New Research Progress in Modification of Unsaturated Polyester Resin

doi:10.19491/j.issn.1001-9278.2013.05.004

China Plastics ›› 2013, Vol. 27 ›› Issue (05): 19-23 .DOI: 10.19491/j.issn.1001-9278.2013.05.004

New Research Progress in Modification of Unsaturated Polyester Resin

Received:2013-01-23 Revised:2013-03-15 Online:2013-05-26 Published:2013-05-26

Abstract

Abstract: The advanced modification method of unsaturated polyester resin (UPR) was reviewed, including toughening, flame retarding, and lowering shrinkage. The formation of interpenetrating network and introduction of nano particle were also introduced. The existing problems and development prospects of UPR modification were discussed.

Key words: unsaturated polyester resin, toughening, inflaming retarding, low shrinkage, modification

CLC Number:

TQ 323.42

. New Research Progress in Modification of Unsaturated Polyester Resin[J]. China Plastics, 2013, 27(05): 19-23 .

[1]	ZHANG Lin, XIA Zhangchuan, HE Yadong, XIN Chunling, WANG Ruixue, REN Feng. Influence of gas flow of plasma jet carrier on modification effect for glass fiber [J]. China Plastics, 2022, 36(9): 7-15.
[2]	HUANG Jiawei, HAN Xiaolong, WU You, JIN Yujuan, WANG Zhao. Toughening modification of poly （3⁃hydroxybutyrate⁃co⁃3⁃hydroxyvalerate） by bio⁃based engineering polyester elastomer [J]. China Plastics, 2022, 36(9): 24-31.
[3]	MA Chao, MA Lanrong, WEI Liao, YIN Huibo, LIN Xiang. A review of modification processing and water⁃soluble degradation ability of polyglycolic acid material [J]. China Plastics, 2022, 36(9): 74-84.
[4]	MA Guocheng, HE Zhen, CHEN Shaojun. Research progress in degradability of cellulose acetate [J]. China Plastics, 2022, 36(9): 111-121.
[5]	YANG Chaoyong, GUO Jinqiang, WANG Fuyu, ZHNAG Yuxia. Research progress in preparation and modification methods of high-performance plastic films [J]. China Plastics, 2022, 36(9): 167-179.
[6]	YU Darong, XIN Yong. Research progress in modification of ultrahigh molecular weight polyethylene [J]. China Plastics, 2022, 36(8): 135-145.
[7]	YU Jiuyang, WANG Zhonghao, CHEN Qi, XIA Yazhong. Study on properties of advanced resin matrix composites for valve body manufacturing [J]. China Plastics, 2022, 36(8): 16-22.
[8]	CHEN Baiquan, ZHENG Youming, TIAN Jibo, XHANG Lei, WANG Jinsong, LIN Xiajie, DUAN Yapeng. Preparation and properties of polyamide flame⁃retardant composite reinforced with high content of glass fiber [J]. China Plastics, 2022, 36(8): 42-48.
[9]	FENG Kai, LI Yongqing, MA Xiuqing, HAN Ying. Research progress and application in toughening modification of polyoxymethylene [J]. China Plastics, 2022, 36(7): 157-164.
[10]	LI Jinfeng, LIANG Zhuoen, PENG Xinlong. Properties of unsaturated polyester resin composites modified with intumescent flame retardant and alu minum diethyl phosphate [J]. China Plastics, 2022, 36(6): 116-123.
[11]	CHEN Ke, LIU Mingfei, ZHAO Biao, PAN Kai. Research progress in flame retardancy and ablation resistance of silicone⁃modified polymeric materials [J]. China Plastics, 2022, 36(6): 149-154.
[12]	DENG Tianxiang, XU Lina, LI Shouhai, ZHANG Yan, YAO Na, JIA Puyou, DING Haiyang, LI Mei. Research progress in grafting and crosslinking modification of PVC [J]. China Plastics, 2022, 36(5): 140-148.
[13]	WANG Rongchen, ZHANG Heng, SUN Huanwei, DUAN Shuxia, QIN Zixuan, LI Han, ZHU Feichao, ZHANG Yifeng. Research progress in preparation and hydrophilic modification of polylactic acid nonwovens for medical and health applications [J]. China Plastics, 2022, 36(5): 158-166.
[14]	ZHAO Xinxin, JIN Xiaodong, SHI Yan, SUN Shibing, LYU Feng, TIAN Yingliang, ZHAO Zhiyong. Surface modification of extruded polystyrene based on ultraviolet⁃ozone irradiation [J]. China Plastics, 2022, 36(5): 8-13.
[15]	CHEN Wenjing, YANG Xiaolong, HAN Shuntao, HAN Ying, MA Xiuqing. Research progress in modification methods of polyacrylonitrile materials [J]. China Plastics, 2022, 36(4): 158-165.

New Research Progress in Modification of Unsaturated Polyester Resin

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments