Current State and Development Trends of New-materials-based Light Conveyor Belts in China

doi:10.19491/j.issn.1001-9278.2010.11.002

China Plastics ›› 2010, Vol. 24 ›› Issue (11): 6-10 .DOI: 10.19491/j.issn.1001-9278.2010.11.002

Previous Articles Next Articles

Current State and Development Trends of New-materials-based Light Conveyor Belts in China

XU Qian-Wei

Received:2010-05-25 Revised:2010-07-12 Online:2010-11-26 Published:2010-11-26

Abstract

Abstract: Characters of the new material light conveyor belts and their current situation and trend were reviewed in this article. The new material light conveyor belts were made of synthetic fabric or non-woven coated with thermoplastics or elastomer, rather than traditional natural rubber. The new material light conveyor belt would play a leading role in the national industry and improve the competitiveness in the national brand in the international market.

Key words: new-materials-based light conveyor belt, thermoplastics, elastomer, synthetic fabrics, non-woven cloth, current state, development trend

XU Qian-Wei. Current State and Development Trends of New-materials-based Light Conveyor Belts in China[J]. China Plastics, 2010, 24(11): 6-10 .

[1]	HUANG Jiawei, HAN Xiaolong, WU You, JIN Yujuan, WANG Zhao. Toughening modification of poly （3⁃hydroxybutyrate⁃co⁃3⁃hydroxyvalerate） by bio⁃based engineering polyester elastomer [J]. China Plastics, 2022, 36(9): 24-31.
[2]	LEI Jingfa, SHEN Qiang, LIU Tao, SUN Hong, YIN Zhiqiang. Influence of fused deposition process parameters on static and dynamic mechanical properties of thermoplastic polyurethane elastomer [J]. China Plastics, 2022, 36(5): 29-35.
[3]	LI Suyuan, LIU Huipeng, GONG Shun, HUANG Guotao, LI Yucai, WU Xin, DENG Jianping, PAN Kai. Preparation and characterization of EVA foaming materials modified with thermoplastic polyamide elastomer [J]. China Plastics, 2022, 36(4): 6-14.
[4]	HU Huanbo, WU Wei, LI Ning, ZHAO Tianyu, ZOU Zhiqiang. Preparation and properties of TPEE/P（AA⁃co⁃AM） water absorbent elastomer [J]. China Plastics, 2022, 36(3): 9-14.
[5]	HUANG Guotao, GUI Yuan, LI Yucai, WU Xin, FENG Xinxing, DENG Jianping, WANG Cao, PAN Kai. Preparation and Characterization of EVA/Nylon Elastomer Microcellular Foaming Materials [J]. China Plastics, 2021, 35(9): 1-7.
[6]	CAO Ying, XU Pengwu, WU Baogou, YANG Weijun, MA Piming. Reinforcement， Toughening and Heat⁃resistant Modification of Recycled Poly（butylene terephthalate） [J]. China Plastics, 2021, 35(4): 86-92.
[7]	ZHENG Debao, ZHAI Qianchao, LIU Guangyuan, WANG Fengwu, WANG Yihui, ZHANG Zhongjie, CHEN Xiangying. Preparation and applications of POE⁃g⁃MAH compatibilizer for adhesive resins [J]. China Plastics, 2021, 35(12): 51-57.
[8]	DENG Yafeng, ZHOU Hongfu, LI Quanlai, LI Jian. Research Progress in Actuator Based on Dielectric Elastomer [J]. China Plastics, 2021, 35(11): 161-172.
[9]	WEN Hui, MA Yufei, XIN Chunling, HE Yadong. Study on Chain Extension and Foaming Behaviors of Thermoplastic Polyamide Elastomer [J]. China Plastics, 2021, 35(10): 14-20.
[10]	TIE Rui, WU You, HAN Xiaolong, SONG Jiajie, WANG Yuchen, KAN Chunyi, YUAN Mengju, JIN Yujuan. Modification of PHBV/EVA Blends with OMMT [J]. China Plastics, 2021, 35(10): 60-67.
[11]	LI Niexin, LI Minggang, TANG Tao, WANG Yi, XING Haiping. Effect of Phase Structure on Foam Structure of PBE/EVA Composite under CO₂ Batch Foaming [J]. China Plastics, 2020, 34(9): 1-8.
[12]	YANG Kang, ZENG Huayu, ZHONG Anlan, YUAN Huilin, ZENG Shu, MA Yulong. Effect of Vinyl Chloride Copolymer Elastomer on Modification and Properties of PVC [J]. China Plastics, 2020, 34(9): 16-21.
[13]	Zijia LI, Enlong ZHEN, Baolei JIAO, Zhen QIAN, Weijun ZHEN, Ling ZHAO. Preparation of PE/POE/CaCO₃ Composites Particles as Channel Flow Regulator with Adjustable Density and Adhesion [J]. China Plastics, 2020, 34(6): 14-19.
[14]	ZHANG Yunqing. A Review on Orientation Model of Long⁃Fiber⁃Reinforced Thermoplastics Fiber [J]. China Plastics, 2020, 34(12): 103-109.
[15]	YE Bading, LU Chenfeng, CHU Nengkui, SHEN Haibo, LI Binbin, XIE Pengcheng. Research Progress in All⁃Electric Injection Molding Machine and Its Application in Auto Parts Electronic Industry [J]. China Plastics, 2020, 34(10): 94-99.

Current State and Development Trends of New-materials-based Light Conveyor Belts in China

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments