1 |
PARASHAR A, MERTINY P. Adhesively Bonded Composite Tubular Joints: Review [J]. International Journal of Adhesion and Adhesives, 2012, 38:58⁃68.
|
2 |
KANERVA M, SAARELA O. The Peel Ply Surface Treatment for Adhesive Bonding of Composites: A Review [J]. International Journal of Adhesion and Adhesives, 2013, 43:60⁃69.
|
3 |
SINMAZçELIK T, AVCU E, BORA M Ö, et al. A Review: Fibre Metal Laminates, Background, Bonding Types and Applied Test Methods [J]. Materials & Design, 2011, 32(7): 3 671⁃3 685.
|
4 |
NETO J A B P, CAMPILHO R D S G, SILVA L F MDA. Parametric Study of Adhesive Joints with Compo⁃sites [J]. International Journal of Adhesion and Adhesives, 2012, 37:96⁃101.
|
5 |
ANYFANTIS K N, TSOUVALIS N G. Loading and Fracture Response of CFRP⁃to⁃Steel Adhesively Bonded Joints with Thick Adherents⁃Part II: Numerical Simulation [J]. Composite Structures, 2013, 96:858⁃868.
|
6 |
OZEL A, YAZICI B, AKPINAR S, et al. A Study on The Strength of Adhesively Bonded Joints with Different Adherends [J]. Composites Part B: Engineering, 2014, 62:167⁃174.
|
7 |
GüLTEKIN K, AKPINAR S, ÖZEL A. The Effect of The Adherend Width on The Strength of Adhesively Bon⁃ded Single⁃Lap Joint: Experimental and Numerical Analysis [J]. Composites Part B: Engineering, 2014, 60:736⁃745.
|
8 |
JEN Y M, KO C W. Evaluation of Fatigue Life of Adhesively Bonded Aluminum Single⁃Lap Joints Using Interfacial Parameters [J]. International Journal of Fatigue, 2010, 32(2): 330⁃340.
|
9 |
ISLAM M S, TONG L. Effects of Hygrothermal and Ambient Humidity Conditioning on Shear Strength of Metal⁃GFRP Single Lap Joints Co⁃Cured in and out of Water [J]. International Journal of Adhesion and Adhesives, 2016, 68:305⁃316.
|
10 |
NANDA KISHORE A, SIVA PRASAD N. An Experimental Study of Flat⁃Joggle⁃Flat Bonded Joints in Composite Laminates [J]. International Journal of Adhesion and Adhesives, 2012, 35:55⁃58.
|
11 |
许昶,刘志明.CFRP平_折_平连接接头试验研究与数值模拟 [J] .北京航空航天大学学报,2019,45(17):2 207⁃2 216.
|
|
XU C,LIU Z M. Experimental Study and Numerical Simulation on CFRP Flat⁃Joggle⁃Flat Joints [J] . Journal of Beijing University of Aeronautics and Astronautics, 2019,45(11):2 207⁃2 216.
|
12 |
NOSOUHI F, FARAHANI M, ANSARI M. Experimental and Numerical Study on The Composite Adhesive Joint Reinforcement Using Wavy Edge [J]. Journal of Adhesion Science and Technology, 2017, 32(9): 1 007⁃1 017.
|
13 |
RAHMANI A, CHOUPANI N. Experimental and Numerical Analysis of Fracture Parameters of Adhsively Bonded Joints at Low Temperatures [J]. Engineering Fracture Mechanics, 2019, 207:222⁃236.
|
14 |
MU W, NA J, TAN W, et al. Durability of Adhesively Bonded CFRP⁃Aluminum Alloy Joints Subjected to Coupled Temperature and Alternating Load [J]. International Journal of Adhesion and Adhesives, 2020, 99.
|
15 |
刘子仙,陈晓峰,周鑫,等.一种增加碳纤维复合材料管件与接头之间连接强度的设计方法:中国,2017103562038[P]. 2017⁃10⁃20.
|
16 |
YOO J S, TRUONG V H, PARK M Y, et al. Parametric Study on Static and Fatigue Strength Recovery of Scarf⁃Patch⁃Repaired Composite Laminates [J]. Composite Structures, 2016, 140:417⁃432.
|
17 |
LOUSDAD A, MEGUENI A, BOUCHIKHI A S. Geometric Edge Shape Based Optimization for Interfacial Shear Stress Reduction in Fiber Reinforced Polymer Plate Retrofitted Concrete Beams [J]. Computational Materials Science, 2010, 47(4): 911⁃918.
|
18 |
杜宇,杨涛,牛雪娟.炭纤维层合板和铝合金板阶梯形胶接接头拉伸失效实验 [J] .固体火箭技术,2018,41(4):503⁃508.
|
|
DU Y,YANG T,NIU X J. Experimental Study on Tensile and Bending Properties of Scarf⁃Patch⁃Repaired Composite Laminates [J]. Journal of Solid Rocket Technology, 2018, 41(4):503⁃508.
|
19 |
BANEA M D, SILVA L F MDA. Adhesively Bonded Joints in Composite Materials: An Overview [J]. Proceedings of The Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2016, 223(1): 1⁃18.
|
20 |
IGNACIO R R, JUAN L L G V. Method For Simulating The Behavior of A Bonded Joint of Two Parts:US, 8229717B2[P]. 2012⁃07⁃24.
|
21 |
周祥,胡业发,黄向阳,等.碳纤维复合材料T型胶接接头损伤行为研究 [J].数字制造科学,2018,16(4):269⁃274.
|
|
ZHOU X,HU Y F,HUANG X Y,et al. Study on Damage Behaviour of CFRP T⁃joint[J].Digital Manufacture Science, 2018, 16(4):269⁃274.
|
22 |
LIU Y, LEMANSKI S, ZHANG X. Parametric Study of Size, Curvature and Free Edge Effects on The Predicted Strength of Bonded Composite Joints [J]. Composite Structures, 2018, 202:364⁃373.
|
23 |
QIU C, FENG P, YANG Y, et al. Joint Capacity of Bonded Sleeve Connections for Tubular Fibre Reinforced Polymer Members [J]. Composite Structures, 2017, 163:267⁃279.
|
24 |
王海鹏,刘梦媛,陈新文.复合材料管⁃铝接头胶接结构抗拉性能试验研究 [J].纤维复合材料,2013(3):27⁃29.
|
|
WANG H P, LIU M Y, CHEN X W. Experimental Study on Properties of Adhesive Bonded Components of Composites Pipe⁃Aluminum Joint [J].Fiber Composites, 2013(3):27⁃29.
|
25 |
LI J, YAN Y, ZHANG T, et al. Experimental Study of Adhesively Bonded CFRP Joints Subjected to Tensile Loads [J]. International Journal of Adhesion and Adhesives, 2015, 57:95⁃104.
|
26 |
MARK R G, RONY G G, VIRGINIA H F. Hybrid Metallic/Composite Joint with Enhanced Performance: US,0093422A1[P]. 2018⁃04⁃05.
|
27 |
YU Q Q, GAO R X, GU X L, et al. Bond Behavior of CFRP⁃Steel Double⁃Lap Joints Exposed to Marine Atmosphere and Fatigue Loading [J]. Engineering Structures, 2018, 175:76⁃85.
|
28 |
CAMPILHO R D S G, PINTO A M G, BANEA M D, et al. Strength Improvement of Adhesively⁃Bonded Joints Using A Reverse⁃Bent Geometry [J]. Journal of Adhesion Science and Technology, 2012, 25(18): 2 351⁃2 368.
|
29 |
XU W, LI G. Finite Difference Three⁃Dimensional Solution of Stresses in Adhesively Bonded Composite Tubular Joint Subjected to Torsion [J]. International Journal of Adhesion and Adhesives, 2010, 30(4): 191⁃199.
|
30 |
AIMMANEE S, HONGPIMOLMAS P. Stress Analysis of Adhesive⁃Bonded Tubular⁃Coupler Joints with Optimum Variable⁃Stiffness Composite Adherend Under Torsion [J]. Composite Structures, 2017, 164:76⁃89.
|
31 |
AIMMANEE S, HONGPIMOLMAS P, RUANGJIRA⁃KIT K. Simplified Analytical Model for Adhesive⁃Bonded Tubular Joints with Isotropic and Composite Adherends Subjected to Tension [J]. International Journal of Adhesion and Adhesives, 2018, 86:59⁃72.
|
32 |
KUMAR S, KHAN M A. An Elastic Solution for Adhesive Stresses in Multi⁃Material Cylindrical Joints [J]. International Journal of Adhesion and Adhesives, 2016, 64:142⁃152.
|
33 |
NA J, MU W, QIN G, et al. Effect of Temperature on The Mechanical Properties of Adhesively Bonded Basalt FRP⁃Aluminum Alloy Joints in The Automotive Industry [J]. International Journal of Adhesion and Adhesives, 2018, 85:138⁃148.
|
34 |
REIS P N B, SOARES J R L, PEREIRA A M, et al. Effect of Adherends and Environment on Static and Tran⁃sverse Impact Response of Adhesive Lap Joints [J]. Theoretical and Applied Fracture Mechanics, 2015, 80:79⁃86.
|
35 |
HAMOODI⁃TABAR M, REZA A. Long⁃Term Shear Stress Distribution in Adhesively Bonded Tubular Joints under Tensile Load Using The Time⁃Temperature Superposition Principle [J]. The Journal of Adhesion, 2019, 1⁃18.
|
36 |
FERNÁNDEZ⁃CAñADAS L M, IVAñEZ I, SANCHEZ⁃SAEZ S, et al. Effect of Adhesive Thickness and Overlap on The Behavior of Composite Single⁃Lap Joints [J]. Mechanics of Advanced Materials and Structures, 2019, 1⁃10.
|
37 |
KIM D, LEE D G, KIM J C, et al. Effect of Molecular Weight of Polyurethane Toughening Agent on Adhesive Strength and Rheological Characteristics of Automotive Structural Adhesives [J]. International Journal of Adhesion and Adhesives, 2017, 74:21⁃27.
|
38 |
DOMUN N, HADAVINIA H, ZHANG T, et al. Improving The Fracture Toughness and The Strength of Epoxy Using Nanomaterials—A Review of The Current Status [J]. Nanoscale, 2015, 7(23): 10 294⁃10 329.
|
39 |
PALUVAI N R, MOHANTY S, NAYAK S K. Synthesis and Modifications of Epoxy Resins and Their Compo⁃sites: A Review [J]. Polymer⁃Plastics Technology and Engineering, 2014, 53(16): 1 723⁃1 758.
|
40 |
YANG G, YANG T, YUAN W, et al. The Influence of Surface Treatment on The Tensile Properties of Carbon Fiber⁃Reinforced Epoxy Composites⁃Bonded Joints [J]. Composites Part B: Engineering, 2019, 160:446⁃456.
|
41 |
AKPINAR I A, GüLTEKIN K, AKPINAR S, et al. Experimental Analysis on The Single⁃Lap Joints Bonded by A Nanocomposite Adhesives Which Obtained by Adding Nanostructures [J]. Composites Part B: Engineering, 2017, 110:420⁃428.
|
42 |
RIBEIRO F M F, CAMPILHO R D S G, CARBAS R J C, et al. Strength and Damage Growth in Composite Bonded Joints with Defects [J]. Composites Part B: Engineering, 2016, 100:91⁃100.
|
43 |
SORRENTINO L, POLINI W, BELLINI C, et al. Surface Treatment of CFRP: Influence on Single Lap Joint Performances [J]. International Journal of Adhesion and Adhesives, 2018, 85:225⁃233.
