Parameter Optimization of High-gloss & Non-Weld Line Injection Molding for Cases of Automotives Bluetooth Based on CAE

doi:10.19491/j.issn.1001-9278.2010.04.013

China Plastics ›› 2010, Vol. 24 ›› Issue (04): 61-64 .DOI: 10.19491/j.issn.1001-9278.2010.04.013

Previous Articles Next Articles

Parameter Optimization of High-gloss & Non-Weld Line Injection Molding for Cases of Automotives Bluetooth Based on CAE

HU Wenwen XIN Yong

Received:2009-11-25 Revised:2009-12-30 Online:2010-04-26 Published:2010-04-26

Abstract

Abstract: Using automotive bluetooth as a model system, differences between the injection moldings for high-gloss and local dense hole plastic parts were studied. The high-gloss injection molding was studied using Moldflow combined with Taguchi method, numerical simulation, and data processing. The influence of mold and melt temperatures on warpage, volumetric shrinkage, and weld line was studied. Based on the research, molding process parameters were optimized.

Key words: weld line, Taguchi method, warpage, high-gloss injection molding

CLC Number:

HU Wenwen XIN Yong. Parameter Optimization of High-gloss & Non-Weld Line Injection Molding for Cases of Automotives Bluetooth Based on CAE[J]. China Plastics, 2010, 24(04): 61-64 .

[1]	SUN Qiwei, CHEN Yuhong, DONG Shuyuan, LANG Jianlin, ZHOU Xiaowei, ZHANG Yun. Warpage Simulation of Overmolding Injection Compression Molded PMMA/PC Composite Panels [J]. China Plastics, 2021, 35(4): 53-59.
[2]	WU Junchao. Process optimizationof injection mold for large plastic parts of automobile dashboard based on Moldflow [J]. China Plastics, 2021, 35(12): 121-128.
[3]	YU Shengrui, ZOU Jiayong, LUO Jie, ZENG Yihe, LIU Guang, LING Yan, WANG Yunming, HAN Wen, ZHOU Huamin. Warpage of microcellular foaming and in⁃mold decoration combined injection molding under asymmetric temperature field [J]. China Plastics, 2021, 35(12): 63-69.
[4]	YI Xin, ZHANG Yong, WU Changbo, ZHOU Hualong, XU Hongji, DING Chao. Study on Warpage of Flame⁃retardant PA66 Composites [J]. China Plastics, 2021, 35(1): 19-24.
[5]	Jinkun WANG, Zhenghua MENG, Wei GUO, Haosheng HU, Lei ZHOU. Influence of Film Heat Lag of In⁃mold Decoration on Molding Process [J]. China Plastics, 2020, 34(4): 70-77.
[6]	XIAO Qingwu, LIU Hesheng, HUANG Yibin. Numerical Simulation on Warpage of External Gas?Assisted Injection?Molded Parts [J]. China Plastics, 2020, 34(3): 48-53.
[7]	Qian Wang. Optimization of Adjusting Machine Parameters of Injection Molding for Car Storage Box Based on Orthogonal Experiment [J]. China Plastics, 2019, 33(3): 74-80.
[8]	. Balanced Injection Optimization of Automotive Auxiliary Instrument Boxes Based on CAE [J]. China Plastics, 2018, 32(10): 105-112.
[9]	. Preparation and Applications of Polyhedral Pigments with Metallic Effect [J]. China Plastics, 2018, 32(08): 58-64.
[10]	. Optimal Design and Analysis of Pressure Holding Curve During Injection Molding Process [J]. China Plastics, 2017, 31(5): 71-77 .
[11]	. Study on Rapidly Thermal Cycle Injection Molding Using Carbide-bonded Graphene Coating [J]. China Plastics, 2016, 30(10): 55-59 .
[12]	. Analysis and Optimization of Warpage Defect in Injection-molded Parts with Complicated Shapes Based on CAE Technology [J]. China Plastics, 2016, 30(10): 77-80 .
[13]	. Numerical Simulation on Thermalfluidstructure Coupling Deformation of Chip Plastic Encapsulation Process [J]. China Plastics, 2016, 30(07): 62-68 .
[14]	. Application of CAE in Injection Mould Parting Surface Compensation [J]. China Plastics, 2016, 30(05): 82-86 .
[15]	. Research of Injection Molding Process for Carbon Fiber/Glass Fiber Reinforced Composite [J]. China Plastics, 2015, 29(10): 64-67 .

Parameter Optimization of High-gloss & Non-Weld Line Injection Molding for Cases of Automotives Bluetooth Based on CAE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments