1 |
林洁龙,杨 波,丁正亚,等. 免喷涂外观美学树脂的应用[J]. 工程塑料应用, 2016, 44(10): 36‑40.
|
|
LIN J L, YANG B, DING Z Y, et al.Applied of Paint‑Free Resin with Aesthetics Exterior[J]. Engineering Plastics Application, 2016, 44(10): 36‑40.
|
2 |
梁耀文,张 军,胡新国. 免喷涂材料浅析及在冰箱的应用研究[C]//2017年中国家用电器技术大会论文集. 合肥: 中国轻工业出版社, 2017. 109‑117.
|
3 |
周启花,张 扬,雷明辉. 免喷涂材料及其应用概述[J]. 广东化工, 2019, 46(16): 94‑96.
|
|
ZHOU Q H, ZHANG Y, LEI M H. Overview of Spray‑Free Materials and Their Appications[J]. Guangdong Chemical, 2019, 46(16): 94‑96.
|
4 |
RUSSELL L. Today's Aluminum Pigments[J].JCT Coa⁃tings Tech, 2004(7): 48‑50.
|
5 |
SUNG L P, NADAL M E, MCKNIGHT M E, et al.Optical Reflectance of Metallic Coatings: Effect of Aluminum Flake Orientation[J]. Journal of Coatings Technology, 2002, 74(932): 55‑63.
|
6 |
袁海兵,郝源增,陈 瑜,等. 铝颜料对免喷涂塑料熔接痕影响的研究[C]//2014年中国家用电器技术大会论文集.宁波: 中国轻工业出版社, 2014. 793‑796.
|
7 |
袁海兵. 铝颜料在免喷涂聚丙烯复合材料中的应用研究[J]. 广东化工, 2013, 40(10): 38‑39.
|
|
YUAN H B. Applied Research of Aluminum Pigment in the Spray‑Free Polypropylene Composites[J].Guangdong Chemical, 2013, 40(10): 38‑39.
|
8 |
黄 丽. 高分子材料[M]. 北京: 化学工业出版社, 2009.39‑111.
|
9 |
吴 园,董建廷,蔡训儒,等. 类喷涂零部件设计要点概述[J]. 家电科技, 2017(7): 78‑81.
|
|
WU Y, DONG J T, CAI X R, et al. Avoid Spraying Parts Design Overview[J]. Home Appliance Technology, 2017(7): 78‑81.
|
10 |
杜岩岩,刘春亮,陈宜川,等. 绿色材料在家电产品中的应用[J]. 塑料工业, 2016, 44(6): 1‑4.
|
|
DU Y Y, LIU C L, CHEN Y C, et al. Application of Green Materials in Home Appliance[J]. China Plastics Industry, 2016, 44(6): 1‑4.
|
11 |
陈 兴,杨 港. 免喷涂材料在汽车行业上的应用与研究[J]. 南方农机, 2019(6): 160.
|
|
CHEN X, YANG G.Application and Research of Non‑spraying Materials in Automobile Industry[J]. Southern Agricultural Machinery, 2019(6): 160.
|
12 |
保 罗 D R,巴克纳尔 C B. 聚合物共混物: 组成与性能[M]. (殷敬华,韩艳春,安立佳等,译.) 北京: 科学出版社,2004, 658‑680.
|
13 |
SANTOS I, PONTES A J, MARTINS C I. Optimization of Injection Molding Process of Polypropylene with Aluminum Metallic Pigments[C]//PMI 2014‑International Conference on Polymersand Moulds Innovations. Conneticut: Society of Plastics Engineers, 2014.151‑156.
|
14 |
MARTINS C I, SANTOS I, PONTES A J. On the Effect of Metallic Particles on the Performance of Injection Moulded PP Plastic Parts[C]//5th Conference on Polymer and Mold Innovations. Conneticut: Society of Plastics Engineers, 2012. 375‑382.
|
15 |
莫荣强,雷春堂. 家电壳体用高分子材料及其应用技术的发展趋势[J]. 塑料工业, 2019, 47(2): 6‑10.
|
|
MO R Q, LEI C T. Development Trend of PolymerMaterials and Application for Household Appliances Shell[J]. China Plastics Industry, 2019, 47(2): 6‑10.
|
16 |
MALGUARNERA S C, MANISALI A I, RIGGS D C. Weld Line Structures and Properties in Injection Molded Polypropylene[J]. Polymer Engineering and Science, 1981, 21(17): 1 149‑1 155.
|
17 |
CHEN S C, LI H M, SU P L, et al. Investigation of the Weldline Strength of Injection Molded Nylon 6 Nanocomposite[J]. Journal of Reinforced Plastics and Composites, 2009, 28(18): 2 197‑2 210.
|
18 |
CHUNG D H, KWON T H. Numerical Studies of Fiber Suspensions in an Axisymmetric Radial Diverging Flow: The Effects of Modeling and Numerical Assumptions[J]. Journal of Non‑Newtonian Fluid Mechanics, 2002, 107(1‑3): 67‑96.
|
19 |
PARK J M, KWON T H. Nonisothermal Transient Fil⁃ling Simulation of Fiber Suspended Viscoelastic Liquid in a Center‑Gated Disk[J]. Polymer Composites, 2011, 32(3): 427‑437.
|
20 |
FOLGAR F, TUCKER C L. Orientation Behavior of Fibers in Concentrated Suspensions[J]. Journal of Reinforced Plastics and Composites, 1984, 3(2):98‑119.
|
21 |
WANG J, O’GARA J F, TUCKER C L. An Objective Model for Slow Orientation Kinetics in Concentrated Fiber Suspensions: Theory and Rheological Evidence[J]. Journal of Rheology, 2008, 52(5): 1 179‑1 200.
|
22 |
BAY R S, TUCKER C L. Fiber Orientation in Simple Injection Moldings. Part I: Theory and Numerical Methods[J]. Polymer Composites, 1992, 13(4): 317‑331.
|
23 |
ADVANI S G. The Use Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites[J]. Journal of Rheology, 1987, 31(8): 751‑784.
|
24 |
BAY R S, TUCKER C L. Fiber Orientation in Simple Injection Moldings. Part II: Experimental Results[J]. Polymer Composites, 1992, 13(4): 332‑341.
|
25 |
PHELPS J H, TUCKER C L. An Anisotropic Rotary Diffusion Model for Fiber Orientation in Short‑andLong‑Fiber Thermoplastics[J]. Journal of Non‑Newtonian Fluid Mechanics, 2009, 156(3): 165‑176.
|
26 |
GUPTA M, WANG K K. Fiber Orientation and Mechanical Properties of Short‑Fiber‑Reinforced Injection‑Molded Composites:Simulated and Experimental Results[J]. Polymer Composites, 1993, 14(5): 367‑382.
|
27 |
PARK J M, JEONG S J, PARK S J. Flake Orientation in Injection Molding of Pigmented Thermoplastics[J]. Journal of Manufacturing Science and Engineering Transactions of the Asme, 2012, 134(1): 014501‑1‑014501-4.
|
28 |
PARK S H, LYU M Y. Observation of Two‑Dimensional Shaped Aluminum Flake Orientation During Injection Molding and Its Orientation Mechanism[J].Macromolecular Research, 2019, 27(5): 481‑489.
|
29 |
董建廷,叶 倩,逯 琪. 多面体金属效果颜料的制备与应用[J]. 中国塑料, 2018, 32(8): 58‑64.
|
|
DONG J T, YE Q, LU Q. Preparation and Applications of Polyhedral Pigments with Metallic Effect[J]. China Plastics, 2018, 32(8): 58‑64.
|
30 |
LIU H, YE H Q, TANG X D. Aluminum Pigment Encapsulated by in Situ Copolymerization of Styrene and Maleic Acid[J]. Applied Surface Science, 2007, 254(2): 616‑620.
|
31 |
KARLSSON P M, ESBJORNSSON N B, HOLMBERG K. Admicellar Polymerization of Methyl Methacrylate on Aluminum Pigments[J]. Journal of Colloid and Interface Science, 2009, 337(2): 364‑368.
|
32 |
MULLER B, PAULUS A, LETTMANN B, et al. Amphiphilic Maleic Acid Copolymers as Corrosion Inhibitors for Aluminum Pigment[J]. Journal of Applied Polymer Science, 1998, 69(11): 2 169‑2 174.
|
33 |
陆伟明. 急冷急热成型技术在花洒高光面板模具上的应用[J]. 模具工业, 2010, 36(10): 59‑62.
|
|
LU W M. Application of Emergency Cooling and Heating Technique in Mould for High Surface Fineness of Shower Spray[J]. Die Industry, 2010, 36(10): 59‑62.
|
34 |
RAWSON K W, ALLAN P S, BEVIS M J. Controlled Orientation of Reflective Pigment and Optical Property Characterization of Injection‑Molded Polypropylene[J]. Polymer Engineering and Science, 2010, 39(1): 177‑189.
|
35 |
王茂玲,张荣语,许嘉翔. 模流分析理论与实务[M]. 初版. 新竹: 科盛科技股份有限公司, 2018. 59‑61.
|
36 |
刘 芬,周华民,李德群. 注射成形残余应力与翘曲变形的数值模拟[J]. 上海交通大学报, 2008, 42(1): 61‑66.
|
|
LIU F, ZHOU H M, LI D Q. The Numerical Simulation of Residual Stresses and Warpage in Injection Molding[J]. Journal of Shanghai Jiaotong University, 2008, 42(1): 61‑66.
|
37 |
PARK J M, JEONG S J, PARK S J. Numerical Prediction of Flake Orientation and Surface Color in Injection Molding of Flake‐Pigmented Thermoplastics[J]. Polymer Composites, 2011, 32(8): 1297‑1303.
|
38 |
KIM S L, CHOI T G, CHO H S, et al. Orientationof Two Dimensional Fillers and Surface Appearance in an Injection Molded Article[J]. Polymer‑Korea,2016,40(6): 871‑879.
|
39 |
朱海燕,肖小亭,张婧婧,等. ABS/铝粉共混物注塑件翘曲变形的模拟分析[J]. 工程塑料应用, 2010, 38(11): 35‑38.
|
|
ZHU H Y, XIAO X T, ZHANG J J, et al. Numerical Analysis on Warpage of ABS/Aluminium Blends in Injection Moulding[J]. Engineering Plastics Application, 2010, 38(11): 35‑38.
|
40 |
徐东东. 基于Moldflow的免喷涂塑料在电水壶外壳上的仿真研究[J]. 塑料工业, 2017, 45(12): 63‑66.
|
|
XU D D. Simulation Study of Free‑painting Plastic on Kettle Shell Base on Moldflow[J]. China Plastics
|
|
Industry, 2017, 45(12): 63‑66.
|
41 |
张舒宁,刘 洁,彭 莉,等. 免喷涂聚丙烯材料耐光老化的影响因素研究[J]. 中国塑料, 2017, 31(10): 105‑112.
|
|
ZHANG S N, LIU J, PENG L, et al. Research on Factors Influencing Photo‑aging of Polypropylene Materials[J]. China Plastics, 2017, 31(10): 105‑112.
|
42 |
刘 鑫,曾文波,张晓东,等. 免喷涂聚丙烯复合材料耐候性研究[J]. 合成材料老化与应用, 2017, 46(3): 15‑19.
|
|
LIU X, ZENG W B, ZAHNG X D, et al. The Aging Behavior of Spray‑free Polypropylene Composites[J]. Aging and Application of Synthetic Materials, 2017, 46(3): 15‑19.
|
43 |
胡 纲. 免喷涂ABS的性能研究[J]. 塑料工业, 2015, 43(9): 117‑120.
|
|
HU G. Study on Mechanical Properties of Free‑painting ABS[J]. China Plastics Industry, 2015, 43(9): 117‑120.
|
44 |
洪新密,肖小亭,廖 俊. 金属效应ABS/AL注射件的反射率、颜色与力学性能[J]. 塑料, 2017, 46(6): 42‑45.
|
|
HONG X M, XIAO X T, LIAO J. Reflectivity, Color and Mechanical Properties of Metallic Effect ABS/Al Plastic Parts[J]. Plastics, 2017, 46(6): 42‑45.
|