中国塑料 ›› 2014, Vol. 28 ›› Issue (04): 28-33 .DOI: 10.19491/j.issn.1001-9278.2014.04.005

• 材料与性能 • 上一篇    

耐候型聚甲醛复合物的制备与性能研究

陶兆增王亚涛李建华金旺武德珍1,汪晓东2   

  1. 1. 北京化工大学2. 北京化工大学材料科学与工程学院
  • 收稿日期:2013-09-11 修回日期:2014-01-09 出版日期:2014-04-15 发布日期:2014-04-15

Preparation and Performance of Weatherresistant Polyoxymethylene Compounds

  • Received:2013-09-11 Revised:2014-01-09 Online:2014-04-15 Published:2014-04-15

摘要: 将二甲基硅氧烷、紫外线吸收剂、光稳定剂、抗氧化剂、紫外线屏蔽剂、甲醛吸收剂与聚甲醛(POM)共混制备了耐候型POM,分析了光老化、热氧老化、水热老化实验后耐候型POM的性能、结构变化及助剂的分布情况。结果表明,耐候助剂提高了POM的力学性能保持率;POM的老化过程主要发生在无定形区域,且对光尤为敏感、热氧次之,对水热的影响较小;耐候助剂主要分布于无定型区域,在发挥耐候效果的同时,由于紫外线照射,本身会被消耗。

关键词: 聚甲醛, 耐候性, 老化, 力学性能

Abstract: The weatherresistant polyoxymethylene(POM)compounds were prepared through meltcompounding of dimethylsiloxane,UV absorbers,UV stabilizers,UV shielding agents,antioxidants,and formaldehyde absorber.The retention of mechanical properties of the POM compounds was investigated the light ageing,thermooxidative aging,and hydrothermal aging.The thermal stability of the weatherresistant POM compounds was evaluated by thermogravimetric analysis before and after aging experiments,and the crystalline structures of POM and the additive distribution in matrix were also investigated by polar optical microscopy.The addition of weatherresistant additives significantly increased the retention of mechanical properties of POM.The aging of POM mainly occurred in the amorphous region,and POM was particularly sensitive to light,heat,and oxygen,but less effect to the hot water.Weatherresistant additives were mainly distributed in the amorphous region,and meanwhile,they performed the weatherresistant effect on POM.These weatherresistant additives were also gradually expended during the aging process with the exposure of UV irradiation.