金属氧化物对聚氯乙烯热解释放HCl的影响研究

doi:10.19491/j.issn.1001-9278.2009.08.009

中国塑料 ›› 2009, Vol. 23 ›› Issue (08): 39-42 .DOI: 10.19491/j.issn.1001-9278.2009.08.009

金属氧化物对聚氯乙烯热解释放HCl的影响研究

何翊杨守生

中国人民武装警察部队学院

收稿日期:2009-05-06 修回日期:2009-06-03 出版日期:2009-08-26 发布日期:2009-08-26

Effects of Metal Oxides on the Release Characteristic of HCl from the Combustion of Poly (vinyl chloride)

Received:2009-05-06 Revised:2009-06-03 Online:2009-08-26 Published:2009-08-26

摘要/Abstract

摘要：

利用热重分析仪并借助电导率测定法探讨了几种金属氧化物对聚氯乙烯（PVC）热解时HCl释放过程的影响。结果表明，HCl溶液在0 ~ 5.5×10^-4mol / L浓度范围内与电导率呈线性关系。ZnO、Fe₂O₃、CuO、MnO₂使PVC的热解起始温度降低，从而使单位质量PVC释放HCl的起始时间缩短，对PVC热解脱HCl有明显的促进作用。而TiO₂、MoO₃、V₂O₅却使PVC的热解起始温度升高，起始脱HCl时间增加，对HCl的脱出反应有较强的抑制作用。但加入金属氧化物的PVC体系释放HCl总量并没有超过纯PVC体系。

关键词: FONT-FAMILY: 宋体, mso-ascii-font-family: Arial, mso-hansi-font-family: 'Times New Roman', mso-bidi-font-family: Arial, mso-font-kerning: 1.0pt, mso-ansi-language: EN-US, mso-fareast-language: ZH-CN, mso-bidi-language: AR-SA">聚氯乙烯, 金属氧化物, 电导率法, 热重分析仪

Abstract: Thermogravimetry and electric conductivity determinations were carried out to study the effects of metal oxides on the release characteristic of HCl from the combustion of PVC. It was found that the electric conductivity was linearly related to the concentration of HCl solution in the range of 0 ~ 5.5×10^-4moL/L. Zinc oxide (ZnO), ferric oxide (Fe₂O₃), copper oxide (CuO), and manganese dioxide (MnO₂) decreased the initiative temperature of PVC during thermal degradation, and shortened the initiative time of HCl releasing, and thus accelerated the HCl emission. In the other hand, titanium dioxide (TiO₂), molybdenum dioxide (MoO₂), and vanadium oxide (V₂O₅) increased the initiative temperature of PVC during thermal degradation, extended the initiative time of HCl releasing, and thus inhibited the HCl emission. The total volume of HCl released from PVC/metal oxides didnot exceed that of neat PVC.

何翊杨守生. 金属氧化物对聚氯乙烯热解释放HCl的影响研究[J]. 中国塑料, 2009, 23(08): 39-42 .

[1]	李岩, 张伟杰, 唐晓旭, 姜磊, 黄家文, 程德宝. 炭黑含量测定方法标准对比研究[J]. 中国塑料, 2021, 35(10): 120-125.
[2]	段国晨齐暑华吴新明齐海元张翼. 聚吡咯/无机粒子纳米复合材料的研究进展[J]. 中国塑料, 2010, 24(05): 14-19 .
[3]	张锋李斌郭丽华. γ-辐照对PE-HD及PE-HD/木粉复合材料性能影响的研究[J]. 中国塑料, 2009, 23(08): 75-78 .
[4]	刘军辉, 吕科, 杨荣杰. ABS/笼形八乙烯基硅倍半氧烷复合材料的力学性能研究[J]. 中国塑料, 2009, 23(08): 27-30 .
[5]	李海东;林驭寒;聂伟;姬相玲. PLLA-PDLA共聚物薄膜的结晶形态[J]. 中国塑料, 2009, 23(08): 48-52 .
[6]	张超, 谢洪德, 何顺伦. 高CTI阻燃增强PBT复合材料的制备[J]. 中国塑料, 2009, 23(08): 22-26 .
[7]	许向彬. 具有“沙袋”结构的PP/EPDM/CB导电复合材料的形态构建及性能研究[J]. 中国塑料, 2009, 23(08): 43-47 .
[8]	潘龙, 张玉霞, 金志明, 薛平. 单螺杆挤出机高速挤出技术研究进展[J]. 中国塑料, 2009, 23(08): 1-6 .
[9]	胥伟伟马秀清王小武王录国. 螺杆构型对PP/PA6共混物性能和相态结构的影响[J]. 中国塑料, 2009, 23(08): 95-100 .
[10]	王栋彦傅强. 基于共注成型原理的多色仪表盖注塑模具设计[J]. 中国塑料, 2009, 23(08): 101-104 .

金属氧化物对聚氯乙烯热解释放HCl的影响研究

Effects of Metal Oxides on the Release Characteristic of HCl from the Combustion of Poly (vinyl chloride)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价