改性聚碳酸酯耐高温性能研究进展

›› 2024, Vol. 38 ›› Issue (6): 125-131.

改性聚碳酸酯耐高温性能研究进展

蒋琴瑶,贾雨耀,杨绍哲,吴蓉,白威,孙腾

中国科学院成都有机化学研究所

收稿日期:2023-10-27 修回日期:2023-11-08 出版日期:2024-06-26 发布日期:2024-06-26
基金资助:
中国科学院重点部署项目

Research progress in high-temperature resistance of modified polycarbonate

Received:2023-10-27 Revised:2023-11-08 Online:2024-06-26 Published:2024-06-26

摘要/Abstract

摘要： 从化学及物理改性两个方面综述了近年来国内外对耐高温聚碳酸酯（PC）改性的研究进展。

关键词: 耐高温聚碳酸酯, 化学改性, 物理改性

Abstract: This paper reviewed the research progress in high-temperature-resistant modification of polycarbonate at home and abroad in recent years from two aspects： chemical and physical modifications.

Key words: high temperature resistant polycarbonate, chemical modification, physical modification

蒋琴瑶贾雨耀杨绍哲吴蓉白威孙腾. 改性聚碳酸酯耐高温性能研究进展[J]. , 2024, 38(6): 125-131.

参考文献

[1] BRUNELLE D J. Advances in polycarbonates: An overview [M]. Advances in
Polycarbonates. Washington; Amer Chemical Soc. 2005: 1-5.
[2] 陈凯, 张廷健, 杨先贵, et al. 酯交换缩聚法制备聚碳酸酯工艺的研究进展 [J]. 石油化工,
2012, 41(04): 484-90.
[3] CANTRELL J T, ROHDE S, DAMIANI D, et al. Experimental characterization of the
mechanical properties of 3D-printed ABS and polycarbonate parts [J]. Rapid Prototyping
Journal, 2017, 23(4): 811-24.
[4] 苏坤梅, 李振环, 程博闻, et al. 双酚 A 型聚碳酸酯的合成与性能研究进展 [J]. 科技导报,
2009, 27(08): 80-6.
[5] LI C, SABLONG R J, VAN BENTHEM R A T M, et al. Unique Base-Initiated
Depolymerization of Limonene-Derived Polycarbonates [J]. ACS Macro Letters, 2017,
6(7): 684-8.
[6] LIU Y, REN W-M, LIU J, et al. Asymmetric Copolymerization of CO2 with meso-Epoxides
Mediated by Dinuclear Cobalt(III) Complexes: Unprecedented Enantioselectivity and
Activity [J]. Angewandte Chemie International Edition, 2013, 52(44): 11594-8.
[7] AJELLAL N, CARPENTIER J-F, GUILLAUME C, et al. Metal-catalyzed immortal ringopening
polymerization of lactones, lactides and cyclic carbonates [J]. Dalton
Transactions, 2010, 39(36): 8363-76.
[8] OLSEN P, UNDIN J, ODELIUS K, et al. Switching from Controlled Ring-Opening
Polymerization (cROP) to Controlled Ring-Closing Depolymerization (cRCDP) by
Adjusting the Reaction Parameters That Determine the Ceiling Temperature [J].
Biomacromolecules, 2016, 17(12): 3995-4002.
[9] KAUSAR A. A review of filled and pristine polycarbonate blends and their applications [J].
Journal of Plastic Film & Sheeting, 2017, 34(1): 60-97.
[10] NAGANE S S, MAHER D M, VERMA S, et al. Pendant propargyloxy-functionalized
aromatic (co)polycarbonates: synthesis, thermal crosslinking and chemical modification
[J]. Journal of Macromolecular Science, Part A, 2022, 59(11): 752-63.
[11] PARK S-A, CHOI J, JU S, et al. Copolycarbonates of bio-based rigid isosorbide and
flexible 1,4-cyclohexanedimethanol: Merits over bisphenol-A based polycarbonates [J].
