悬浮法PEB-g-MAN/SAN共混物的热性能与耐老化性能研究

doi:10.19491/j.issn.1001-9278.2010.11.010

中国塑料 ›› 2010, Vol. 24 ›› Issue (11): 43-48 .DOI: 10.19491/j.issn.1001-9278.2010.11.010

悬浮法PEB-g-MAN/SAN共混物的热性能与耐老化性能研究

王霞朱勇平王炼石蔡彤旻张安强

华南理工大学材料科学与工程学院华南理工大学材料科学与工程学院华南理工大学材料科学与工程学院

收稿日期:2010-08-10 修回日期:2010-09-19 出版日期:2010-11-26 发布日期:2010-11-26

Thermal Performance and Aging Properties of the PEB-g-MAN/SAN Blends Synthesized by Suspension Polymerization

Received:2010-08-10 Revised:2010-09-19 Online:2010-11-26 Published:2010-11-26

摘要/Abstract

摘要： 用悬浮接枝共聚法制备了乙烯-1-丁烯共聚物（PEB）与甲基丙烯酸甲酯和丙烯腈共聚物的接枝共聚物（PEB-g-MAN），并用其增韧苯乙烯-丙烯腈共聚物（SAN）。用动态力学分析、热重分析、人工气候老化和热氧老化试验等方法研究了PEB-g-MAN/SAN共混物的热性能与耐老化性能。结果表明，PEB-g-MAN/SAN共混物的PEB组分和SAN组分的玻璃化转变温度（Tg）之差明显低于PEB弹性体与SAN树脂的Tg之差，表明PEB-g-MAN与SAN树脂具有良好的相容性；PEB-g-MAN/SAN共混物的热稳定性明显优于SAN树脂，耐气候老化黄变性能和热氧老化后缺口冲击强度保持率明显优于丙烯腈-苯乙烯-丁二烯共聚物（ABS），而热氧老化后的拉伸、弯曲强度则稍逊于ABS。

关键词: 乙烯-1-丁烯共聚物, 甲基丙烯酸甲酯, 丙烯腈, 苯乙烯-丙烯腈共聚物, 悬浮法, 热稳定性, 耐老化性能

Abstract: PEB-g-MAN, synthesized by suspension grafting copolymerization of methyl methacrylate and acrylonitrile onto poly(ethene-co-1-butene) (PEB), was prepared to toughen styrene-acrylonitrile copolymer(SAN). Thermal performance and aging properties of the PEB-g-MAN/SAN blends were studied using DMA, TG/DTG, accelerated weathering aging, and thermal oxidative aging tests. DMA analysis showed that the differences of glass transition temperature (Tg) between PEB phrase and SAN phrase in PEB-g-MAN/SAN blends were apparently less than those between PEB elastomer and SAN resin, indicating PEB-g-MAN and SAN were partially compatible. TG/DTG results revealed that PEB-g-MAN/SAN blends performed better thermal stability than SAN resin. The aging test demonstrated the weatherability and yellowing resistance properties of PEB-g-MAN/SAN blends were much better than those of ABS. After thermal oxidation aging test, the retention of notched impact strength of PEB-g-MAN/SAN blends was superior to ABS, while the tensile strength and the flexural strength were slightly less than ABS.

Key words: poly(ethene-co-1-butene), methyl methacrylate, acrylonitrile, styrene-acrylonitrile copolymer, suspension polymerization, thermal stability, aging property

王霞朱勇平王炼石蔡彤旻张安强. 悬浮法PEB-g-MAN/SAN共混物的热性能与耐老化性能研究[J]. 中国塑料, 2010, 24(11): 43-48 .

. Thermal Performance and Aging Properties of the PEB-g-MAN/SAN Blends Synthesized by Suspension Polymerization[J]. China Plastics, 2010, 24(11): 43-48 .

[1]	陈文静, 杨小龙, 韩顺涛, 韩颖, 马秀清. 聚丙烯腈材料改性方法及研究进展[J]. 中国塑料, 2022, 36(4): 158-165.
[2]	张书诚, 唐文斌, 于天娇, 徐珍珍, 邢剑. 不同含量配比制备聚氨酯泡沫及其性能研究[J]. 中国塑料, 2022, 36(3): 104-109.
[3]	李泽洋, 岑兰, 陈胜, 陈伟杰, 杜兵华, 张二帅. 羧基丁腈橡胶/PA12热塑性弹性体的制备及性能研究[J]. 中国塑料, 2022, 36(3): 15-20.
[4]	谢玉, 王立梅, 齐斌. 交联壳聚糖/蒙脱土复合膜的制备及性能研究[J]. 中国塑料, 2022, 36(3): 58-63.
[5]	郝春波, 刘万胜, 赵欣麟, 王岩, 王月. 本体ABS用橡胶国产化替代分析及评价[J]. 中国塑料, 2022, 36(3): 89-95.
[6]	张文龙, 张琳, 陈宇. 耐油增容剂POE⁃g⁃AN对EVA/PE⁃LLD电缆料性能影响的研究[J]. 中国塑料, 2022, 36(10): 54-59.
[7]	刘金成, 陈谦, 刘玉佩, 高萌, 赵先辉. 甲基丙烯酸甲酯的合成技术研究进展[J]. 中国塑料, 2022, 36(1): 178-183.
[8]	孙正艋, 张明旭, 张馨宁, 梁策, 张海亮, 李云辉, 马玉芹. 纳米玻璃粉掺杂双酚A型环氧树脂基复合材料的热稳定性能研究[J]. 中国塑料, 2021, 35(9): 15-20.
[9]	吕强. 无卤阻燃永久抗静电玻璃纤维增强聚酰胺6材料的研制[J]. 中国塑料, 2021, 35(7): 58-62.
[10]	盛天阳, 谭晶, 张政和, 高晓东, 于景超, 程礼盛, 杨卫民. 微纳层叠聚丙烯腈凝胶流动特性的数值模拟研究[J]. 中国塑料, 2021, 35(7): 74-79.
[11]	李璐, 刘飞翔, 罗慧玲, 陈国华. 石墨烯复合浆料应用于ABS塑料电镀前表面处理[J]. 中国塑料, 2021, 35(6): 40-45.
[12]	孟浩, 袁美霞, 华明. ABS的3D打印制品表面质量研究[J]. 中国塑料, 2021, 35(6): 74-79.
[13]	张轶竣, 张睿智, 郭成成, 沈强, 罗国强. PMMA/CNT微发泡密度梯度吸能材料的优化设计研究[J]. 中国塑料, 2021, 35(5): 32-39.
[14]	马秀清, 孙凯欣, 李瑞, 张亚军, 范一强. PMMA微流控芯片最佳注射成型工艺的实验研究[J]. 中国塑料, 2021, 35(4): 47-52.
[15]	孙琦伟, 陈宇宏, 董书源, 郎建林, 周晓伟, 张云. PMMA/PC复合平板叠层注射压缩成型翘曲变形计算模拟[J]. 中国塑料, 2021, 35(4): 53-59.

悬浮法PEB-g-MAN/SAN共混物的热性能与耐老化性能研究

Thermal Performance and Aging Properties of the PEB-g-MAN/SAN Blends Synthesized by Suspension Polymerization

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价