Paper shredder plastic parts shell large injection mold design

doi:10.19491/j.issn.1001-9278.2024.07.018

Abstract

Abstract:

Taking the plastic shell of paper shredder as the research object， a large hot runner plastic mold with a complex structure was designed. According to the structural characteristics of the plastic parts and the requirement of use， a two⁃hot⁃nozzle⁃feeding mode was designed in the mold to ensure the balance of feeding. A sliding block core⁃pulling mechanism of female die tunnel driven by an oil cylinder， a sliding block core pulling mechanism driven by an overhead cylinder， a sliding block core⁃pulling mechanism driven by a ground side⁃inclined pin together with a time⁃delay elastic pin， and five inclined pin core⁃pulling mechanisms were designed. These designs solved the demolding problem in all of inverted plastic parts. A U⁃shaped waterway was designed for the female die. The uniform distribution way for water wells was adopted for the male die， and the water⁃cooling system on the slider was separately designed. With such designs， the mold exhibited excellent performance in the molding cycle and quality of plastic parts in the actual production process. The die ejection was mainly completed by a declined pin core⁃pulling mechanism and a straight ejecting mechanism.

Key words: paper shredder, hot runner, injection mold, core?pulling mechanism, mold exhaust, waterway design

CLC Number:

TQ320.66⁺2

ZHAO Liping, ZHANG Xiaojuan, PENG Xinhua. Paper shredder plastic parts shell large injection mold design[J]. China Plastics, 2024, 38(7): 106-111.

Figures/Tables 10

Fig.1. 3D structure diagram of plastic parts

Fig.2. 3D schematic diagram of the feed system

Fig.3. 3D sectional view of the female die tunnel slider oil cylinder core pulling mechanism

Fig.4. 3D structure diagram of core pulling mechanism of slider A and spring delay mechanism

Fig.5. 3D schematic diagram of core pulling mechanism of slider B

Fig.6. 3D diagram of angle of pin core⁃pulling mechanism and straight ejecting mechanism

Fig.7. 3D structure diagram of the exhaust system structure

Fig.8. 3D structure diagram of the die cooling system

Fig.9. Mold assembly drawing

Fig.10. Photos of the mold forming product

References 14

1	石峰，朱超挺，周天绮，等.医药中转箱隧道滑块二次抽芯机构及简化型四次开模三板模具设计［J］.中国塑料，2019，33（8）：118⁃126.
	SHI F， ZHU C T， ZHOU T Q， et al. Design of secondary core⁃pulling mechanism of sliding block in tunnel of medical transfer box and simplified four⁃times open⁃mold three⁃plate die ［J］. China Plastics，2019，33（8）：118⁃126.
2	谭补辉，张云，熊建武，等.船舶轮机隔离盖斜顶滑块复合机构模具设计［J］.塑料，2023，52（3）：156⁃160.
	TAN B H， ZHANG Y， XIONG J W， et al. Die design of sliding block compound mechanism for marine turbine isolation cover ［J］. Plastics，2023，52（3）：156⁃160.
3	蔡厚道，王训杰，陈云，等.汽车马鞍盖板滑块斜顶机构热流道注塑模具设计［J］.塑料工业，2023，51（8）：86⁃91.
	CAI H D， WANG X J， CHEN Y，et al. Design of hot runner injection mold for inclined top mechanism of car saddle cover slider ［J］. Plastics Industry，2023，51（8）：86⁃91.
4	路英华，肖国华，李亚峰等.扫地机手柄侧盖多元构件顶出机构注塑模设计［J］.工程塑料应用，2023，51（10）：106⁃112.
	LU Y H， XIAO G H， LI Y F，et al. Design of injection mold for ejector mechanism of multi⁃component component on side cover of sweeper handle ［J］. Application of Engineering Plastics，2023，51（10）：106⁃112.
5	刘军，刘俊.磁场罩热流道注射模设计［J］.塑料，2023，52（4）：183⁃187.
	LIU J， LIU J. Design of injection mold for hot runner of magnetic field cover ［J］. Plastics，2023，52（4）：183⁃187.
6	黄继战，范玉，肖根先.温控器面壳注塑模具设计［J］.工程塑料应用，2023，51（10）：118⁃124.
	HUANG J Z， FAN Y， XIAO G X. Design of injection mold for temperature controller shell ［J］. Engineering Plastics Application，2023，51（10）：118⁃124.
7	叶卫文，陈镇森，姜炳春，等.汽车热交换系统斜向管口气室模具设计［J］.中国塑料，2023，37（9）：102⁃108.
	YE W W， CHEN Z S， JIANG B C， et al. Mold design of inclined pipe chamber for automotive heat exchange system ［J］. China Plastics，2023，37（9）：102⁃108.
8	赵利平，温煌英，罗哲，等.汽车灯饰面盖零件热流道双色注塑模具设计［J］.工程塑料应用，2022，50（3）：96⁃100.
	ZHAO L P， WEN H Y， LUO Z，et al. Design of two⁃color injection mold for hot runner for automotive lighting cover parts ［J］. Application of Engineering Plastics，2022，50（3）：96⁃100.
9	胥永林，冯国树，张维合，等.汽车后视镜支架大型注塑模具设计［J］.塑料，2022，51（3）：104⁃107，148.
	XU Y L， FENG G S， ZHANG W H，et al. Design of large injection mold for automotive rearview mirror bracket ［J］. Plastics，2022，51（3）：104⁃107，148.
10	赵利平，张维合，彭新华.汽车座椅侧护板注塑模具创新设计［J］.中国塑料，2023，37（10）：139⁃143.
	ZHAO L P， ZHANG W H， PENG X H. Innovative design of injection mold for car seat side guard ［J］. China Plastics，2023，37（10）：139⁃143.
11	周纪委，翟剑敏，王明伟，等.汽车中控后端盖板气辅注塑模具设计［J］.工程塑料应用，2023，51（7）：103⁃109.
	ZHOU J W， ZHAI J M， WANG M W，et al. Design of gas⁃assisted injection mold for automotive center control rear cover ［J］. Engineering Plastics Application，2023，51（7）：103⁃109.
12	石波，铁盛武，沈亮涵，等.汽车翼子板三角饰盖高光双色注塑模具设计［J］.工程塑料应用，2023，51（7）：110⁃115.
	SHI B， TIE S W， SHEN L H，et al. Design of high⁃light two⁃color injection mold for triangular cover of automotive fender ［J］. Engineering Plastics Application，2023，51（7）：110⁃115.
13	赵利平，秦瑞亮，侯贤州，等.弯管热流道模具的旋转抽芯脱模设计［J］.塑料科技，2023，51（2）：84⁃87.
	ZHAO L P， QIN R L， HOU X Z，et al. Design of rotary core⁃pulling and demoulding of hot runner Mold for Bending pipe ［J］. Plastic Science and Technology，2023，51（2）：84⁃87.
14	赵利平，张维合，侯贤州，等.电热水壶手柄旋转抽芯模具设计［J］.工程塑料应用，2023，51（3）：82⁃87.
	ZHAO L P， ZHANG W H， HOU X Z，et al. Design of rotary core⁃pulling die for electric kettle handle ［J］. Engineering Plastics Application，2023，51（3）：82⁃87.

[1]	REN Qinghai, SUN Zudong, GENG Tie. Orthogonal precision design optimization of gas⁃assisted molding process parameters [J]. China Plastics, 2024, 38(7): 62-67.
[2]	YANG Lian, JIANG Jing, JIA Caiyi, XIE Yuehan, WANG Xiaofeng, LI Qian. Preparation of polyamide 6 microfiber reinforced polypropylene composite and its property of chemical foam injection molding [J]. China Plastics, 2024, 38(6): 12-18.
[3]	CHEN Hao, JIAO Xiaolong, ZHU Ningdi, DONG Zhengyang, ZHANG Jianfeng, ZHAO Peng. Ultrasonic on⁃line measurement of polymer melt information in injection molding [J]. China Plastics, 2024, 38(4): 60-66.
[4]	LIU Qingdong. Design of injection mold with two⁃step core⁃pulling mechanism for intake manifold of a motorcycle engine [J]. China Plastics, 2024, 38(4): 88-91.
[5]	GONG Qiang, JIN Zhiming. Research progress in quality prediction and control of injection molded products based on model algorithms [J]. China Plastics, 2024, 38(4): 98-102.
[6]	FEI Qiang, ZHANG Weihe. Design of complicated core pulling injection mold for left/right cover of car air tank [J]. China Plastics, 2024, 38(1): 112-116.
[7]	JIAO Xiaolong, DANG Kaifang, ZHOU Yang, MA Yitao, WANG Jinling, XIE Pengcheng. New trends in injection molding industry from “K⁃show 2022” in Germany [J]. China Plastics, 2024, 38(1): 49-54.
[8]	HUA Shaozhen, CAO Wei. Numerical algorithms for injection molding based on Giesekus viscoelastic model [J]. China Plastics, 2023, 37(9): 57-63.
[9]	QIN Sen, HE Hezhi, ZHANG Tao, HUANG Zhaoxia, QU Jinping. Study on volume⁃pulsation injection⁃molding technology for plastics [J]. China Plastics, 2023, 37(9): 96-101.
[10]	CAI Houdao, LI Guijin, CHEN Yun. Optimization of cooling system and mold design for automobile saddle cover panel [J]. China Plastics, 2023, 37(12): 109-114.
[11]	ZHOU Jiwei, WANG Mingwei, WU Di, ZHANG Wenchao, LIN Lianming, YU Junwei. Design of gas assisted injection mold construction for left and right window frame trim panels of automobile tailgate [J]. China Plastics, 2023, 37(11): 141-148.
[12]	ZHAO Liping, ZHANG Weihe, PENG Xinhua. Innovative design of injection mold for car seat side guard plate [J]. China Plastics, 2023, 37(10): 139-143.
[13]	HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan. Injection defect analysis and molding optimization of high⁃gloss grille for an automobile [J]. China Plastics, 2022, 36(9): 70-73.
[14]	XU Yuxuan, DANG Kaifang, FU Nanhong, JIAO Xiaolong, XIE Pengcheng, YANG Weimin. Research progress in adaptive optimization technology for injection molding process [J]. China Plastics, 2022, 36(9): 180-186.
[15]	WANG Xiaodong, WANG Quan, CHEN Tuo, ZHENG Yue. Optimization of multi⁃objective parameters for double color injection⁃molding based on grey relational analysis and entropy weight method [J]. China Plastics, 2022, 36(7): 115-120.