Polymer, 2017, 116: 153-9. [12] BAICK I H, YANG W J, AHN Y G, et al. Structure and Properties of Ultra-High Molecular
Weight Bisphenol A Polycarbonate Synthesized by Solid-State Polymerization in
Amorphous Microlayers [J]. Journal of Applied Polymer Science, 2015, 132(10): 10.
[13] ZHANG X, LIU Y, LI X, et al. Improving the Thermal Properties of Polycarbonate via the
Copolymerization of a Small Amount of Bisphenol Fluorene with Bisphenol A [J].
International Journal of Polymer Science, 2022, 2022: 9255159.
[14] LEE C-H, TAKAGI H, OKAMOTO H, et al. Preparation and mechanical properties of a
copolycarbonate composed of bio-based isosorbide and bisphenol A [J]. Polymer
Journal, 2015, 47(9): 639-43.
[15] VAN BUU O N, AUPOIX A, HONG N D T, et al. Chiral ionic liquids derived from
isosorbide: synthesis, properties and applications in asymmetric synthesis [J]. NEW
JOURNAL OF CHEMISTRY, 2009, 33(10): 2060-72.
[16] 张廷健, 杨先贵, 王公应, et al. 双酚 S 和双酚 A 与碳酸二苯酯共聚合成阻燃性聚碳酸酯
[J]. 高分子材料科学与工程, 2014, 30(04): 22-5.
[17] 鄂永胜, 吕萍, 刘彬, et al. 双酚 AF 型聚碳酸酯的制备与性能 [J]. 工程塑料应用, 2022,
50(04): 41-5+57.
[18] 徐禄波, 麻一明, 吴剑波, et al. 一种高耐热抗冲击聚碳酸酯组合物及其制备方法,
CN111057358B [P/OL].
[19] WANG X C, SUN Y P, HU J L, et al. The Study of Crystallization Behavior, Microcellular
Structure and Thermal Properties of Glass-Fiber/Polycarbonate Composites [J]. Polymers,
2023, 15(6): 16.
[20] FATHALIAN M, AHANGARI M G, FEREIDOON A. Effect of Nanosilica on the Mechanical
and Thermal Properties of Carbon Fiber/Polycarbonate Laminates [J]. Fibers and
Polymers, 2019, 20(8): 1684-9.
[21] PANG X Y, CHEN M D, FU J W, et al. Eugenol Polysiloxane-Polycarbonate/Graphene
Nanocomposite: Enhanced in Thermostability and Barrier Property [J]. Nanomaterials,
2019, 9(12): 9.
[22] 刘凯, 李复生. 芴环结构对聚碳酸酯热性能的改进 [J]. 塑料, 2011, 40(04): 78-80+105.
[23] 章家立, 瞿秉华. 芳香族聚碳酸酯的化学改性研究进展 [J]. 中国塑料, 2016, 30(01): 1-6.
[24] CHOI G-H, HWANG D Y, SUH D H. High Thermal Stability of Bio-Based Polycarbonates
Containing Cyclic Ketal Moieties [J]. Macromolecules, 2015, 48(19): 6839-45.
[25] YAN-NA Z, LEI L, JI D-X, et al. Preparation and Characterization of Waterborne
Polyurethane Modified by 4-Maleimidophenol to Enhance the Mechanical and Thermal
Properties [J]. Polymer Science, Series B, 2019, 61(5): 595-604.
[26] LU D, WEN L, XUE L. Synthesis and characterization of novel 4-phenyl-pyridine unit
based alkaline anion exchange membranes [J]. RSC Advances, 2016, 6(75): 71431-40.
[27] 鄂永胜, 吕萍. 双酚 S/双酚 A 共聚碳酸酯的制备及性能研究 [J]. 塑料科技, 2022, 50(04):
55-9.
[28] 王芳, 李言, 郭新涛, et al. 含双酚芴三元共聚聚砜的合成与性能 [J]. 中国塑料, 2022,
36(11): 24-9.
[29] 刘静月, 胡林清, 何小航, et al. 双酚 AF 改性水性聚氨酯的合成与性能研究 [J]. 塑料工业,
2020, 48(03): 39-43.
[30] 张可超, 钟家春, 蒲泽军, et al. 生物基含氟聚碳酸酯及其制备方法, CN115536827A
[P/OL]. [31] XU J, LI H, ZENG K, et al. Curing kinetics and thermal stability of novel siloxanecontaining
