[1] |
HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan.
Injection defect analysis and molding optimization of high⁃gloss grille for an automobile
[J]. China Plastics, 2022, 36(9): 70-73.
|
[2] |
ZHANG Bing.
Study on test of oxidation induction time for random copolymer polypropylene pipe
[J]. China Plastics, 2022, 36(8): 107-109.
|
[3] |
ZHANG Taozhong, CHEN Xiaolong, HAO Xiaoyu, YU Fujia.
Comparison of mechanical properties and interfacial interactions of polypropylene composites filled with talc, calcium carbonate, and barium sulfate
[J]. China Plastics, 2022, 36(8): 36-41.
|
[4] |
WANG Yang, CHENG Lisheng, TAN Jing, YANG Weimin, WANG Ruixue, ZHANG Zhenghe.
Moldflow analysis of influence of filler on polyether ether ketone injection molding
[J]. China Plastics, 2022, 36(5): 68-74.
|
[5] |
WEN Yuan, MAO Xianpeng, XU Kejie.
Effect of sample thickness on tensile properties of polyethylene
[J]. China Plastics, 2022, 36(4): 43-46.
|
[6] |
ZHANG Zhouya, BAI Shijian, ZHANG Yuxia, ZHOU Hongfu, GONG Fangfang, TANG Xueguli, WANG Bin.
Research Progress in Factors Affecting Thermal Conductivity of Polymeric Materials
[J]. China Plastics, 2021, 35(9): 156-165.
|
[7] |
ZHONG Luohao, KUANG Tangqing, LAI Jiamei, LIU Hesheng, LAI Dewei.
Effect of Molding Process on Wall Residual Thickness Distribution and Glass⁃fiber Orientation of Short⁃glass⁃fiber⁃reinforced Polypropylene Molded Pipes
[J]. China Plastics, 2021, 35(5): 11-16.
|
[8] |
SHENG Leihui, MA Yuji, HUANG Ming, LU Bo, LIU Chuntai, ZHANG Na.
Failure Analysis of Falling⁃off Behavior of Car Front Glass Bracket
[J]. China Plastics, 2021, 35(4): 18-22.
|
[9] |
DUAN Jingting, ZHANG Xiaolin, WANG Zhe, LI Shaoge, DI Jingjing, LYU Jinyan, ZHU Xiaofeng, WANG Yi.
Preparation and Performance of PE⁃HD/Wheat Straw Composites Filled by Mineral Fillers
[J]. China Plastics, 2021, 35(3): 1-7.
|
[10] |
YUAN Zhihuan, KUANG Tangqing, LAI Jiamei, LIU Hesheng, XU Pan.
Influence of Processing Parameters on Wall Thickness and Properties of Water⁃assisted Co⁃injection Molding Pipes of Polypropylene/Polyamide 6 Blends
[J]. China Plastics, 2021, 35(11): 77-83.
|
[11] |
LI Shao, WANG Xiaoxin, ZHOU Lehui, FU Nuofeng, ZHONG Jianquan.
Research on the Influence of Plastic Viscosity and Product Thickness on Core Penetration Effect of Sandwich Injection Molding
[J]. China Plastics, 2021, 35(10): 83-87.
|
[12] |
WANG Yanqing, KUANG Tangqing, LAI Jiamei, FENG Qiang, LIU Wenwen.
Effect of Projectile on Residual Wall Thickness of Water⁃projectile⁃assisted Injection Molded Pipes
[J]. China Plastics, 2021, 35(1): 60-66.
|
[13] |
ZHANG Jingshun, JIANG Hong, MAN Ji.
Study on Classification of Sole Materials Based on X-Ray Fluorescence Spectrometry and Biplot Analysis
[J]. China Plastics, 2020, 34(9): 80-83.
|
[14] |
Jin ZHANG, Hong JIANG, Jingshun ZHANG, Feng LIU, Bin DUAN.
Discrimination and Classification of Sneaker Sole by Combination of Differential Raman Spectroscopy and Cluster Analysis
[J]. China Plastics, 2020, 34(7): 80-85.
|
[15] |
MA Yuji, FANG Mei, LI Guixun, HUANG Ming, LIU Chuntai, ZHANG Na∗.
Effects of Thickness and Moisture Content of PVB Sandwich Films on Performance of Automotive Front Shield Glass
[J]. China Plastics, 2020, 34(12): 25-28.
|