京ICP备13020181号-2
© 《China Plastics》
© 《China Plastics》
China Plastics ›› 2022, Vol. 36 ›› Issue (2): 19-26.DOI: 10.19491/j.issn.1001-9278.2022.02.004
• Materials and Properties • Previous Articles Next Articles
ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui(), QIAO Linjun
Received:
2021-09-29
Online:
2022-02-26
Published:
2022-02-23
CLC Number:
ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on surface quality optimization of microfoaming injection⁃molded products[J]. China Plastics, 2022, 36(2): 19-26.
Add to citation manager EndNote|Ris|BibTeX
URL: https://www.plaschina.com.cn/EN/10.19491/j.issn.1001-9278.2022.02.004
1 | 安华亮,信春玲,乔林军,等 . 微发泡注塑注气系统气涌现象的可视化研究[J]. 中国塑料,2019,33(12):39⁃43. |
AN H L , XIN C L , QIAO L J ,et al . Visualization study of gas surge phenomenon in microcellular injection⁃molding gas injection system[J]. China Plastics,2019,33(12):39⁃43. | |
2 | PARK C B , BALDWIN D F ,SUH N P . Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers[J]. Polymer Engineering and Science,1995,35(5):432⁃440. |
3 | ELDUQUE D , CLAVERÍA I , FERNÁNDEZ Á , et al . Methodology to analyze the influence of microcellular injection molding on mechanical properties with samples obtained directly of an industrial component[J]. Polymers & Polymer Composites,2014, 22(8):743⁃752. |
4 | HAYASHI H , MORI T , OKAMOTO M ,et al . Polyethyle⁃ne ionomer⁃based nano⁃composite foams prepared by a batch process and Mucell® injection molding[J]. Materials Science and Engineering: C,2010, 30(1):62⁃70. |
5 | 胡瑞生,王 毅,张 翔,等 . 注塑微发泡制品表面质量和发泡形貌的研究进展[J]. 工程塑料应用,2016,44(3):135⁃140. |
HU R S , WANG Y , ZHANG X ,et al . Research progress on surface quality and foam morphology of microcellular injection molded parts[J]. Engineering Plastics Application,2016,44(3):135⁃140. | |
6 | 何亚东 . 聚合物微发泡材料制备技术应用研究进展[J]. 塑料,2004,33(5):9⁃15. |
HE Y D . Progress of preparation of microcellular polymer foams(MPF)[J]. Plastics,2004,33(5):9⁃15. | |
7 | MA Z L , ZHANG G C , YANG Q ,et al . Microcellular foams of glass⁃fiber reinforced poly(phenylene sulfide) composites generated using supercritical carbon dioxide[J]. Polymer Composites,2015,37(8):2 527⁃2 540. |
8 | 赵正创,欧阳春发,相 旭,等 . 微发泡聚合物材料的研究进展[J]. 化工进展,2016,35(1):209⁃215. |
ZHAO Z C , OUYANG C F , XIANG X ,et al . Research progress in microcellular polymer material[J]. Chemical Industry and Engineering Progress,2016,35(1):209⁃215. | |
9 | 宋吉威,张 纯,刘 卫,等 . 微发泡聚合物材料研究进展[J]. 塑料科技,2013,41(11):102⁃106. |
SONG J W , ZHANG C , LIU W ,et al . Research progress in microcellular polymer material[J]. Plastics Science and Technology,2013,41(11):102⁃106. | |
10 | 张 华,黄汉雄 . 微孔注塑成型研究进展[J]. 塑料科技,2010,38(1):97⁃102. |
ZHANG H , HUANG H X . Research progress of microcellular injection molding[J]. Plastics Science and Technology,2010,38(1):97⁃102. | |
11 | 夏 青 . 微孔发泡注塑工艺研究[D]. 北京:北京化工大学,2012. |
12 | 张玉霞 . 微孔塑料注射成型技术[M]. 北京:机械工业出版社,2013:190⁃192. |
13 | 乔林军 . 自适应气体注射器及微发泡注气工艺的研究[D]. 北京:北京化工大学,2021. |
14 | 祝首元 . 基于联合仿真的微发泡注塑轻量化制品的性能研究[D]. 北京:北京化工大学,2020. |
15 | 张 聪 . 基于超临界 C O 2 制备超轻热塑性聚合物工艺及设备的研究[D]. 青岛:青岛科技大学,2015. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||