中国塑料 ›› 2017, Vol. 31 ›› Issue (7): 35-39 .DOI: 10.19491/j.issn.1001-9278.2017.07.007

• 材料与性能 • 上一篇    下一篇

不同发泡剂对高密度聚乙烯/麦秸秆木塑复合材料性能的影响

王阳1,路琴2,王清清1,王禹轩1   

  1. 1. 南京农业大学工学院2. 南京农业大学工学院机械工程系
  • 收稿日期:2017-03-02 修回日期:2017-04-10 出版日期:2017-07-26 发布日期:2017-07-26

Effect of Different Blowing Agents on Properties of PE-HD/Wheat Straw Wood-plastic Composites

  • Received:2017-03-02 Revised:2017-04-10 Online:2017-07-26 Published:2017-07-26

摘要: 以碳酸氢钠(NaHCO3)和偶氮二甲酰胺(AC)为发泡剂,通过热压成型法制备了高密度聚乙烯(PE-HD)/麦秸秆发泡木塑复合材料,并对PE-HD/麦秸秆发泡木塑复合材料的性能进行了研究。结果表明,发泡剂可明显改善木塑复合材料的力学性能及吸水性,且AC做发泡剂的改善效果优于NaHCO3;当添加AC含量为1.5 %(质量分数,下同)时,PE-HD/麦秸秆发泡木塑复合材料的性能最优,此时材料的洛氏硬度为82.9、拉伸强度为13.0 MPa、吸水率为19.53 %、接触角为83.2 (° )。

关键词: 木塑复合材料, 发泡剂, 力学性能, 吸水性, 接触角

Abstract: This paper reported an investigation on the effect of NaHCO3 and azodicarbonamide (AC) foaming agents on high-density polyethylene (PE-HD)/wheat straw wood-plastic composites. The PE-HD/wheat straw foaming wood-plastic composites were prepared by a hot-pressing method, and their various properties were investigated. The results indicated that the addition of foaming agents into the PE-HD/wheat straw wood-plastic composites could improve the mechanical and water-absorption performance significantly. AC foaming agent exhibited a better modification effect than NaHCO3, and the composites achieved the optimum performance with the Rockwell hardness of 82.9, tensile strength of 13.0 MPa, water absorption of 19.53 % and water contact angle of 83.2 ° at AC content of 1.5 wt %.

Key words: wood-plastic composite, foaming agent, mechanical property, water absorption, water contact angle

中图分类号: