Simulation Analysis and Experimental Study of the Molding Process for PA6/PE-LD  Blends Casting Film

doi:10.19491/j.issn.1001-9278.2015.12.012

China Plastics ›› 2015, Vol. 29 ›› Issue (12): 62-66 .DOI: 10.19491/j.issn.1001-9278.2015.12.012

Simulation Analysis and Experimental Study of the Molding Process for PA6/PE-LD Blends Casting Film

Received:2015-04-09 Revised:2015-04-30 Online:2015-12-26 Published:2015-12-26

Abstract

Abstract: The influence of air gap and draw ratio on thickness and neckin of polyamide 6/low density polyethylene(PA6/PE-LD) casting film was studied through simulation and experiment. It was found that the draw ratio was more influential than air gap on thickness, and the air gap was more influential than draw ratio on neckin.

Key words: polyamide 6, low density polyethylene, casting film, molding process, air gap, draw ratio

[1]	JIA Mingyin, DONG Xianwen, WANG Jiaming, CHEN Ke. Effect of impregnation method on vacuum bag press molding process and properties of polyamide 6 composites [J]. China Plastics, 2022, 36(9): 1-6.
[2]	YU Jiuyang, WANG Zhonghao, CHEN Qi, XIA Yazhong. Study on properties of advanced resin matrix composites for valve body manufacturing [J]. China Plastics, 2022, 36(8): 16-22.
[3]	WEI Simiao, SHAO Lushan, XU Zhun, LIU Yanting, ZHAO Siheng, XU Bo. Flame⁃retardant performance of PA6 modified with hypophosphite/siloxane bi⁃functional compound and diethyl aluminum hypophosphite compound [J]. China Plastics, 2022, 36(7): 129-135.
[4]	CHEN Sheng, LIANG Yingchao, WU Fangjuan, FANG Hui, FAN Xinfeng, CHEN Hui, WANG Yonggang. Preparation and interfacial modification of polyamide 6/bidirectional warp⁃knitted glass fiber composites [J]. China Plastics, 2022, 36(5): 24-28.
[5]	XU Rongxia, WEI Gang, WEI Lilan, WU Jiecui, JIANG Yujiang. Friction and wear properties of PE⁃UHMW modified with nano⁃SiO₂ and PA6 [J]. China Plastics, 2022, 36(4): 47-52.
[6]	ZHANG Jiufu, LUO Kaiqiang, XU Jun, GUO Baohua. Study on comprehensive properties and influencing factors of long glass fiber reinforced PA66 composites [J]. China Plastics, 2022, 36(3): 1-8.
[7]	LI Rui, JIANG Yanfeng, WU Shuang, AN Yanjie, JIANG Zeyu, ZHANG Mingqiang. Microstructure and thermal characterization of polypropylene special material for cast films through temperature rising elution fractionation [J]. China Plastics, 2022, 36(3): 53-57.
[8]	YU Zhixing, LI Yingcheng, WANG Hongxue, PANG Xinlei, WANG Yuyao. Study on laser direct structuring materials based on polyamide 6 and polycarbonate and their fabrication of parts with heterostructure [J]. China Plastics, 2022, 36(2): 8-12.
[9]	YANG Zheng, WANG Zhenhua, LU Shike, LIU Yang, FANG Xiaoming, LI Jiantong, LIU Baoying, DING Tao. Synergistic effect of zinc borate and aluminum diethylphosphinate on flame retardancy of PA6 [J]. China Plastics, 2022, 36(1): 120-127.
[10]	LU Weixin, LU Chong, WANG Bin, HU Jing, WU Jingjing, ZHOU Qinpeng. Effect of Epoxy Modifiers on Properties of PA6/EVOH Blends [J]. China Plastics, 2021, 35(9): 8-14.
[11]	LIU Yao, DING Jianfeng, XIA Zhean, LI Xinxin. Study on Anti⁃thermal Oxidative Aging Mechanism of Polyamide 6/Short⁃cut Carbon Fiber/Copper Salt Composites [J]. China Plastics, 2021, 35(7): 12-17.
[12]	LYU Qiang. Preparation of Glass⁃fiber Reinforced Polyamide 6 with Halogen⁃free Flame Retardant and Permanent Antistatic Performance [J]. China Plastics, 2021, 35(7): 58-62.
[13]	WANG Yu, SUN Wenjie, MA Yulu, XIE Linsheng, JI Huajian. Effect of Compatibilizer on Morphology and Performance of PP/PA6 Microfibrillar Composites [J]. China Plastics, 2021, 35(5): 1-5.
[14]	ZHONG Luohao, KUANG Tangqing, LAI Jiamei, LIU Hesheng, LAI Dewei. Effect of Molding Process on Wall Residual Thickness Distribution and Glass⁃fiber Orientation of Short⁃glass⁃fiber⁃reinforced Polypropylene Molded Pipes [J]. China Plastics, 2021, 35(5): 11-16.
[15]	MA Xiuqing, SUN Kaixin, LI Rui, ZHANG Yajun, FAN Yiqiang. Experimental Study on Optimal Injection⁃molding Process of PMMA Microfluidic Chip [J]. China Plastics, 2021, 35(4): 47-52.

Simulation Analysis and Experimental Study of the Molding Process for PA6/PE-LD Blends Casting Film

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments