京ICP备13020181号-2
© 《China Plastics》
© 《China Plastics》
China Plastics ›› 2022, Vol. 36 ›› Issue (3): 69-74.DOI: 10.19491/j.issn.1001-9278.2022.03.012
• Processing and Application • Previous Articles Next Articles
ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui(), QIAO Linjun
Received:
2021-10-11
Online:
2022-03-26
Published:
2022-03-25
CLC Number:
ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on process parameters for filling process of polypropylene microcellular injection molding under supercritical N2[J]. China Plastics, 2022, 36(3): 69-74.
Add to citation manager EndNote|Ris|BibTeX
URL: https://www.plaschina.com.cn/EN/10.19491/j.issn.1001-9278.2022.03.012
取样位置 | 充模长度/mm |
---|---|
1、6、11、16 | 15.000 |
2、7、12、17 | 133.728 |
3、8、13、18 | 337.061 |
4、9、14、19 | 487.099 |
5、10、15、20 | 655.542 |
取样位置 | 充模长度/mm |
---|---|
1、6、11、16 | 15.000 |
2、7、12、17 | 133.728 |
3、8、13、18 | 337.061 |
4、9、14、19 | 487.099 |
5、10、15、20 | 655.542 |
1 | 安华亮,信春玲,乔林军,等. 微发泡注塑注气系统气涌现象的可视化研究[J]. 中国塑料,2019,33(12):39⁃43. |
AN H L, XIN C L, QIAO L J,et al. Visualization study of gas surge phenomenon in microcellular injection⁃molding gas injection system[J]. China Plastics,2019,33(12):39⁃43. | |
2 | 赵惠英. 微发泡注射成型[J]. 国外塑料,2004,22(5):49⁃50. |
ZHAO H Y. Microcellular foams injection moulding technique[J]. World Plastics,2004,22(5):49⁃50. | |
3 | PARK C B, BALDWIN D F, SUH N P. Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers[J]. Polymer Engineering & Science,2010,35(5):432⁃440. |
4 | 王如波,王勇,夏欣. 微发泡注塑成型技术的研究和应用[J]. 橡塑技术与装备,2019,45(10):30⁃34. |
WANG R B, WANG Y, XIA X. Research and application of micro⁃foaming injection molding technology[J]. Rubber and Plastic Technology and Equipment,2019,45(10):30⁃34. | |
5 | 李帅,赵国群,管延锦,等. 模具型腔气体压力对微发泡注塑件表面质量的影响[J]. 机械工程学报,2015,51(10):79⁃85. |
LI S, ZHAO G Q, GUAN Y J,et al. Influence of mold cavi⁃ty gas pressure on the surface quality of a microcellular injection molding part[J]. Journal of Mechanical Engineering,2015,51(10):80⁃85. | |
6 | KRAMSCHUSTER A, CAVITT R, ERMER D,et al. Effect of processing conditions on shrinkage and warpage and morphology of injection moulded parts using microcellular injection moulding[J]. Plastics Rubber & Composites,2006,35(5):198⁃209. |
7 | KWAG C, MANKE C W, GULARI E. Rheology of molten polystyrene with dissolved supercritical and near⁃critical gases[J]. Journal of Polymer Science Part B Polymer Phy⁃sics,2015,37(19):2 771⁃2 781. |
8 | ROYER J R, GAY Y J, DESIMONE J M,et al. High⁃pressure rheology of polystyrene melts plasticized with C O 2 :experimental measurement and predictive scaling relationships[J]. Journal of Polymer Science:Part B,2000,38(23):3 168⁃3 180. |
9 | 胡瑞生,王毅,张翔,等. 注塑微发泡制品表面质量和发泡形貌的研究进展[J]. 工程塑料应用,2016,44(3):135⁃140. |
HU R S, WANG Y, ZHANG X,et al. Research progress on surface quality and foam morphology of microcellular injection molded parts[J]. Engineering Plastics Application,2016,44(3):135⁃140. | |
10 | 宋吉威,张纯,刘卫,等. 微发泡聚合物材料研究进展[J]. 塑料科技,2013,41(11):102⁃106. |
SONG J W, ZHANG C, LIU W,et al. Research progress in microcellular polymer material[J]. Plastics Science and Technology,2013,41(11):102⁃106. | |
11 | 段涛. 微发泡注塑系统的工艺参数研究及智能化控制[D]. 北京:北京化工大学,2018. |
12 | 李树松,闫宝瑞,安华亮. 基于Moldex3D分析模具温度对PP发泡注塑制品的影响[J]. 中国塑料,2019,31(1):53⁃58. |
LI S S, YAN B R, AN H L. Study on effect of mold temperature on PP⁃foamed injection⁃molded products based on moldex3D analysis[J]. China Plastics,2019,31(1):53⁃58. | |
13 | 韩云,林有希. 微孔注塑成型过程的Moldflow模拟仿真[J]. 合成树脂及塑料,2017,34(1):60⁃65. |
