| [1] Mahmoud Rajabian, Mohammad H. Beheshty. Rheology and Flow Behavior of Suspensions of Nanosized Plate-Like Particles in Polyester Resins at the Startup of Shear Flows; Experimental and Modeling[J]. Polymer Composites,2009,30:399-407.[2] Rajendran Baskaran, Muthusamy Sarojadevi and Chinnaswamy Thangavel Vijayakumar. Mechanical and thermal properties of unsaturated polyester/calcium carbonate nanocomposites[J]. Journal of Reinforced Plastics and Composites,2011,30(18):1549-1556.[3]Tarig A. Hassan, Vijaya K. Rangari, Shaik Jeelani. Mechanical and Thermal Properties of Bio-Based CaCO3/Soybean-Based Hybrid Unsaturated Polyester Nanocomposites[J]. Journal of Applied Polymer Science,2013,130:1442-1452.[4] Chen Zhang, Shu Mei Liu,Jun Yi Huang,et al. Flame retardance and thermal properties of a novelphosphorus-containing unsaturated polyester resin/SiO2hybrid nanocomposite[J]. e-Polymers,2009,151:1-12.[5]Sudirman, M. Anggaravidya, E. Budianto,I.et al. Synthesis and Characterization of Polyester-Based Nanocomposite[J]. Procedia Chemistry,2012,4:107-113.[6]Ram Avatar Sharma, Dawid D'Melo, Subhendu Bhattacharya,et,al. Effect of Nano/micro Silica on Electrical Property of Unsaturated Polyester Resin Composites[J]. Transactions On Electrical And Electronic Materials,2012,13(1):31-34. [7]J. D. Rusmirovic, K. T. Trifkovic, B. Bugarski,et al. High performance unsaturated polyester based nanocomposites: Effect of vinyl modified nanosilica on mechanical properties [J]. eXPRESS Polymer Letters,2016,10(2):139-159.[8]Mei Zhang, Raman P.Singh. Mechanical reinforcement of unsaturated polyester by AL2O3 nanoparticles[J]. Materials Letters,2004,58:408-412.[9]R. Baskaran ,M. Sarojadevi ,C. T. Vijayakumar. Unsaturated polyester nanocomposites filled with nano alumina[J]. Journal of Material Science,2011,46:4864-4871.[10]Kanchan Nehete, Ram A. Sharma, Lokesh Chaudhari,et al. Study of Erosion Resistance and Mechanical Properties of Unsaturated Polyester Based Nano-composites[J]. IEEE Transactions on Dielectrics and Electrical Insulation,2012, 19(2):373-382.[11]D.C. Moreira, L.A. Sphaier, J.M.L.Reis,et al. Experimental investigation of heat conduction in polyester-Al2O3 and polyester-CuO nanocomposites[J]. Experimental Thermal and Fluid Science,2011,35:1458-1462.[12]D.C. Moreira, L.A. Sphaier, J.M.L. Reis,et al. Determination of Young,s modulus in polyester-Al2O3 and epoxy-Al2O3nanocomposites using the Digital Image Correlation method[J]. Composites,2012,43:304-309.[13]Xiao Yinghong, Wang Xin, Yang Xujie,et al. Nanometre-sized TiO2 as applied to the modification of unsaturated polyester resin [J]. Materials Chemistry and Physics,2002,77:609-611.[14]Victor M.F. Evora, Arun Shukla. Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites[J]. Materials Science and Engineering A,2003,361:358-366.[15] V. Goodarzi, S. ALI Monemian, F. Maleki,et,al. In situ Radical Copolymerization in Presence of Surface-Modified TiO2 Nanoparticles:Influence of a Double Modification on Properties of Unsaturated Polyester (UP)Nanocomposites[J]. Journal of Macromolecular Science, Part B: Physics,2008,47(3):472-484.[16]Guirong Peng, Qingshan Li, Yanling Yang,et al. Effects of nano ZnO on strength and stability of unsaturated polyester composites[J]. Polymer For Advanced Technologies,2008,19:1629-1634.[17]Guirong Peng, Qingshan Li, Yanling Yang,et al. Degradation of Nano ZnO-Glass Fiber-Unsaturated Polyester Composites[J]. Journal of Material Science,2009, 114:2128-2133.[18]Naga Raju B, Ramji K, Prasad V.S.R.K. Mechanical Properties of Glass Fiber Reinforced Polyester ZnO NanoComposites[J]. Materials Today: Proceedings,2015,2:2817-2825.[19]Juliana Primo Basilio de Souza ,Joao Marciano Laredo dos Reis. Influence of Al2O3 and CuO nanoparticles on the thermal properties of polyester and epoxy-based nanocomposites[J]. Journal of Thermal Analysis and Calorimetry,2015,119:1739-1746.[20]Dong Wang, Yongchun Kan, Xiaojuan Yu,et al. In situ loading ultra-small Cu2O nanoparticles on 2D hierarchicalTiO2-graphene oxide dual-nanosheets: Towards reducing fire hazardsof unsaturated polyester resin[J]. Journal of Hazardous Materials,2016,320:504–512.[21]S. Nazaré, B. K.Kandola ,A. R. Horrocks. Flame-retardant unsaturated polyester resin incorporating nanoclays[J]. Polymer For Advanced Technologies,2006;17:294-303.[22]Byung-Wan Jo, Seung-Kook Park, Do-Keun Kim. Mechanical properties of nano-MMT reinforced polymer composite and polymer concrete [J]. Construction and Building Materials,2008,22:14-20.[23] Mohammad Hosain Beheshty, Mehdy Vafayan, Mehdi Poorabdollah. Low Profile Unsaturated Polyester Resin-Clay Nanocomposite Properties[J]. Polymer Composites,2009,30:629-638.[24] S. Calvo, M. G. Prolongo, C. Salom,et al. Preparation and Thermal-Mechanical Characterization of Nanoclay-Unsaturated Polyester Composites[J]. Journal of Nanoscience and Nanotechnology,2010,10:2863-2869.[25]Manila Chieruzzi, Adio Miliozzi, Josè M. Kenny. Effects of the nanoparticles on the thermal expansion and mechanical properties of unsaturated polyester/clay nanocomposites[J]. Composites,2013,45:44-48.[26] Elham Salehoon,Seyed Javad Ahmadi,Seyed Mohammad Razavi,et al. Thermal and corrosion resistance properties of unsaturated polyester/clay nanocomposites and the effect of electron beam irradiation[J]. Polymer Bulletin,2017,74:1629-1647. |
