1 |
TSAFACK T, BARTOLUCCI S F, MAURER J A. An Atomistic View of Heat Propagation from Graphene to Polyetheretherketone (PEEK)[J]. Computational Materials Science, 2020,177(109590):266⁃273.
|
2 |
WANG X, HUANG Z, LAI M, et al. Highly Enhancing the Interfacial Strength of CF/PEEK Composites by Introducing PAIK onto Diazonium Functionalized Carbon Fibers[J]. Applied Surface Science, 2020,510(145400):68⁃77.
|
3 |
冯 刚, 黄军生, 马 骅. 国外聚醚醚酮树脂专用料及应用开发概述[J]. 中国塑料, 2019,33(05):115⁃120.
|
|
FENG G, HUANG J S, MA Y. Review on Poly(ether⁃ether⁃ketone) Appropriative Resin and Its Application Development[J]. China Plastics, 2019,33(05):115⁃120.
|
4 |
LAMBIASE F, GENNA S. Experimental Analysis of Laser Assisted Joining of Al⁃Mg Aluminium Alloy with Polyetheretherketone (PEEK)[J]. International Journal of Adhesion and Adhesives, 2018,84:265⁃274.
|
5 |
SU J, TAN C, WU Z, et al. Influence of Defocus Distance on Laser Joining of CFRP to Titanium Alloy[J]. Optics and Laser Technology, 2020,124(106006).
|
6 |
GERRINGER J C, MORAN A G, HABIB T, et al. Radio Frequency Heating of Laser⁃Induced Graphene on Polymer Surfaces for Rapid Welding[J]. ACS Applied Nano Materials, 2019,2(11):7032⁃7042.
|
7 |
STOKES⁃GRIFFIN C M, KOLLMANNSBERGER A, COMPSTON P, et al. The Effect of Processing Temperature on Wedge Peel Strength of CF/PA6 Laminates Manufactured in A Laser Tape Placement Process[J]. Composites Part A⁃Applied Science and Manufacturing, 2019,121:84⁃91.
|
8 |
STOKES⁃GRIFFIN C M, COMPSTON P. The Effect of Processing Temperature and Placement Rate on the Short Beam Strength of Carbon Fibre⁃PEEK Manufactured Using a Laser Tape Placement Process[J]. Composites Part A⁃Applied Science and Manufacturing, 2015,78:274⁃283.
|
9 |
田仁杰, 朱光明. 聚醚醚酮的激光加工研究进展[J]. 中国塑料, 2020,34(02):96⁃102.
|
|
TIAN R J, ZHU G M. Research Progress in Laser Proces⁃sing of PEEK[J]. China Plastics, 2020,34(02):96⁃102.
|
10 |
XIN B, ZHOU X, CHENG G, et al. Microstructure and Mechanical Properties of Thin⁃Wall Structure by Hybrid Laser Metal Deposition and Laser Remelting Process[J]. Optics and Laser Technology, 2020,127(106087):147⁃154.
|
11 |
ZHANG Y, PERRIN V, SEVEYRAT L, et al. On A Better Understanding of the Electromechanical Coupling in Electroactive Polyurethane[J]. Smart Materials and Structures, 2020,29(0550075):178⁃186.
|
12 |
王 维, 刘 奇, 杨 光, 等. 电磁搅拌作用下激光熔池电磁场、温度场和流场的数值模拟[J]. 中国激光, 2015,42(02):48⁃55.
|
|
WANG W, LIU Q, YANG G, et al. Numerical Simulation of Electromagnetic Flow, Temperature Field and Flow Field in Laser Molten Pool with Electromagnetic Stirring[J]. Chinese Journal of Lasers, 2015,42(02):48⁃55.
|
13 |
李 强, 陈奇海, 霍绍新, 等. PEEK导热性能研究进展[J]. 工程塑料应用, 2019,47(05):144⁃147.
|
|
LI Q, CHEN H Q, HUO S Q, et al. Research Development on Thermal Conductivity of PEEK[J]. Engineering Plastics Application, 2019,47(05):144⁃147.
|
14 |
龚 飞. 热塑性塑料PP激光透射焊接技术研究[D]. 武汉:华中科技大学, 2011.
|
15 |
BENEDETTI L, BRULE B, DECREAMER N, et al. Shrinkage Behavior of Semi⁃Crystalline Polymers in Laser Sintering: PEKK and PA12[J]. Materials & Design, 2019,181(UNSP 107906):47⁃56.
|
16 |
魏胜敏, 李 英, 常 明, 等. 聚醚醚酮的红外光谱研究[J]. 合成树脂及塑料, 2019,36(02):27⁃31.
|
|
WEI S M, LI Y, CHANG M, et al. Research on Infrared Spectroscopy of PEEK[J]. China Synthetic Resin and Plastics, 2019,36(02):27⁃31.
|
17 |
LI H, WU L, ZHANG H, et al. Self⁃Assembly of Carbon Black/AAO Templates on Nanoporous Si for Broadband Infrared Absorption[J]. ACS Applied Materials & Interfaces, 2020,12(3):4 081⁃4 087.
|
18 |
CLANCY G, PEETERS D, OLIVERI V, et al. A Study of the Influence of Processing Parameters on Stee⁃ring of Carbon Fibre/PEEK Tapes Using Laser⁃Assisted Tape Placement[J]. Composites Part B⁃Engineering, 2019,163:243⁃251.
|
19 |
VILLAR M, GARNIER C, CHABERT F, et al. In⁃Situ Infrared Thermography Measurements to Master Transmission Laser Welding Process Parameters of PEKK[J]. Optics and Lasers in Engineering, 2018,106:94⁃104.
|
20 |
沈璇璇. 热塑性塑料激光透射焊接的实验研究和温度场模拟[D]. 苏州:苏州大学, 2011.
|
21 |
SONG J, MA L, HE Y, et al. Discussion about Thermal Conductivity of Carbon Black Filled Rubber[J]. Special Topics & Reviews in Porous Media⁃An International Journal, 2015,6(2):159⁃172.
|