Effect of Vibration Injection Molding on Crystal Morphology and Physics Properties of Polyamide6

doi:10.19491/j.issn.1001-9278.2008.09.013

China Plastics ›› 2008, Vol. 22 ›› Issue (09): 63-65 .DOI: 10.19491/j.issn.1001-9278.2008.09.013

Previous Articles Next Articles

Effect of Vibration Injection Molding on Crystal Morphology and Physics Properties of Polyamide6

LEI Yan-wei;YANG Liang-bo;WEN Yao-feng;SHEN Kai-zhi;ZHANG Jie

Department of Polymeric Materials & Engineering，State Key Laboratory of Polymer Materials Engineering, Sichuan University

Received:1900-01-01 Revised:1900-01-01 Online:2008-09-26 Published:2008-09-26

Abstract

Abstract:

The physics properties of polyamide 6 samples by regular and vibration injection moldings were compared in this paper. Effects of vibration frequency and vibration pressure on the physics properties and crystal morphology of polyamide 6 were studied. The tensile strength of samples obtained by vibration injection molding was higher than that by regular one. The crystal structure was characterized using WAXD. The γ form of polyamide 6 was decreased by vibration injection molding.

Key words: vibration injection molding, polyamide6, physics property, crystal morphology

LEI Yan-wei, YANG Liang-bo, WEN Yao-feng, SHEN Kai-zhi, ZHANG Jie. Effect of Vibration Injection Molding on Crystal Morphology and Physics Properties of Polyamide6 [J]. China Plastics, 2008, 22(09): 63-65 .

[1]	. Scale Inhibition Performance of Amino?terminated Hyperbranched Polyamides for Calcium Sulfate from Circulating Water [J]. China Plastics, 2020, 34(1): 43-50.
[2]	. Effect of Triphenylphosphite on Crystallization Behavior of Poly(lactic acid) [J]. China Plastics, 2015, 29(08): 42-47 .
[3]	. Effect of Halloysite Nano-Tubes on Properties and Phase Morphology of PA66/TLCP In Situ Composites [J]. China Plastics, 2014, 28(05): 54-58 .
[4]	Jiang Zhao-Yin . Effect of Screw Assembly on Glass Fiber Length and Mechanical Property of Glass Fiber-Reinforced Nylon-66 Composite [J]. China Plastics, 2012, 26(02): 98-103 .
[5]	Xingming LI Zhiping LV. Effect of N-glycine Amide Maleic Acid on the Nucleation of PP [J]. China Plastics, 2011, 25(09): 34-37 .
[6]	. Nonisothermal Crystallization Behaviors and Crystal Morphology of PP/Nano-TiO₂ Composites [J]. China Plastics, 2010, 24(05): 51-58 .
[7]	TAN Zhiyong WANG Dandan MU Xingwen CHEN Min ZHANG Huixuan. Study on PA6/PS Blends with Compatibilized Functionalized Graft Copolymer [J]. China Plastics, 2010, 24(04): 34-38 .
[8]	LV Zhi-ping WANG Wei-xing ZHANG You-qiang WAN Zhao-rong XUE Jian-wei. Preparation and Application of New β-Nucleating Agent of Polypropylene [J]. China Plastics, 2009, 23(07): 81-84 .
[9]	DING xuejia deqiang zhang bin tang hongbo li haijiao xue. Morphologies and dynamic rheological behavbior of Polystyrene/Polyamide 6 blend and their blends compatibilized with styrene-ethylene/butylene-styrene elastomer grafted with maleic anhydride [J]. China Plastics, 2009, 23(04): 32-35 .
[10]	WANG Rong-fei;GAO Lei;SHEN Kai-zhi. Effect of A Small Amount of High-molecular-weight Polyethylene on Crystal Morphology of High-density Polyethylene under Dynamic Packing Injection Molding [J]. China Plastics, 2008, 22(12): 16-21 .
[11]	NI Zhuo, NIU Ke. Effect of DMDBS on Crystallization Behavior of Polypropylene [J]. China Plastics, 2008, 22(07): 78-82 .
[12]	ZHOU Qi, WANG Yong, QIU Gui-xue. Effect of DCP on Properties of Dynamically Vulcanized POE/PP Thermoplastic Elastomer [J]. China Plastics, 2008, 22(04): 79-82 .

Effect of Vibration Injection Molding on Crystal Morphology and Physics Properties of Polyamide6

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 12

Recommended Articles

Metrics

Comments