benzoxazines [J]. Thermochimica Acta, 2019, 671: 119-26.
[32] ZHOU W, OSBY J. Siloxane modification of polycarbonate for superior flow and impact
toughness [J]. Polymer, 2010, 51(9): 1990-9.
[33] SEESUKPHRONRARAK S, KAWASAKI S, KUWATA S, et al. Synthesis and characterization
of 9,9-bis(4-hydroxyphenyl and 4-aminophenyl)dibenzofluorenes: Novel fluorenebased
monomers [J]. Journal of Polymer Science Part A: Polymer Chemistry, 2019, 57(24):
2602-5.
[34] LI C, LONG X, SUN T, et al. Study on the Preparation and Optical Properties of Copolycarbonates
Based on Binaphthalene and Cardo Structures [J]. Chemistryselect, 2023,
8(7): 6.
[35] SURESH S, GULOTTY R J, BALES S E, et al. A novel polycarbonate for high temperature
electro-optics via azo bisphenol amines accessed by Ullmann coupling [J]. Polymer,
2003, 44(18): 5111-7.
[36] E Y, LV P, YANG F. Study on Synthesizing Polycarbonate with Triphosgene [J]. Journal of
Physics: Conference Series, 2022, 2194(1): 012033.
[37] GUAN X-H, NIE H-R, WANG H-H, et al. High-solubility aromatic polyesters with
fluorene and phthalein groups: Synthesis and property [J]. High Performance Polymers,
2020, 32(8): 933-44.
[38] 陈宇宏, 杜力鹏, 王凯, et al. 4,4-(9-芴)二苯酚型聚碳酸酯的合成及其耐高温性能研究 [J].
高分子学报, 2016, (09): 1273-80.
[39] 李涛, 沈佶, 麦富航, et al. 双酚芴、双酚 A 型聚碳酸酯共聚物的合成及其耐热性能研究
[J]. 广东化工, 2022, 49(20): 44-6+58.
[40] 刘斌, 陈磅宽. 基于联萘酚骨架的新型圆偏振发光材料的合成及性能探究 [J]. 化学学报,
2022, 80(07): 929-35.
[41] MANUSZ J, LENZ R W, MACKNIGHT W J. Mechanical and thermal properties of aromatic
copolyesters containing rigid binaphthyl units [J]. Polymer Engineering & Science, 1981,
21(16): 1079-84.
[42] TAKATA T, MATSUOKA H, ENDO T. Synthesis ang anionic ring-opening polymerization
of a novel aromatic cyclic carbonate having binaphthyl structure [J]. Chemistry Letters,
1991, (12): 2091-4.
[43] 魏志涛, 曾伟, 王磊, et al. 一种耐高温聚碳酸酯共聚物及其制备方法和应用,
CN113929894A [P/OL].
[44] KUMAR S, RAMACHANDRAN U. The synthesis and applications of asymmetric phasetransfer
catalysts derived from isomannide and isosorbide [J]. Tetrahedron, 2005, 61(16):
4141-8.
[45] LE H H, CARLSON E M, CHUA J P, et al. Bisphenol A is released from polycarbonate
drinking bottles and mimics the neurotoxic actions of estrogen in developing cerebellar
neurons [J]. Toxicology Letters, 2008, 176(2): 149-56.
[46] FOUYET S, OLIVIER E, LEPROUX P, et al. Bisphenol A, Bisphenol F, and Bisphenol S: The
Bad and the Ugly. Where Is the Good? [J]. Life-Basel, 2021, 11(4): 13.
[47] 刘传国, 李晓, 钟家春, et al. 生物基耐高温聚碳酸酯及其制备方法, CN115873227A
[P/OL].
[48] YUM S, KIM H, SEO Y. Synthesis and characterization of isosorbide based polycarbonates [J]. Polymer, 2019, 179: 6.
[49] EO Y S, RHEE H-W, SHIN S. Catalyst screening for the melt polymerization of
isosorbide-based polycarbonate [J]. Journal of Industrial and Engineering Chemistry,
2016, 37: 42-6.
[50] JEONG Y G, JO W H, LEE S C. Crystal Structure Determination of Poly(1,4-transcylcohexylenedimethylene
2,6-naphthalate) by X-ray Diffraction and Molecular
Modeling [J]. Macromolecules, 2003, 36(14): 5201-7.
[51] HUSSAIN F, PARK S, JEONG J, et al. Structure–property relationship of poly(cyclohexane
1,4‐dimethylene terephthalate) modified with high trans‐1,4‐cyclohexanedimethanol
and 2,6‐naphthalene dicarboxylicacid [J]. Journal of Applied Polymer Science, 2020,
137(32).
[52] WU X, XU D, DE BRUYN M, et al. Novel stereoisomeric lignin-derived polycarbonates:
towards the creation of bisphenol polycarbonate mimics [J]. Polym Chem, 2023, 14(8):
907-12.
[53] RUCIGAJ A, KOVACI Z, STIRN I, et al. The joint effect of amine and maleimide functional
group in aminomaleimide on the curing kinetics and mechanical properties of epoxy
resins [J]. Thermochimica Acta, 2020, 690: 10.
[54] NAGANE S S, KUHIRE S S, JADHAV U A, et al. Design and Synthesis of Aromatic
Polyesters Bearing Pendant Clickable Maleimide Groups [J]. Journal of Polymer Science
Part A: Polymer Chemistry, 2019, 57(5): 630-40.
[55] JADHAV U A, NAGANE S S, WADGAONKAR P P. Synthesis, characterization and postmodification
of aromatic (Co)polyesters possessing pendant maleimide groups [J]. High
Performance Polymers, 2022: 12.
[56] TALANIKAR A A, NAGANE S S, WADGAONKAR P P, et al. Post-polymerization
modifiable aromatic (co)poly(ether sulfone)s possessing pendant norbornenyl groups
based upon a new bisphenol [J]. EUROPEAN POLYMER JOURNAL, 2022, 176.
[57] 戴飞亮, 付子恩, 蒋金博, et al. 有机硅(碳)嵌段共聚物的合成及其应用研究进展 [J]. 材料
导报, 2022, 36(09): 199-210.
[58] ZHANG X, LIU J, QU R, et al. Synthesis and characterization of siloxane functionalized
CO2-based polycarbonate [J]. Polymer, 2023, 266: 125623.
[59] PANG X Y, GE X, JI J Y, et al. Improving Oxygen Permeability and Thermostability of
Polycarbonate via Copolymerization Modification with Bio-Phenol Polysiloxane [J].
Polymers, 2019, 11(8): 10.
[60] ZHOU Z B, WU G Z. Preparation of Bisphenol-A and Polydimethylsiloxane (PDMS) Block
Copolycarbonates by Melt Polycondensation: Effects of PDMS Chain Length on
Conversion and Miscibility [J]. Polymers, 2021, 13(16): 15.
[61] WANG Z, QIU Y, LIU A, et al. Micro-crosslinking of phosphaphenanthrene/siloxane
molecule initiate aggregation flame retardant and toughening enhancement effects on
its polycarbonate composite [J]. Chemical Engineering Journal, 2023, 466: 143169.
[62] JIANG B, LUAN J, QIN S, et al. Fabrication of very effective ferroferric oxide and
multiwalled carbon nanotubes@polyetherimide/poly(ether ether ketone)
electromagnetic interference shielding composites [J]. Polymer Composites, 2020, 41(8):
3135-43.
[63] 张伟, 史远洲, 张燕杰, et al. 一种耐高温抗紫外聚碳酸酯及其制备方法, CN115141478A [
P
/
O
L
].