1 |
马昊鹏, 高丽洁, 焦志伟, 等. 非溶剂致相分离3D打印/复印成型技术研究[J]. 中国塑料, 2020, 34(12): 1⁃7.
|
|
MA H P, GAO L J, JIAO Z W, et al. Research on non⁃solvent induced phase separation technology for 3D printing /copying forming[J]. China Plastics, 2020, 34(12): 1⁃7.
|
2 |
田银彩, 王延伟, 王 鹏, 等. 聚丙烯腈/棉纤维素薄膜的制备与性能研究[J]. 中国塑料, 2016, 30(5): 41⁃45.
|
|
TIAN Y C, WANG Y W, WANG P, et al. Preparation and properties of polyacrylonitrile/cotton cellulose films[J]. China Plastics, 2016, 30(5): 41⁃45.
|
3 |
刘晓辉, 胡晓辉. 丙烯腈与亲水性单体的自由基共聚合及聚合物的成膜性[J]. 天津工业大学学报, 2016, 35(4): 6⁃9.
|
|
LIU X H, HU X H. Radical copolymerization of acrylonitrile and hydrophilic monomer and film forming exploration of polymer[J]. Journal of Tiangong University, 2016, 35(4): 6⁃9.
|
4 |
李燕芬, 刘元法, 郭 静, 等. 聚丙烯腈超滤膜的亲水改性及抗污染性能[J]. 大连工业大学学报, 2020, 39(6): 449⁃454.
|
|
LI Y F, LIU Y F, GUO J, et al. Antifouling properties of PAN ultrafiltration membrane after hydrophilic modification[J]. Journal of Dalian Polytechnic University, 2020, 39(6): 449⁃454.
|
5 |
DONG X, ZHOU Q Z, LI L, et al. Flame retardance enhancement of polyacrylonitrile with dimethyl vinyl phosphonate[J]. Journal of Applied Polymer Science, 2021, 138(30).
|
6 |
赵斯梅. 无卤阻燃聚丙烯腈的合成及性能分析[J]. 山东纺织经济, 2012(4): 49⁃51.
|
|
ZHAO S M. Synthesis of nonhalogen⁃flame retardant/PAN and performance analysis[J]. Shandong Textile Economy, 2012(4): 49⁃51.
|
7 |
魏子行,秦 统,奚桢浩,等.DOPO基阻燃腈纶聚合物的制备与燃烧性能[J].高分子材料科学与工程, 2021, 37(4): 40⁃48.
|
|
WEI Z X, QIN T, XI Z H, et al. Preparation and combustion behavior of copolymerized polyacrylonitrile using DOPO⁃based flame retardant[J]. Polymer Materials Science & Engineering, 2021, 37(4): 40⁃48.
|
8 |
陈志军, 黄年华, 柳 浩. 聚丙烯腈纤维接枝丙烯酰胺亲水改性的研究[J]. 武汉纺织大学学报, 2013, 26(6): 32⁃36.
|
|
CHEN Z J, HUANG N H, LIU H. The hydrophilic properties of polyacrylonitrile fiber modified with acrylamide[J]. Journal of Wuhan Textile University, 2013, 26(6): 32⁃36.
|
9 |
NIE Q F, DAI Z W, XU K Z. Acrylonitrile⁃based copolymer membranes containing reactive groups: fabrication dual⁃layer biomimetic membranes by the immobilization of biomacromolecules[J]. Journal of Membrane Science, 2005,264: (1/2):20⁃26.
|
10 |
桑明珠, 王士华, 龙 柱, 等. 碳纳米管/石墨烯协同改性碳纤维复合材料的制备及性能[J]. 中国塑料, 2018, 32(6): 124⁃130.
|
|
SANG M Z, WANG S H, LONG Z, et al. Preparation and properties of carbon fiber⁃based composites co⁃modified with graphene and carbon nanotubes[J]. China Plastics, 2018, 32(6): 124⁃130.
|
11 |
张丽巧, 李 茹, 王 娜, 等. 低温氨等离子体改性聚丙烯腈超滤膜的研究[J]. 西安工程大学学报, 2016, 30(1): 28⁃32.
|
|
ZHANG L Q, LI R, WANG N, et al. Modified PAN ultrafiltration membranes with low⁃temperature NH3 plasma[J]. Journal of Xi'an Polytechnic University, 2016, 30(1): 28⁃32.
|
12 |
REN Y L, QIN Y W, LIU X H, et al. Flame⁃retardant polyacrylonitrile fabric prepared by ultraviolet‐induced grafting with glycidyl methacrylate followed by ammoniation and phosphorylation[J]. Journal of Applied Polymer Science, 2018, 135(41) .
|
13 |
王 晓, 杨启鹏, 邵 伟, 等. 羟基磷灰石/聚丙烯腈光接枝复合膜的制备与表征[J]. 纺织学报, 2012, 33(4): 24⁃28.
|
|
WANG X, YANG Q P, SHAO W, et al. Preparation and characterization of hydroxyapatite / polyacrylonitrile photografting composite film[J]. Journal of Textile Research, 2012, 33(4): 24⁃28.
|
14 |
刘晓辉, 彭 博, 李禹墨, 等. 植酸铜/聚丙烯腈改性膜的制备及阻燃性能[J]. 天津工业大学学报, 2021, 40(1): 12⁃17.
|
|
LIU X H, PENG B, LI Y M, et al. Preparation of copper phytate / polyacrylonitrile modified membrane and its flame retardant property[J]. Journal of Tiangong University, 2021, 40(1): 12⁃17.
|
15 |
刘芸菲, 李凤美, 陈彦坤, 等. MPB阻燃剂的合成及在聚丙烯腈中的应用[J]. 合成技术及应用, 2019, 34(3): 17⁃22.
|
|
LIU Y F, LI F M, CHEN Y K, et al. Study on structure and performance of nitrogen⁃phosphorus⁃boron flame retardant polyacrylonitrile[J]. Synthetic Technology & Application, 2019, 34(3): 17⁃22.
|
16 |
KARBOWNIK I, RAC O, RYBICKI T, et al. Effect of doping polyacrylonitrile fibers on their structural and mechanical properties[J]. Polymer: The International Journal for the Science and Technology of Polymers, 2015.
|
17 |
赵东宇, 王淑敏, 郭巧凤, 等. 碳纳米管/聚丙烯腈复合材料的制备及力学性能[J]. 黑龙江大学自然科学学报, 2012, 29(5): 635⁃638,643.
|
|
ZHAO D Y, WANG S M, GUO Q F,et al. Preparation and mechanical performance of carbon nanotubes/polyacrylonitrile composites[J]. Journal of Natural Science of Heilongjiang University,2012, 29(5): 635⁃638,643.
|
18 |
KAUSTUBH R K, SANDEEP P B. Novel polyacrylonitrile / potassium sodium niobate composites with superior dielectric and thermal properties[J]. Composites Communications, 2017(5): 8⁃12.
|
19 |
ELIAS UMD, RAMA K L, KIM H N, et al. Preparation and properties of reduced graphene oxide / fused silica composites[J]. Carbon, 100.
|
20 |
贾 琳, 王西贤, 张海霞, 等. 聚丙烯腈/二氧化钛纳米纤维的紫外线防护性能[J]. 纺织学报, 2017, 38(7): 18⁃22.
|
|
JIA L, WANG X X, ZHANG H X, et al. Ultraviolet protective properties of polyacrylonitrile / TiO2 nanofiber[J]. Journal of Textile Research, 2017, 38(7): 18⁃22.
|
21 |
田银彩, 林秋虎. 静电纺聚丙烯腈/MgO复合膜的制备及阻燃性能研究[J/OL]. [2021⁃07⁃06]. .
|
22 |
王 辉, 陈 恒, 薛梦侠, 等. 蔗糖对聚丙烯腈膜的共混改性研究[J]. 化工新型材料, 2017, 45(12): 225⁃227.
|
|
WANG H, CHEN H, XUE M X, et al. Study on modification of polyacrylonitrile membrane by blending sucrose[J]. New Chemical Materials, 2017, 45(12): 225⁃227.
|
23 |
张慧敏, 付中禹. KMnO4对改性聚丙烯腈纤维物理与化学结构的影响[J]. 塑料工业, 2021, 49(2): 68⁃73.
|
|
ZHANG H M, FU Z Y. Effect of KMnO4 on the physical and chemical structure of modified polyacrylonitrile fiber[J]. China Plastics Industry, 2021, 49(2): 68⁃73.
|
24 |
刘 群, 丁 斌, 关 昶, 等.腈纶的磷氮系膨胀型阻燃整理研究[J]. 毛纺科技, 2016, 44(12): 31⁃33.
|
|
LIU Q, DING B, GUAN X, et al. Application of intumescent flame retardant containing phosphorus and nitrogen to polyacrylonitrile fiber[J]. Wool Textile Journal, 2016, 44(12): 31⁃33.
|
25 |
周 存, 左春龙. 高疏水PAN的制备及其性能[J]. 中国塑料, 2020, 34(4): 12⁃19.
|
|
ZHOU C, ZUO C L. Preparation and properties of high hydrophobic polyacrylonitrile fiber[J]. China Plastics, 2020, 34(4): 12⁃19.
|
26 |
张娇娇, 左晓飞, 覃小红, 等. 聚多巴胺涂覆改性聚丙烯腈纳米纤维膜及其油水分离性能[J]. 东华大学学报(自然科学版), 2018, 44(1): 10⁃17,32.
|
|
ZHANG J J, ZUO X F, QIN X H, et al. Properties of polydopamine⁃coated electrospun polyacrylonitrile membrane in oil / water separation[J]. Journal of Donghua University(Natural Science), 2018, 44(1): 10⁃17,32.
|
27 |
全 帅. 拉伸取向对聚丙烯腈纤维性能的影响[D]. 黑龙江:黑龙江大学, 2011. DOI:10.7666/d.y1939644 .
|
28 |
DALE G, DESA P, ABHIRAMAN S A. Exploratory experiments in the conversion of plasticized melt spun PAN⁃based precursors to carbon fibers[J]. Carbon, 1988, 26(3): 403⁃411.
|
29 |
BYUNG G M, TAE W S, BYOUNG C K, et al. Plasticization behavior of polyacrylonitrile and characterization of acrylic fiber prepared from the plasticized melt[J]. Polymer Journal.
|
30 |
LINDA V, BORIS L, INBAL D, et al. Processing and characterization of extruded drawn MWNT⁃PAN composite filaments[J]. Composites Part a Applied Science & Manufacturing, 2007, 38(5): 1 354⁃1 362.
|
31 |
LI X, QIN A W, ZHAO X Z. The plasticization mechanism of polyacrylonitrile / 1⁃butyl⁃3⁃methylimidazolium chloride system[J]. Polymer, 2014, 55(22): 5 773⁃5 780.
|
32 |
ZHENG Y, HAN K Q, LIU S P, Et al. Structure and properties of partially cyclized polyacrylonitrile⁃based carbon fiber⁃precursor fiber prepared by melt⁃spun with ionic liquid as the medium of processing[J]. Polymer Engineering and Science, 2015.
|
33 |
陈 磊, 刘淑萍, 余木火, 等. 含木质素的聚丙烯腈增塑熔融纺丝[J]. 材料科学与工程学报, 2014, 32(6): 893⁃896,902.
|
|
CHEN L, LIU S P, YU M H, et al. Plasticized melt spinning of polyacrylonitrile/lignin blends[J]. Journal of Materials Science and Engineering, 2014, 32(6): 893⁃896,902.
|