中国塑料 ›› 2012, Vol. 26 ›› Issue (12): 87-92.DOI: 10.19491/j.issn.1001-9278.2012.12.017

• 加工与应用 • 上一篇    下一篇

高相对分子质量成核剂改性聚丙烯的非等温结晶动力学和力学性能研究

王向东1,刘本刚1,刘海明2,汪文昭1,王青松刘伟杜中杰3   

  1. 1. 北京工商大学
    2. 北京工商大学材料与机械工程学院
    3. 北京化工大学
  • 收稿日期:2020-11-19 修回日期:2012-07-25 出版日期:2012-12-26 发布日期:2012-12-26

Study on Mechanical Property and Non-isothermal Crystallization Kinetics of High Relative Molecular Mass Nucleating Agent Modified Polypropylene

  • Received:2020-11-19 Revised:2012-07-25 Online:2012-12-26 Published:2012-12-26

摘要: 采用差示扫描量热仪(DSC)研究了高相对分子质量成核剂(PNA)改性聚丙烯( PP)在不同的降温速率下的非等温结晶动力学,并使用电子万能试验机测定了PP和PNA改性PP的力学系能。用修正Avrami 方程的Jeziorny 法来处理PNA改性PP 的非等温结晶行为。结果表明,在各个降温速率下,PNA的加入都能够明显降低PP相对结晶度达到50%的时间(t1/2),加入0.3份PNA的PP与纯PP相比,其t1/2仅为纯PP的64.9 %,加入PNA后,结晶动力学常数( Zc ) 增加,结晶速率增加; PP的n值随着降温速率的增加而降低,而加入PNA后,n值随着降温速率的增加而升高,加入PNA后,PP的拉伸强度和冲击强度能够同时提高。

Abstract: Non-isot hermal crystallization behavior of polypropylene and high relative molecular mass nucleating agent(PNA) modified polypropylene was studied using differential scanning calorimet ry (DSC) with the data analyzed with Jeziorny method.Mechanical property of polypropylene and PNA modified polypropylene was studied using electronic universal testing machines. It showed that PNA increased the crystallization rate of PP , indicated by decreased t1/ 2 and increased Zc . t1/ 2 of polypropylene with 0.3 phr PNA decreased to 64.9 % than t1/ 2 of polypropylene. n of polypropylene decreased with cooling rate increased , and n of PNA modified polypropylene increased with cooling rate increased, tensile strength and impact strength of PNA modified polypropylene were higher than polyprolylene.

中图分类号: