1 |
杨 安,董扬德,胡宏伟,等.法兰盖滑块脱模机构及注塑模具设计[J].工程塑料应用,2017,45(10):82-86.
|
|
YANG A,DONG Y D,HU H W,et al. Design of Slider Demoulding Mechanism and Injection Mold for Flange Cover[J]. Engineering Plastics Applications, 2017, 45 (10): 82-86.
|
2 |
徐超辉,刘华刚,王井玲.特种量杯多向斜顶成型注塑模具设计[J].工程塑料应用,2017,45(9):84-87.
|
|
XU C H, LIU H G, WANG J L. Injection Mold Design for Special Measuring Cup with Multidirectional Angle Lifter[J]. Engineering Plastics Application, 2017,45 (9): 84-87.
|
3 |
徐文庆,肖国华,汪哲能,等.带有内外壁特殊脱模机构的摄像机支座多板式模具设计[J].工程塑料应用,2019,47(2):70-75.
|
|
XU W Q, XIAO G H, WANG Z N, et al. Multi-plate Mould Design of Camera Pedestal with Special Demoulding Mechanism in Inner and Outer Walls [J]. Engineering Plastics Application, 2019,47 (2): 70-75.
|
4 |
王怀奥.熟食机主体壳注塑模具结构设计[J].塑料工业,2017,45(11):79-84.
|
|
WANG H A. Design of Injection Mould for Main Body of Cooked Food Machine[J].China Plastics Industry,2017,45(11):79-84.
|
5 |
王 焕,黄诗君,黄少初,等. 保温水壶外壳多向抽芯机构注塑模设计[J]. 工程塑料应用,2014, 42:65-68.
|
|
WANG H , HUANG S J, HUANG S C, JI Z H.Design of Injection Mould with Multidirectional Core Pulling Mechanism for Thermal Insulation Kettle Shell[J]. Engineering Plastics Applications, 2014,42:65-68.
|
6 |
王 强,陈堂敏. 塑料模具定模斜向型芯抽芯机构设计[J]. 模具技术,2013,18303:31-33.
|
|
WANG Q, CHEN T M.Oblique Core-Pulling Mechanism Design for the Fixed Half of Plastic Mould[J].Die and Mold Technology, 2013, 18303:31-33.
|
7 |
吴 晋,李国富,邱梦宁,等.轿车左前灯灯座本体注塑模具结构设计[J].工程塑料应用,2017,45(10):70-75.
|
|
WU J, LI G F, QIU M N, et al. Structure Design of Injection Mold for Left Headlight Holder of Cars[J]. Engineering Plastics Application,2017,45(10):70-75.
|
8 |
于盛睿, 曹利钢, 冯 浩,等.家用吸尘器盖板的侧轨道抽芯注塑模设计[J].工程塑料应用,2010,38(4): 68-70.
|
|
YU S R, CAO L G, FENG H, et al. Design of Injection Mould Core Pulling Side Rail Cover Household Vacuum Cleaner[J]. Engineering Plastics Application, 2010,38(4): 68-70.
|
9 |
杨志立,黄诚驹.斜滑块内侧抽芯注射模设计[J].模具工业, 2013,39 (2):52-54.
|
|
YANG Z L, HUANG C J. Slanted Slider Inside Core-Pulling Injection Mould for Lamp Back Cover [J]. Die & Mould Industry, 2013,39 (2):52-54.
|
10 |
徐新华,郑子军.油缸浮动顶出脱模机构结构优化与注塑模具设计[J].工程塑料应用,2017,45(5):85-90.
|
|
XU X H, ZHENG Z J. Optimization of Floating Oil Cylinder Ejector Demould Mechanism Structure and Design of Injection Mould [J]. Engineering Plastics Application,2017,45(5):85-90.
|
11 |
张建卿.L10面条机主体盖前模多重脱模机构及其注塑模具设计[J].塑料,2016,45(5):83-86.
|
|
ZHANG J Q. Mould Design and CAE Optimization for Automobile Heater Under-shell [J]. Engineering Plastics Application,2016,44(5):65-69.
|
12 |
赵长荣.手机充电器底盖注塑模设计[J].工程塑料应用,2014,42(3):65-68.
|
|
ZHAO C R. Injection Mold Design of Mobile Phone Charger Bottom Cover [J].Engineering Plastics Application,2014,42(3):65-68.
|
13 |
胡智清,周 全,熊建武.仿真步枪枪托机械式自动脱模机构及注塑模具设计[J].塑料工业,2018,46(1):54-57.
|
|
HU Z Q ZHOU Q,XIONG J W. Rifle Butt Automatic Demoulding Mechanism and Injection Mold Design [J].China Plastic industry, 2018, 46 (1): 54-57.
|
14 |
欧阳波仪.汽车仪表罩倾斜式多种脱模机构及其注塑模具设计[J].塑料工业,2016,44(9):70-75.
|
|
OUYANG B Y.Inclined Multiple Ejection Mechanisms for Automobile Instrument Cover and Injection Mold Design[J].China Plastics Industry, 2016,44(9): 70-75.
|
15 |
杨华林.锥形盖差速滑块脱内螺纹机构及注塑模具设计[J].工程塑料应用,2019,47(11):64-70.
|
|
YANG H L. Design of Internal Thread Demoulding Mechanism and Injection Mold for Taper Cap Differential Slider[J]. Engineering Plastics Application, 2019,47 (11): 64-70.
|