| [1] |
ZHANG Lin, XIA Zhangchuan, HE Yadong, XIN Chunling, WANG Ruixue, REN Feng.
Influence of gas flow of plasma jet carrier on modification effect for glass fiber
[J]. China Plastics, 2022, 36(9): 7-15.
|
| [2] |
HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan.
Injection defect analysis and molding optimization of high⁃gloss grille for an automobile
[J]. China Plastics, 2022, 36(9): 70-73.
|
| [3] |
ZHANG Bing.
Study on test of oxidation induction time for random copolymer polypropylene pipe
[J]. China Plastics, 2022, 36(8): 107-109.
|
| [4] |
ZHAO Hongjing, ZHU Jiang.
Study on numerical simulation of two⁃phase extrusion for micro/nano⁃laminated natural rubber/polypropylene
[J]. China Plastics, 2022, 36(8): 110-114.
|
| [5] |
LIU Yi, WANG Ye, SUN Wei, QU Guoxing, XU Xia, YANG Shaolin, YUAN Ning.
Determination of content of transparent nucleating agent in polypropylene using infrared spectroscopy
[J]. China Plastics, 2022, 36(8): 115-118.
|
| [6] |
ZHANG Taozhong, CHEN Xiaolong, HAO Xiaoyu, YU Fujia.
Comparison of mechanical properties and interfacial interactions of polypropylene composites filled with talc， calcium carbonate， and barium sulfate
[J]. China Plastics, 2022, 36(8): 36-41.
|
| [7] |
WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu.
Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism
[J]. China Plastics, 2022, 36(7): 1-7.
|
| [8] |
YU Changyong, XIN Zhong.
Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene
[J]. China Plastics, 2022, 36(7): 121-128.
|
| [9] |
LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei.
Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding
[J]. China Plastics, 2022, 36(7): 37-43.
|
| [10] |
SUN Wei, LIU Yi, LIAO Yunlong, CHEN Junjia.
Study on influence factors for determination of ethylene content in polypropylene powder
[J]. China Plastics, 2022, 36(6): 54-59.
|
| [11] |
WANG Yang, CHENG Lisheng, TAN Jing, YANG Weimin, WANG Ruixue, ZHANG Zhenghe.
Moldflow analysis of influence of filler on polyether ether ketone injection molding
[J]. China Plastics, 2022, 36(5): 68-74.
|
| [12] |
WANG Qingsong.
Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC
[J]. China Plastics, 2022, 36(4): 30-34.
|
| [13] |
WANG Fuyu, GUO Jinqiang, ZHANG Yuxia.
In⁃situ fibrillation methods of polymer blends and their application in PP⁃based blends
[J]. China Plastics, 2022, 36(3): 146-156.
|
| [14] |
LI Rui, JIANG Yanfeng, WU Shuang, AN Yanjie, JIANG Zeyu, ZHANG Mingqiang.
Microstructure and thermal characterization of polypropylene special material for cast films through temperature rising elution fractionation
[J]. China Plastics, 2022, 36(3): 53-57.
|
| [15] |
CAO Zhifeng, ZHAO Lipin, HE Ting, MA Baijun.
Preparation and properties of five⁃layer co⁃extrusion barrier films
[J]. China Plastics, 2022, 36(3): 64-68.
|
