1 |
Liu Q, Luo W, Zhou S, et al. Tribological behavior and morphology of PTFE particulate⁃reinforced POM matrix composites[J]. J Polym Eng, 2017, 37(3): 227⁃237.
|
2 |
Dong P, Long C, Peng Y, et al. Effect of coatings on thermal conductivity and tribological properties of aluminum foam/polyoxymethylene interpenetrating composites[J]. J Mater Sci, 2019, 54(20): 13 135⁃13 146.
|
3 |
Chen J, Cao Y, Li H. Investigation of the friction and wear behaviors of polyoxymethylene/linear low⁃density polyethylene/ethylene⁃acrylic⁃acid blends[J]. Wear, 2006, 260(11/12): 1 342⁃1 348.
|
4 |
Mai T T, Chinh N T, Baskaran R, et al. Tensile, thermal, dielectric and morphological properties of polyoxymethylene/silica nanocomposites[J]. J Nanosci Nanotechnol, 2018, 18(7): 4 963⁃4 970.
|
5 |
He J, Zhang L, Li C, et al. The effects of copper and polytetrafluoroethylene (PTFE) on thermal conductivity and tribological behavior of polyoxymethylene (POM) composites[J]. J Macromol Sci Part B⁃Phys, 2011, 50(10): 2 023⁃2 033.
|
6 |
Pei⁃ran D, Chun⁃guang L, Si⁃jia L, et al. Thermal conductivity and tribological properties of pom composites filled with sulfonated graphene and nano alumina[J]. Surf technol, 2018, 47(10): 116⁃122.
|
7 |
Luyt A S, Molefi J A, Krump H. Thermal, mechanical and electrical properties of copper powder filled low⁃density and linear low⁃density polyethylene composites[J]. Polym Degrad Stabil, 2006, 91(7): 1 629⁃1 636.
|
8 |
Ji J, Chiang S⁃W, Liu M, et al. Enhanced thermal conductivity of alumina and carbon fibre filled composites by 3⁃D printing[J]. Thermochim Acta, 2020, 690: 178649.
|
9 |
Cao J P, Zhao X, Zhao J, et al. Improved thermal conductivity and flame retardancy in polystyrene/poly(vinylidene fluoride) blends by controlling selective localization and surface modification of SiC nanoparticles[J]. ACS Appl Mater Inter, 2013, 5(15): 6 915⁃6 924.
|
10 |
Wang S, Yao Y, Tang C, et al. Mechanical characteristics, constitutive models and fracture behaviors of short basalt fiber reinforced thermoplastic composites under varying strain rates[J]. Compos Pt B⁃Eng, 2021, 218: 108933.
|
11 |
Suresha B, Sachin D, Shiddalingesha C B. Morphology and physico⁃mechanical properties of basalt fiber reinforced composites[J]. Mater Today: Proc, 2021, 46(18): 9 067⁃9 072.
|
12 |
Bazan P, Nykiel M, Kuciel S. Tribo‐mechanical properties of composites based on polyoxymethylene reinforced with basalt fiber and silicon carbide whiskers[J]. Polym Eng Sci, 2020, 61(2): 600⁃611.
|
13 |
España J M, Samper M D, Fages E, et al. Investigation of the effect of different silane coupling agents on mechanical performance of basalt fiber composite laminates with biobased epoxy matrices[J]. Polym Compos, 2013, 34(3): 376⁃381.
|
14 |
Wang B, Yu S, Mao J, et al. Effect of basalt fiber on tribological and mechanical properties of polyether⁃ether⁃ketone (PEEK) composites[J]. Compos Struct, 2021, 266: 113847.
|
15 |
Weihong W, Guojun L. The silane coupling agent treatment of basalt fibers reinforced wood⁃plastic composite[J]. Acta Mater Compos Sin, 2013, 30(S1): 315⁃320.
|
16 |
Li L, Zhaohui L, Yu X, et al. Mechanism and Road Performance of basalt fiber modified by silane coupling agent[J]. Journal of building materials, 2017, 20(4): 623⁃629.
|
17 |
Jia H, Liu C, Qiao Y, et al. Enhanced interfacial and mechanical properties of basalt fiber reinforced poly(aryl ether nitrile ketone) composites by amino⁃silane coupling agents[J]. Polymer, 2021,230:124028
|
18 |
Pan M, Chen Z, Li C. Experiment and simulation analysis of oriented cut copper fiber heat sink for LED water cooling[J]. Case Studies in Thermal Engineering, 2021,24:100878
|
19 |
Sun L, Yang Z, Li X. Mechanical and tribological properties of polyoxymethylene modified with nanoparticles and solid lubricants[J]. Polym Eng Sci, 2008, 48(9): 1 824⁃1 832.
|
20 |
Samyn P, De Baets P, Schoukens G, et al. Wear transitions and stability of polyoxymethylene homopolymer in highly loaded applications compared to small⁃scale testing[J]. Tribol Int, 2007, 40(5): 819⁃833.
|
21 |
Mirzamohammadi S, Eslami⁃Farsani R, Ebrahimnezhad⁃Khaljiri H. The characterization of the flexural and shear performances of laminated aluminum/ jute⁃basalt fibers epoxy composites containing carbon nanotubes: as multi⁃scale hybrid structures[J]. Thin⁃Walled Structures, 2022,179:109690.
|
22 |
Chun⁃guang L, Cheng⁃he L, lei C, et al. Mechanical and tribological performance of the short basalt fiber⁃reinforced polyoxymethylene composites[J]. Journal of Changsha University of Science and Technology (Natural Science), 2016, 13(3): 87⁃92.
|
23 |
Fara S, Pavan A. Fibre orientation effects on the fracture of short fibre polymer composites: on the existence of a critical fibre orientation on varying internal material variables[J]. J Mater Sci, 2004, 39(11): 3 619⁃3 628.
|
24 |
Hashemi S, Gilbride M T, Hodgkinson J. Mechanical property relationships in glass⁃filled polyoxymethylene[J]. J Mater Sci, 1996, 31(19): 5 017⁃5 025.
|