Technical Optimization on the Effect of Modified Plastic Formula

doi:10.19491/j.issn.1001-9278.2009.09.001

China Plastics ›› 2009, Vol. 23 ›› Issue (09): 1-6 .DOI: 10.19491/j.issn.1001-9278.2009.09.001

Technical Optimization on the Effect of Modified Plastic Formula

CHEN Yu;CUI Zheng;ZHANG Zhao-hui;ZHANG Sheng

Received:2009-05-11 Revised:1900-01-01 Online:2009-09-26 Published:2009-09-26

Abstract

Abstract: It was suggested in this paper that the formulation for plastics modification should be simplified. More attentions should be paid on the resin itself and functional additives. The employment of crystallization modifier and flame retardant were also discussed.

Key words: modified, plastic, formula, effect, additive, resin, choice, optimization

CHEN Yu, CUI Zheng, ZHANG Zhao-hui, ZHANG Sheng. Technical Optimization on the Effect of Modified Plastic Formula[J]. China Plastics, 2009, 23(09): 1-6 .

[1]	GAO Yonghong, PENG Mengmi, JIN Qingping. Temperature effect on bond performance between glass fiber reinforcement polymer bars and concrete [J]. China Plastics, 2022, 36(9): 16-23.
[2]	YANG Jin, CHEN Pengran, GAO Peixin. Preparation and flame-retardant mechanism of epoxy foams synergistically modified with DIDOPO and POSS/EG [J]. China Plastics, 2022, 36(9): 38-45.
[3]	MIAO Dan, SONG Yuping, WANG Wenqian. Situation of China’s blow molding industry and tendency of key products， process and equipment during the period of “14th Five⁃Year Plan” [J]. China Plastics, 2022, 36(9): 57-62.
[4]	QUAN Shumiao, ZHANG Yanjun, SONG Xiaofei, DU Runping, YU Dan. Status and industrialization progress in dechlorination technologies for waste plastics [J]. China Plastics, 2022, 36(9): 122-130.
[5]	LIN Jianhui, LU Jiahui, WU Xinying, FAN Xueying, DENG Guirong, GAO Liang, MEI Chengfang, YANG Yonggang. Study of uncertainty evaluation in determination of ultimate aerobic biodegradability of degradable materials under controlled composting conditions [J]. China Plastics, 2022, 36(9): 140-147.
[6]	XU Yuxuan, DANG Kaifang, FU Nanhong, JIAO Xiaolong, XIE Pengcheng, YANG Weimin. Research progress in adaptive optimization technology for injection molding process [J]. China Plastics, 2022, 36(9): 180-186.
[7]	HU Chenguang, SU Hang, FENG Xiaoxin, DING Feng, LI Enshuo, FU Jiawei. Preparation and properties of waste glass⁃fiber⁃reinforced plastic⁃modified asphalt [J]. China Plastics, 2022, 36(8): 119-126.
[8]	MA Teng, LIU Qianqian, WEI Xiaoli, SONG Haitao, LI Mingfeng. Influence and countermeasures of silicon and chlorine impurities on waste plastic pyrolysis oil [J]. China Plastics, 2022, 36(8): 127-134.
[9]	YU Jiuyang, WANG Zhonghao, CHEN Qi, XIA Yazhong. Study on properties of advanced resin matrix composites for valve body manufacturing [J]. China Plastics, 2022, 36(8): 16-22.
[10]	BAI Shuiquan, BIAN Jiacheng, WANG Leyuan, YANG Jiahua, DENG Yafeng. Research progress in removal technologies of microplastics in water environment [J]. China Plastics, 2022, 36(8): 166-175.
[11]	YANG Zhi, XI Wang, QIAN Lijun, HU Lishuang. Progressive flame⁃retardant actions of quaternary composite system in rigid polyurethane foams [J]. China Plastics, 2022, 36(8): 28-35.
[12]	XIONG Yiming, SONG Jiling, QIN Shuhao, LONG Xuebin, LU Xianrui. Preparation of modified thermoplastic starch and properties of its composite films with PBAT [J]. China Plastics, 2022, 36(8): 69-72.
[13]	PAN Shenglin, YANG Guibin, YUAN Min, FENG Yahui, HOU Jianjun, ZHANG Zhang, DAI Dongqing, ZHU Haiou, JIANG Yixin. Evolution direction of risk monitoring of cross⁃border recycled plastics under green and low carbon background [J]. China Plastics, 2022, 36(8): 98-106.
[14]	WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu. Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism [J]. China Plastics, 2022, 36(7): 1-7.
[15]	LIU Xuejun. Heat transfer analysis of rotational molding process heated directly with electricity [J]. China Plastics, 2022, 36(7): 109-114.

Technical Optimization on the Effect of Modified Plastic Formula

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments