中国塑料

中国塑料 ›› 2012, Vol. 26 ›› Issue (03): 51-56 .DOI: 10.19491/j.issn.1001-9278.2012.03.009

• 材料与性能 • 上一篇    下一篇

硅橡胶／氯化聚乙烯塑料泡沫合金材料的阻尼性能研究

丁国芳 曹君 罗世凯 石耀刚   

  1. 中国工程物理研究院化工材料研究所
  • 收稿日期:2011-10-26 修回日期:1900-01-01 出版日期:2012-03-26 发布日期:2012-03-26

Study on Damping Properties of Silicone Rubber/CPE Blend Foams

DING Guofang CAO Jun LUO Shikai SHI Yaogan   

  • Received:2011-10-26 Revised:1900-01-01 Online:2012-03-26 Published:2012-03-26
  • Contact: DING Guofang

摘要： 采用机械共混法制备了硅橡胶/氯化聚乙烯泡沫合金材料，研究了硅橡胶/氯化聚乙烯共混胶相容性及热处理时间对泡沫合金材料密度、泡孔结构及阻尼性能的影响。结果表明，硅橡胶/氯化聚乙烯共混胶具有较好的相容性；与实心共混胶相比，泡沫合金材料的阻尼性能显著提高，损耗因子从0.43提高到0.68，损耗因子大于0.3的有效阻尼温域从16 ℃拓宽到45 ℃，玻璃化转变温度向高温偏移了13 ℃左右；当受到热处理之后，泡沫合金材料的阻尼性能降低。

关键词: 硅橡胶, 氯化聚乙烯, 泡沫材料, 阻尼性能

Abstract: The foams of silicone rubber/CPE blends were prepared via mechanical blending methods. The compatibility of the components, influence of heat treatment time on density, foam structure and damping properties were investigated. The blends of silicone rubber/CPE showed a good compatibility. Compared with neat silicone rubber, the effective damping temperature range (tanδ＞0.3) was broadened from 16℃ to 45℃, the maximum loss factor was increased from 0.43 to 0.68, and the glass transition temperature increased by 13℃. However, the damping properties of the foams were damaged by heat treatment.

Key words: silicone rubber, chlorinated polyethylene, foam, damping property

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2024 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发