Application of CAD/CAE in Design of Plastic Injection Moulding for Button Lid

doi:10.19491/j.issn.1001-9278.2009.01.023

China Plastics ›› 2009, Vol. 23 ›› Issue (01): 105-109 .DOI: 10.19491/j.issn.1001-9278.2009.01.023

Application of CAD/CAE in Design of Plastic Injection Moulding for Button Lid

ZHAO Long-zhi, ZHAO Ming-juan, YANG Zi-cheng, ZHANG Shang-bing

1.Key Laboratory of Conveyance and Equipment of Ministry of Education, East China Jiaotong University, Nanchang 330013, China; 2.Liaoyang Jinxing Automobile Inner Decoration Group Co., Ltd, Liaoyang111000, China

Received:2008-10-07 Revised:1900-01-01 Online:2009-01-26 Published:2009-01-26

Abstract

Abstract: Application of Pro/E and Moldflow software in the design of injection mould for the button lid of the automobile inner decoration was introduced in this paper. Using Pro/E software, a product model was formulated, the block configuration and parting surface were determined, which ensured the mould working reliably. By aid of EMX module, the mould frame was designed transferable and adjustable. Based on CAE/CAD technology, the design of product and mould could carried out directly, which decreased the production cycle, improved the quality of the injection mould.

Key words: button lid, Pro/E, parting surface, mould frame, Moldflow

ZHAO Long-zhi, ZHAO Ming-juan, YANG Zi-cheng, ZHANG Shang-bing. Application of CAD/CAE in Design of Plastic Injection Moulding for Button Lid[J]. China Plastics, 2009, 23(01): 105-109 .

[1]	HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan. Injection defect analysis and molding optimization of high⁃gloss grille for an automobile [J]. China Plastics, 2022, 36(9): 70-73.
[2]	WANG Yang, CHENG Lisheng, TAN Jing, YANG Weimin, WANG Ruixue, ZHANG Zhenghe. Moldflow analysis of influence of filler on polyether ether ketone injection molding [J]. China Plastics, 2022, 36(5): 68-74.
[3]	XUE Maoyuan, MEI Yi, LUO Ningkang, TANG Fangyan, XIAO Zhankai. Optimization of Pressure⁃holding Curve for Injection Molding of Automotive Lifter Switch Panel Oriented to Vague Set [J]. China Plastics, 2021, 35(10): 76-82.
[4]	Hong YANG. Moldflow⁃based Optimization Analysis and Die Design of UAV Upper Cover [J]. China Plastics, 2020, 34(6): 92-99.
[5]	LI Ya. Optimization of Balanced Flow for Injection Molding of Soap Box Based on Moldflow [J]. China Plastics, 2019, 33(9): 72-76,99.
[6]	. Structural Analysis of Injection Moulds Based on Moldflow and Abaqus Softwares [J]. China Plastics, 2018, 32(02): 128-133.
[7]	. Design of Injection Molds for Multi-pin Plug Insulators [J]. China Plastics, 2017, 31(05): 98-102 .
[8]	. Moldflow Analysis and Process Optimization for Sequentially Injection-molded Auto Front Bumpers [J]. China Plastics, 2017, 31(03): 64-68 .
[9]	. Optimization of GasAssisted Injectionmolding Process for Vertical Beam Base Parts Based on Moldflow [J]. China Plastics, 2017, 31(01): 75-79 .
[10]	. Design of Injection Molds for Toilet Seats Based on Moldflow and UG Software [J]. China Plastics, 2017, 31(01): 98-104 .
[11]	. Optimization Design of Molding Process for Automobile CD Panels [J]. China Plastics, 2016, 30(06): 102-107 .
[12]	. Optimization and Analysis of Injection Molding Process for Gear Toys Based on BP Neural Network [J]. China Plastics, 2016, 30(06): 108-115 .
[13]	. Design of Combined Cavity Injection Molds for Automobile Inner Decoration [J]. China Plastics, 2016, 30(05): 104-108 .
[14]	. Analysis of Molding Defects and Optimization Design for Automotive Exterior Parts Based on Moldflow [J]. China Plastics, 2016, 30(04): 102-108 .
[15]	. Injection Mold Design of Auto Parts Based on Moldflow [J]. China Plastics, 2016, 30(02): 104-108 .

Application of CAD/CAE in Design of Plastic Injection Moulding for Button Lid

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments