3D打印用ABS研究进展

doi:10.19491/j.issn.1001-9278.2019.12.018

中国塑料 ›› 2019, Vol. 33 ›› Issue (12): 101-108.DOI: 10.19491/j.issn.1001-9278.2019.12.018

• 综述 • 上一篇

3D打印用ABS研究进展

叶旋,涂华锦

河源职业技术学院机电工程学院

收稿日期:2019-05-20 修回日期:2019-05-30 出版日期:2019-12-26 发布日期:2020-01-17
基金资助:
2017年度广东省教育厅青年创新人才类项目（自然科学）（2017GkQNCX075、2017GkQNCX076）

Research Progress in ABS Materials for 3D Printing

YE Xuan, TU Huajin

Mechanical and Electrical Engineering College, Heyuan Polytechnic

Received:2019-05-20 Revised:2019-05-30 Online:2019-12-26 Published:2020-01-17

摘要/Abstract

摘要： 介绍了三维（3D）打印技术、熔融沉积成型（FDM）与3D打印用丙烯腈丁二烯苯乙烯共聚物（ABS）存在的问题，讨论了3D打印用ABS材料的成分配方、制备工艺、打印工艺、性能与用途，并指出加大对ABS材料的研究力度，使其能够应用于3D打印的同时，不断提升其打印制品的力学性能，赋予其多种特殊性能，以扩宽3D打印ABS材料的应用范围，是重要的研究方向之一。

关键词: 三维打印, 丙烯腈-丁二烯-苯乙烯共聚物, 研究进展

Abstract: This paper briefly introduced the 3D printing and fused deposition molding technologies and also mentioned the problems in the acrylonitrile-butadiene-styrene copolymer (ABS)materials used for 3D printing. Furthermore, the ingredients, preparation technology, 3D printing processing, performance and applications of ABS materials used for the 3D printing were discussed. It is important for researchers to make effort to improve the mechanical performance of 3D printed products with the ABS materials as well as to endow them with more special properties so as to extend the application range of ABS materials for 3D printing.

Key words: three-dimensionalprinting, acrylonitrile-butadiene styrene copolymer, research progress

中图分类号:

叶旋, 涂华锦. 3D打印用ABS研究进展[J]. 中国塑料, 2019, 33(12): 101-108.

YE Xuan, TU Huajin. Research Progress in ABS Materials for 3D Printing[J]. China Plastics, 2019, 33(12): 101-108.

参考文献

[1] The third industrial revolution. The Economist, 2012-4-21.
[2] McMenamin P G, Quayle M R, McHenry C R, et al. The production of anatomical teaching resources using three-dimensional(3D) printing technology[J]. Anatomical Sci Education, 2014, 7(6): 479.
[3] Goyanes A, Wang J, Buanz A, et al. 3D printing of medicines: engineering novel oral devices with unique design and drug release characteristics[J]. Molecular Pharmaceutics, 2015, 12(11): 4077.
[4] Gunther D, Heymel B, Gunther J F, et al. Continuous 3D-printing for additive manufacturing[J]. Rapid Prototyping J, 2014, 20(4): 320.
[5] Paulsen S J, Miller J S. Tissue vascularization through 3D printing: Will technology bring us flow?[J]. Developmental Dynamics, 2015, 244(5): 629.
[6] 陈硕平, 易和平, 罗志虹等. 高分子3D打印材料和打印工艺[J]. 材料导报, 2016, 30(4): 54.
[7] 王延庆, 沈竞兴, 吴海全. 3D打印材料应用和研究现状[J]. 航空材料学报, 2016, 36(4): 89.
[8] 张胜, 徐艳松, 孙姗姗等. 3D打印材料的研究及发展现状[J]. 中国塑料, 2016, 30(1): 7.
[9] 陈彩珠, 潘汉军. 3D打印高分子材料研究进展[J]. 工程塑料应用, 2016, 44(9): 137.
[10] 尹远, 汪艳. 3D打印PC/ABS合金的性能[J]. 工程塑料应用, 2018, 46(8): 34.
[11] 方禄辉, 孙东成, 曹艳霞等. SBS对3D打印ABS性能的影响[J]. 工程塑料应用, 2015, 43(9): 54.
[12] 方禄辉, 孙东成, 曹艳霞等. 不同苯乙烯类嵌段共聚物对3D打印用ABS性能影响[J]. 塑料工业, 2015, 43(10): 75.
[13] 乔雯钰, 徐欢, 马超等. 3D打印用ABS丝材性能研究[J]. 工程塑料应用, 2016, 44(3): 18.
[14] 仲伟虹, 李凡, 张佐光等. 适于快速成型制造工艺的短纤维增强复合材料研究[J]. 复合材料学报, 2000, 17(4): 43.
[15] 肖建华. 3D打印用碳纤维增强热塑性树脂的挤出成型[J]. 塑料工业, 2016, 44(6): 46.
[16] Lonnie J Love, Vlastamil Kunc, Orlando Rios, et al. The importance of carbon fiber to polymer additive manufacturing[J]. J. Mater. Res. 2014, 29(17): 1893.
[17] 诸金, 王金刀, 张坚等. 基于FDM的3D打印SCF/ABS复合材料的结构与性能[J]. 塑料, 2018, 47(2): 46.
[18] Chuncheng Yang, Xiaoyong Tian, Tengfei Liu, et al. 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance[J]. 2017, 23(1): 209.
[19] 诸葛祥群, 岑发源, 成天耀等. MWNTs/ABS导电3D打印复合丝材的制备与性能[J]. 2017, 46(2): 62.
[20] 李前进, 诸葛祥群, 赵俊等. 石墨/丙烯腈-丁二烯-苯乙烯共聚物导电3D打印复合丝材的制备与性能研究[J]. 化工新型材料, 2018, 46(11): 72.
[21] Dul S, Fambri L, Pegoretti, A. Fused deposition modeling with ABS-graphene nanocomposites[J]. Composites Part A: Applied Science and Manufacturing, 2016, (85): 181.
[22] 唐慧. 高效光催化剂的制备及其对3D打印塑料丝材的性能影响研究[D]. 福建: 福建师范大学, 2016.
[23] Angel R. Torrado Perez, David A. Roberson, Ryan B. Wicker. Wicker. Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials[J]. J Fail. Journal of Failure Analysis and Prevention, 2014, 14(3): 343.
[24] Matthew R Skorski, Jake M Esenther, Zeeshan Ahmed, et al. The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites[J]. Science and Technology of Advanced Materials, 2016, 17(1): 89.
[25] Angel R, Torrado Corey M, Shemelya Joel D. Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing[J]. Additive Manufacturing, 2015, 6:16.
[26] Rocha C R, Torrado Perez A R, Roberson D A, et al. Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing[J]. Journal of Materials Research, 2014, 29(17):1859.
[27] 郑晗. 基于聚氨酯的多重形状记忆聚合物的制备与挤出研究[D]. 哈尔滨: 哈尔滨工业大学, 2016.
[28] Wang Y, Castles F, Grant P S. 3D Printing of NiZn ferrite/ABS Magnetic Composites for Electromagnetic Devices[J]. MRS Proceedings, 2015, 1788:29.
[29] Jaya Christiyan K G, Chandrasekhar U, Venkateswarlu K. A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite[J]. IOP Conference Series Materials Science and Engineering, 2016, 114: 012109.
[30] Weng Z, Wang J, Senthil T, et al. Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing[J]. Materials & Design, 2016, 102:276.
[31] Castles F, Isakov D, Lui A, et al. Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites[J]. Scientific Reports, 2016, 6:22714.
[32] Chao-Chung Kuo, Lung-Chang Liu, Wei-Feng Teng, et al. Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications[J]. Composites Part B Engineering, 2016, 86:36.
[33] Hwang S, Reyes E I, Moon K S, et al. Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process[J]. Journal of Electronic Materials, 2015, 44(3):771.
[34] Stansbury J W, Idacavage M J. 3D printing with polymers: Challenges among expanding options and opportunities[J]. Dental Materials, 2015, 32(1); 54.
[35] Melnikova R, Ehrmann A, Finsterbusch K. 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials[J]. IOP Conference Series Materials Science and Engineering, 2014, 62(1): 012018.
[36] 乔女. 基于APDL的ABS材料FDM-3D打印温度场有限元分析[J]. 航空精密制造技术, 2017, 53(2): 41.
[37] 乔女. ABS塑料3D打印过程中热应力耦合场分析与优化[J]. 塑料, 2017, 46(05): 24.
[38] Dawoud M, Taha I, Ebeid S J. Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques[J]. Journal of Manufacturing Processes, 2016, 21:39.
[39] P J Nu?eza, A Rivasa, E García-Plaza, et al. Dimensional and surface texture characterization in Fused Deposition Modelling (FDM) with ABS plus[J]. Procedia Engineering, 2015, 132: 856.
[40] Cantrell J T, Rohde S, Damiani D, et al. Experimental characterization of the mechanical properties of 3D-Printed ABS and polycarbonate parts[J]. Rapid Prototyping Journal, 2016, 23(4): 89.
[41] Cole D P, Riddick J C, Iftekhar Jaim H M, et al. Interfacial mechanical behavior of 3D printed ABS[J]. Journal of Applied Polymer Science, 2016, 133(30): 43671.
[42] Rankouhi B, Javadpour S, Delfanian F, et al. Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation[J]. Journal of Failure Analysis and Prevention, 2016, 16(3): 467.
[43] Tymrak B M, Kreiger M, Pearce J M. Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions[J]. Materials & Design, 2014, 58: 242.
[44] Kantaros A, Karalekas D. Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process[J]. Materials & Design, 2013, 50: 44.
[45] Liseli Baich, Guha Manogharan, Hazel Marie. Study of infill print design on production cost-time of 3D printed ABS parts[J]. Int. J. Rapid Manufacturing, 2015, 5: 308.
[46] Wenzheng W, Peng G, Guiwei L, et al. Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS[J]. Materials, 2015, 8(9): 5834.
[47] Mccullough E J, Yadavalli V K. Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices[J]. Journal of Materials Processing Technology, 2013, 213(6): 947.
[48] 龚运息, 蓝绍东. 空调开关座样件的3D打印及性能测试分析[J]. 现代制造工程, 2018, 451(04):48.
[49] Derek R, Eric C, Thomas S, et al. 3D-Printed ABS and PLA Scaffolds for Cartilage and, Nucleus Pulposus Tissue Regeneration[J]. International Journal of Molecular Sciences, 2015, 16(12): 15118.
[50] Harris B D, Nilsson S, Poole C M. A feasibility study for using ABS plastic and a low-cost 3D printer for patient-specific brachytherapy mould design[J]. Australasian Physical & Engineering Sciences in Medicine, 2015, 38(3): 399.
[51] Satyanarayana B, Prakash K J. Component Replication Using 3D Printing Technology[J]. Procedia Materials Science, 2015, 10: 263.
[52] Mirzaee M, Noghanian S, Wiest L, et al. Developing flexible 3D printed antenna using conductive ABS materials[C]. IEEE International Symposium on Antennas & Propagation & Usnc/ursi National Radio Science Meeting. IEEE, 2015.
[53] Ahn S H, Lee K T, Kim H J, et al. Smart soft composite: An integrated 3D soft morphing structure using bend-twist coupling of anisotropic materials[J]. International Journal of Precision Engineering & Manufacturing, 2012, 13(4): 631.

3D打印用ABS研究进展

Research Progress in ABS Materials for 3D Printing

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	冯凯, 李永青, 马秀清, 韩颖. 聚甲醛增韧改性的研究进展及应用[J]. 中国塑料, 2022, 36(7): 157-164.
[2]	孙旗, 高兴, 崔雪梅, 连慧琴, 崔秀国, 汪晓东. 黑磷烯纳米阻燃剂研究进展[J]. 中国塑料, 2022, 36(5): 133-139.
[3]	陈文静, 杨小龙, 韩顺涛, 韩颖, 马秀清. 聚丙烯腈材料改性方法及研究进展[J]. 中国塑料, 2022, 36(4): 158-165.
[4]	杨钦杰, 李佳汶, 李明, 陈刚, 李光照, 彭必友, 韩锐. 熔融沉积3D打印设备研究进展[J]. 中国塑料, 2022, 36(2): 157-171.
[5]	汤维, 钱立军, 邱勇, 陈雅君, 许博, 赵震. 聚丙烯材料无卤阻燃改性研究进展[J]. 中国塑料, 2021, 35(1): 136-149.
[6]	刘少刚王李波王晓龙曹新鑫周爱国. 高导热网络聚合物基复合材料的研究进展[J]. 中国塑料, 2019, 33(8): 127-135.
[7]	郝树杰贾普友周永红张猛. 本征型自修复聚氨酯材料的研究进展[J]. 中国塑料, 2019, 33(5): 121-129.
[8]	谭逸伦陈迎新李俊祥. 聚乙烯微孔塑料研究进展[J]. 中国塑料, 2019, 33(1): 124-132.
[9]	陈轲薛平孙华贾明印. 树脂基复合材料拉挤成型研究进展[J]. 中国塑料, 2019, 33(1): 116-123.
[10]	蔡国辉何小芳白玉峰曹新鑫. 医用聚氯乙烯耐辐照改性研究进展[J]. 中国塑料, 2018, 32(08): 14-18.
[11]	邓亚峰崔若昕汪梓玉禚安琪. 聚合物/生物质复合材料的研究进展[J]. 中国塑料, 2018, 32(07): 10-20.
[12]	龚莹周文英徐丽寇雨佳蔡会武赵伟闫智伟. 交联聚合物本征导热性能研究进展[J]. 中国塑料, 2018, 32(05): 1-7.
[13]	陈明高山俊沈春晖. 聚丙烯微发泡材料改性研究进展[J]. 中国塑料, 2018, 32(05): 8-14.
[14]	张焱董浩宇刘杲珺孟宪伟白耀宗宋尚军. 动力锂离子电池复合隔膜研究进展[J]. 中国塑料, 2018, 32(05): 15-27.
[15]	陈修敏李又兵陈静刘小祥吕文晏杨朝龙. 无机纳米粒子改性不饱和聚酯树脂研究进展[J]. 中国塑料, 2018, 32(03): 1-5.