中国塑料

中国塑料 ›› 2011, Vol. 25 ›› Issue (05): 39-45 .DOI: 10.19491/j.issn.1001-9278.2011.05.009

• 材料与性能 • 上一篇    下一篇

聚乳酸/乙烯-醋酸乙烯酯共聚物/碳酸钙复合材料的性能研究

杨刚 李怀栋 窦强   

  1. 南京工业大学材料学院 南京工业大学 南京工业大学
  • 收稿日期:2011-01-05 修回日期:2011-03-09 出版日期:2011-05-26 发布日期:2011-05-26

Study on the Properties of Poly(lactic acid)/Ethylene Vinyl Acetate / Calcium Carbonate Composites

Yang Gang Yang DOU Qiang   

  • Received:2011-01-05 Revised:2011-03-09 Online:2011-05-26 Published:2011-05-26
  • Contact: DOU Qiang

摘要： 采用熔融共混法制备了聚乳酸/乙烯-醋酸乙烯酯共聚物/碳酸钙（PLA/EVA/CaCO3）复合材料，利用差示扫描量热仪、X射线衍射仪、偏光显微镜、扫描电子显微镜、力学性能测试和热变形温度测试等手段，研究了EVA和CaCO3对复合材料的结晶性能、断面形貌、力学性能和耐热性能的影响。结果表明，EVA 具有增韧作用，但降低了复合材料的强度和耐热性；而CaCO3可以提高复合材料的强度、韧性、结晶性能和耐热性能；CaCO3与EVA的加入对PLA有协同增韧作用，且不改变PLA的晶型；当PLA/EVA=90/10，加入10 %（质量分数，下同）的CaCO3时，复合材料有最佳的综合性能。

关键词: 复合材料, 耐热性能, 聚乳酸, 碳酸钙, 乙烯-醋酸乙烯酯共聚物, 结晶性能, 力学性能

Abstract: Poly (lactic acid) (PLA)/ethylene vinyl acetate(EVA)/CaCO3 composites were prepared via melt blending using a twin screw extruder. The effect of CaCO3 and EVA on crystallization, fracture surface, mechanical properties, and heat resistance of the composite were investigated by means of DSC, XRD, PLM, SEM, mechanical property and HDT tests. The toughness of the composite was increased, but the stiffness and heat resistance were decreased by the addition of EVA. While the stiffness, toughness, crystallization rate, and heat resistance were increased by the addition of CaCO3. A synergistic effect was observed in the combination of CaCO3 and EVA. No changes of crystal forms was found in the composites. The optimum comprehensive properties were achieved in case of the composite containing 10 wt % CaCO3 while PLA/EVA=90/10.

Key words: composite, heat resistance, poly (lactic acid), calcium carbonate, ethylene vinyl acetate, crystallization, mechanical property

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2023 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发