中国塑料

中国塑料 ›› 2016, Vol. 30 ›› Issue (06): 57-62 .DOI: 10.19491/j.issn.1001-9278.2016.06.012

• 材料与性能 • 上一篇    下一篇

分散相含量对POE/PTT原位成纤增强复合材料性能的影响

董珈豪1,戚远慧1,韦良强2,孙静2,秦舒浩2   

  1. 1. 贵州大学2. 国家复合改性聚合物材料工程技术研究中心
  • 收稿日期:2015-05-13 修回日期:2015-10-19 出版日期:2016-06-26 发布日期:2016-06-26

Effect of Contents of Dispersed Phase on Properties of POE／PTT In-situ Fiber Reinforced Composite

  • Received:2015-05-13 Revised:2015-10-19 Online:2016-06-26 Published:2016-06-26

摘要： 采用微纳叠层共挤制备了乙烯-辛烯共聚物/聚对苯二甲酸丙二醇酯（POE/PTT）原位成纤复合材料，通过扫描电子显微镜分析了分散相PTT含量对其在基体中的形态及分布的影响；讨论了PTT含量对复合材料静态力学性能的影响，利用差示扫描量热仪分析了PTT对POE基体结晶性能的影响。结果表明，随着分散相含量的提高，PTT微纤的数量逐渐增加，降低了POE基体的结晶度，当POE/PTT质量比为85/15时，拉伸强度较纯POE提高了16.9 %。

关键词: 乙烯-辛烯共聚物, 原位成纤, 微纳叠层

Abstract: POE/PTT in-situ fiberized reinforcing composites were prepared by a method of micronano laminated co-extrusion. Morphology of the dispersed phase of PTT in micronano laminated extrusion composites was analyzed by using SEM. Effect of adding quantity of PTT in composites on static mechanical performance was discussed. DSC analysis was used to study the effect of PTT in the complex system on crystallization properties of POE. The result indicated that in the in-situ fiber reinforcing composites, with the dispersed phase content increased, the number of PTT microfibers gradually increased, while the crystallization of POE decreased. Compared with neat POE, the tensile strength of in-situ fiber reinforcing composites was improved by 16.9 % while POE/PTT was 85/15.

Key words: ethylene-l-octene copolymer, in-situ fibrillation, micro-nano lamination

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2024 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发