence and anisotropic shrinkage in optical molding: II. Comparision of simulations with experiments on light⁃guide plates[J]. 2010, 52:5 623⁃5 639.
|
12 |
KAMAL M R, LAI⁃FOOK R A, JOSE R H. Residual thermal stresses in injection moldings of thermoplastics: A theoretical and experimental study[J]. Polymer Enginee⁃ring and Science, 2002, 42:1 098⁃1 114.
|
13 |
WIMERGER⁃FRIEDL R, BRUIN J. Birefringence in polycarbonate: Molecular oriention induced by cooling stresses. II. Effects of sectioning[J]. Journal of Polymer Science: Part B: Polymer Physics, 1993, 31:1 051⁃1 060.
|
14 |
WANG T H,YOUNG W B. Study on residual stresses of thin⁃walled injection molding[J]. European Polymer Journa1,2005,41(10):2 511⁃2 517.
|
15 |
HO J Y, PARK J M, KANG T G. Three⁃dimensional numerical analysis of injection⁃compression molding process[J]. Polymer Engineering and Science, 2012, 52: 901⁃911.
|
16 |
CHEN T C, CHIU H S, CHANG Y J, et al. The injection compression effects on the optical properties beha⁃vior for injection parts[C]//Proceeding of ANTEC, 2011.
|
17 |
谢春稳. 注射压缩成型制品残余应力形成机制及光学性能研究[D]. 北京:北京化工大学,2013.
|
18 |
陈宇宏,袁 渊. 注射成型和注压成型角窗的残余应力比较[J].航空材料学报,2010,30 (3) :48⁃54.
|
|
CHEN Y H,YUAN Y.Residual stress of injection molded and injection compression molded auto glazing[J].Journal of Aeronautical Materials,2010,30 (3) :48⁃54.
|
19 |
YOUNG W B. Effect of process parameters on injection compression molding of pickup lens[J]. Applied Mathematics Modelling, 2005,29(10):955⁃971.
|
20 |
YANG S Y, CHEN Y C. Experimental study of injection⁃charged compression molding of thermoplastics [J]. Advances in polymer technology, 1998,17(4):353⁃360.
|
21 |
YANG S Y, LIEN L. Effect of cooling time and mold temperature on quality of moldings with precision contour[J]. Advances in Polymer Technology,1996,15(4):289⁃295.
|
22 |
HUANG M S, CHUNG C F. Injection molding and injection molding of thin walled light⁃guided with v⁃grooved microfeatures[J]. Journal of Applied Polymer Science, 2011, 121:1 151⁃1 159.
|
23 |
CHEN S C,CHEN Y C,PENG H S,et al. Simulation of injection⁃compression molding process, Part 3: Effect of process conditions on part birefringence[J]. Advances in Polymer Technology,2010,21(3):177⁃187.
|