HAN Y, LIN Y X. Moldflow simulation for microcellular injection molding progress[J]. China Synthetic Resin and Plastics,2017,34(1):60⁃65. | |
14 | 贾仕奎,何力,孙洪恩,等. 释压量对发泡行为的影响[J]. 塑料,2010,39(5):68⁃70. |
JIA S K, HE L, SUN H E,et al. Effects of pressure release volume on the foaming behavior[J]. Plastics,2010,39(5):68⁃70. | |
15 | 张允. 结晶与取向对聚丙烯超临界 C O 2 发泡的影响及模压发泡的研究[D]. 北京:北京化工大学,2020. |
16 | 乔林军. 自适应气体注射器及微发泡注气工艺的研究[D]. 北京:北京化工大学,2021. |
17 | 龚维,高家诚,何力,等. 注塑工艺对微发泡PP/云母粉发泡行为影响[J]. 现代塑料加工应用,2009,21(6):5⁃8. |
GONG W, GAO J C, HE L,et al. Effect of injection processing on PP/mica powder foaming behavior[J]. Modern Plastics Processing and Applications,2009,21(6):5⁃8. | |
18 | 张羽标. 超临界氮气微孔注塑成型工艺参数与制品机械性能研究[D]. 郑州:郑州大学,2009. |
[1] | WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu. Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism [J]. China Plastics, 2022, 36(7): 1-7. |
[2] | YU Changyong, XIN Zhong. Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene [J]. China Plastics, 2022, 36(7): 121-128. |
[3] | LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43. |
[4] | SUN Wei, LIU Yi, LIAO Yunlong, CHEN Junjia. Study on influence factors for determination of ethylene content in polypropylene powder [J]. China Plastics, 2022, 36(6): 54-59. |
[5] | SUN Wenbo, XIN Chunling, HE Yadong, ZHAI Yujiao, YAN Baorui. Influence of micro⁃foaming injection molding process on cell structure of glass⁃fiber⁃reinforced PBT products [J]. China Plastics, 2022, 36(5): 1-7. |
[6] | WANG Qingsong. Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC [J]. China Plastics, 2022, 36(4): 30-34. |
[7] | LI Suyuan, LIU Huipeng, GONG Shun, HUANG Guotao, LI Yucai, WU Xin, DENG Jianping, PAN Kai. Preparation and characterization of EVA foaming materials modified with thermoplastic polyamide elastomer [J]. China Plastics, 2022, 36(4): 6-14. |
[8] | WANG Fuyu, GUO Jinqiang, ZHANG Yuxia. In⁃situ fibrillation methods of polymer blends and their application in PP⁃based blends [J]. China Plastics, 2022, 36(3): 146-156. |
[9] | LI Rui, JIANG Yanfeng, WU Shuang, AN Yanjie, JIANG Zeyu, ZHANG Mingqiang. Microstructure and thermal characterization of polypropylene special material for cast films through temperature rising elution fractionation [J]. China Plastics, 2022, 36(3): 53-57. |
[10] | CAO Zhifeng, ZHAO Lipin, HE Ting, MA Baijun. Preparation and properties of five⁃layer co⁃extrusion barrier films [J]. China Plastics, 2022, 36(3): 64-68. |
[11] | SONG Renda, WU Gaojian, CHEN Junxiang, ZHANG Youchen, YANG Weimin, XIE Pengcheng. Preparation and its electromagnetic shielding performance of PP/PET/CNTs foaming composites [J]. China Plastics, 2022, 36(2): 1-7. |
[12] | ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on surface quality optimization of microfoaming injection⁃molded products [J]. China Plastics, 2022, 36(2): 19-26. |
[13] | HUANG Wei, LIU Hesheng, HUANG Xingyuan, ZHANG Wei, KUANG Tangqing, CHEN Zhongshi. Study on high⁃pressure water penetration behavior of square cross⁃sectional pipes based on short⁃glass⁃fiber⁃reinforced polypropylene [J]. China Plastics, 2022, 36(2): 82-88. |
[14] | JIAO Qi, LI Ruilong, CHEN Couxi, ZHANG Shouyu, SONG Chengpeng, CHEN Tonghai, JIANG Ruyuan, ZHENG Pengcheng. Lifetime predication of coal⁃based polypropylene modified with ternary antioxidant composite system [J]. China Plastics, 2022, 36(1): 15-24. |
[15] | ZHANG Wei, CHEN Jie, LI Chenying, HU Libin, TAN Xiao, CAO Jingying. Applications of halogen⁃free flame⁃retardant polyolefin power cable materials [J]. China Plastics, 2022, 36(1): 184-191. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||