|
44 |
LIAO L, HUANG C, SAWA T. Effect of Adhesive Thickness, Adhesive Type and Scarf Angle on The Mechanical Properties of Scarf Adhesive Joints [J]. International Journal of Solids and Structures, 2013, 50(25/26): 4 333⁃4 340.
|
45 |
XU W, WEI Y. Strength and Interface Failure Mechanism of Adhesive Joints [J]. International Journal of Adhesion and Adhesives, 2012, 34:80⁃92.
|
46 |
QUAN D, URDáNIZ J L, ROUGE C, et al. The Enhancement of Adhesively⁃Bonded Aerospace⁃Grade Composite Joints Using Steel Fibres [J]. Composite Structures, 2018, 198:11⁃18.
|
47 |
GIV A N, AYATOLLAHI M R, GHAFFARI S H, et al. Effect of Reinforcements at Different Scales on Mechanical Properties of Epoxy Adhesives and Adhesive Joints: a review [J]. Journal of Adhesion, 2018, 94(13): 1 082⁃1 121.
|
48 |
RAZAVI S M J, AYATOLLAHI M R, ESMAEILI E, et al. Mixed⁃Mode Fracture Response of Metallic Fiber⁃Reinforced Epoxy Adhesive [J]. European Journal of Mechanics ⁃ A/Solids, 2017, 65:349⁃359.
|
49 |
LADANI R B, WU S, KINLOCH A J, et al. Enhancing Fatigue Resistance and Damage Characterisation in Adhesively⁃Bonded Composite Joints by Carbon Nanofibres [J]. Composites Science and Technology, 2017, 149:116⁃126.
|
50 |
KIM C⁃H, J⁃HCHOI. Effects of Dispersion Methods and Surface Treatment of Carbon Nano⁃Tubes on Defect Detectability and Static Strengths of Adhesive Joints [J]. Composite Structures, 2017, 176:684⁃691.
|
51 |
ESMAEILI E, RAZAVI S M J, BAYAT M, et al. Flexural Behavior of Metallic Fiber⁃Reinforced Adhesively Bonded Single Lap Joints [J]. The Journal of Adhesion, 2017, 94(6): 453⁃472.
|
52 |
WANG B, BAI Y, HU X, et al. Enhanced Epoxy Adhesion between Steel Plates by Surface Treatment and CNT/Short⁃Fibre Reinforcement [J]. Composites Science and Technology, 2016, 127:149⁃157.
|
53 |
KHORAMISHAD H, KHAKZAD M. Toughening Epoxy Adhesives with Multi⁃Walled Carbon Nanotubes [J]. The Journal of Adhesion, 2016, 94(1): 15⁃29.
|
54 |
KORAYEM A H, LI C Y, ZHANG Q H, et al. Effect of Carbon Nanotube Modified Epoxy Adhesive on CFRP⁃to⁃Steel Interface [J]. Composites Part B: Engineering, 2015, 79:95⁃104.
|
55 |
GUDE M R, PROLONGO S G, GóMEZ⁃DEL RíO T, et al. Mode⁃I Adhesive Fracture Energy of Carbon Fibre Composite Joints with Nanoreinforced Epoxy Adhesives [J]. International Journal of Adhesion and Adhesives, 2011, 31(7): 695⁃703.
|
56 |
TAKEDA T, NARITA F. Fracture Behavior and Crack Sensing Capability of Bonded Carbon Fiber Composite Joints with Carbon Nanotube⁃Based Polymer Adhesive Layer under Mode I Loading [J]. Composites Science and Technology, 2017, 146:26⁃33.
|
57 |
HPARK J,HCHOI J,HKWEON J. Evaluating The Strengths of Thick Aluminum⁃to⁃Aluminum Joints with Different Adhesive Lengths and Thicknesses [J]. Composite Structures, 2010, 92(9): 2 226⁃2 235.
|
58 |
QIN Z, YANG K, WANG J, et al. The Effects of Geometrical Dimensions on The Failure of Composite⁃to⁃Composite Adhesively Bonded Joints [J]. The Journal of Adhesion, 2020, 1⁃28.
|
59 |
邹田春,秦家徐,李龙辉,等. 搭接长度对钛合金⁃芳纶纤维复合材料单搭接接头胶接性能的影响 [J]. 中国塑料,2020,34(1):17⁃21.
|
|
ZOU T C,QIN J X,LI L H,et al. Effect of Lap Length on Bonding Properties of Titanium Alloy/Aramid Fiber Composites Single Lap Joints [J]. China Plastics,2020,34(1):17⁃21.
|
60 |
杨本宁,郑艳萍,李成,等. 复合材料胶接单搭接连接强度与失效模式研究 [J]. 玻璃钢/复合材料,2019(2):26⁃32.
|
|
YANG B N,ZHENG Y P,LI C,et al. Study on Strength and Failure Mode of Ahesively Bonded Single Lap Joints of Composite Material [J]. Fiber Reinforced Plastics/Composites,2019(2): 26⁃32.
|
61 |
郭霞,关志东,刘遂,等. 搭接长度对复合材料单搭接胶接接头的影响 [J]. 科技导报,2013(7):37⁃41.
|
|
GUO X,GUAN Z D,LIU S,et al. Effect of Lap Length on the Adhesive⁃bonded Single⁃lap Composite Joints [J]. Science & Technology Review,2013(7):37⁃41.
|
62 |
ARENAS J M, NARBóN J J, ALíA C. Optimum Adhesive Thickness in Structural Adhesives Joints Using Statistical Techniques Based on Weibull Distribution [J]. International Journal of Adhesion and Adhesives, 2010, 30(3): 160⁃165.
|
63 |
KUMAR S, TAMPI S. Modeling of Single⁃Lap Composite Adhesive Joints under Mechanical and Thermal Loads [J]. Journal of Adhesion Science and Technology, 2015, 30(7): 759⁃783.
|
64 |
JI G, OUYANG Z, LI G, et al. Effects of Adhesive Thickness on Global and Local Mode⁃I Interfacial Fracture of Bonded Joints [J]. International Journal of Solids and Structures, 2010, 47(18/19): 2 445⁃2 458.
|
65 |
BOUTAR Y, NAïMI S, MEZLINI S, et al. Effect of Adhesive Thickness and Surface Roughness on The Shear Strength of Aluminium One⁃Component Polyurethane Adhesive Single⁃Lap Joints for Automotive Applications [J]. Journal of Adhesion Science and Technology, 2016, 30(17): 1 913⁃1 929.
|
66 |
MARZI S, BIEL A, STIGH U. On Experimental Methods to Investigate The Effect of Layer Thickness on The Fracture Behavior of Adhesively Bonded Joints [J]. International Journal of Adhesion and Adhesives, 2011, 31(8): 840⁃850.
|
67 |
BUDHE S, BANEA M D, DE BARROS S, et al. An Updated Review of Adhesively Bonded Joints in Compo⁃site Materials [J]. International Journal of Adhesion and Adhesives, 2017, 72:30⁃42.
|
68 |
ISLAM M S, TONG L, FALZON P J. Influence of Metal Surface Preparation on Its Surface Profile, Contact angle, Surface Energy and Adhesion with Glass Fibre Prepreg [J]. International Journal of Adhesion and Adhesives, 2014, 51:32⁃41.
|
69 |
ENCINAS N, OAKLEY B R, BELCHER M A, et al. Surface Modification of Aircraft Used Composites for Adhesive Bonding [J]. International Journal of Adhesion and Adhesives, 2014, 50:157⁃63.
|
70 |
IQBAL H M S, BHOWMIK S, BENEDICTUS R. Surface Modification of High Performance Polymers by Atmospheric Pressure Plasma and Failure Mechanism of Adhesive Bonded Joints [J]. International Journal of Adhesion and Adhesives, 2010, 30(6): 418⁃424.
|
71 |
SILVA L F MDA, CARBAS R J C, CRITCHLOW G W, et al. Effect of Material, Geometry, Surface Treatment and Environment on The Shear Strength of Single Lap Joints [J]. International Journal of Adhesion and Adhesives, 2009, 29(6): 621⁃632.
|
72 |
XIE Y, YANG B, LU L, et al. Shear Strength of Bonded Joints of Carbon Fiber Reinforced Plastic (CFRP) Laminates Enhanced by A Two⁃Step Laser Surface Treatment [J]. Composite Structures, 2020, 232.
|
73 |
RAMíREZ F M G, MOURA M F S F, MOREIRA R D F, et al. A Review on The Environmental Degradation Effects on Fatigue Behaviour of Adhesively Bonded Joints [J]. Fatigue & Fracture of Engineering Materials & Structures, 2020, 43(7): 1 307⁃1 326.
|
74 |
S⁃MPARK, ROY R, J⁃HKWEON, et al. Strength and Failure Modes of Surface Treated CFRP Secondary Bonded Single⁃Lap Joints in Static and Fatigue Tensile Loading Regimes [J]. Composites Part A: Applied Science and Manufacturing, 2020, 134.
|
75 |
SHANG X, MARQUES E A S, MACHADO J J M, et al. Review on Techniques to Improve The Strength of Adhesive Joints with Composite Adherends [J]. Composites Part B: Engineering, 2019, 177.
|
76 |
LI Y, ZHAN X, GAO C, et al. Comparative Study of Infrared Laser Surface Treatment and Ultraviolet Laser Surface Treatment of CFRP Laminates [J]. The International Journal of Advanced Manufacturing Technology, 2019, 102(9⁃12): 4 059⁃4 071.
|
77 |
MOREIRA R D F, OLIVEIRA V, SILVA F G A, et al. Influence of Femtosecond Laser Treated Surfaces on The Mode I Fracture Toughness of Carbon⁃Epoxy Bon⁃ded Joints [J]. International Journal of Adhesion and Adh⁃esives, 2018, 82:108⁃113.
|
78 |
LEONE C, GENNA S. Effects of Surface Laser Treatment on Direct Co⁃Bonding Strength of CFRP Laminates [J]. Composite Structures, 2018, 194:240⁃251.
|
79 |
BUCHMANN C, LANGER S, FILSINGER J, et al. Analysis of The Removal of Peel Ply from CFRP Surfaces [J]. Composites Part B: Engineering, 2016, 89:352⁃361.
|
80 |
FISCHER F, KRELING S, JäSCHKE P, et al. Laser Surface Pre⁃Treatment of CFRP for Adhesive Bonding in Consideration of The Absorption Behaviour [J]. The Journal of Adhesion, 2012, 88(4⁃6): 350⁃363.
|
81 |
PALMIERI F L, BELCHER M A, WOHL C J, et al. Laser Ablation Surface Preparation for Adhesive Bonding of Carbon Fiber Reinforced Epoxy Composites [J]. International Journal of Adhesion and Adhesives, 2016, 68:95⁃101.
|
82 |
MOHAN J, RAMAMOORTHY A, IVANKOVIĆ A, et al. Effect of An Atmospheric Pressure Plasma Treatment on The Mode I Fracture Toughness of a Co⁃Cured Composite Joint [J]. The Journal of Adhesion, 2014, 90(9): 733⁃754.
|
83 |
BORSELLINO C, DI BELLA G, RUISI V F. Adhesive Joining of Aluminium AA6082: The Effects of Resin and Surface Treatment [J]. International Journal of Adhesion and Adhesives, 2009, 29(1): 36⁃44.
|
84 |
LI S, SUN T, LIU C, et al. A Study of Laser Surface Treatment in Bonded Repair of Composite Aircraft Structures [J]. R Soc Open Sci, 2018, 5(3).
|
85 |
HU P, HAN X, LI W D, et al. Research on The Static Strength Performance of Adhesive Single Lap Joints Subjected to Extreme Temperature Environment for Automotive Industry [J]. International Journal of Adhesion and Adhesives, 2013, 41:119⁃126.
|
86 |
BANEA M D, SILVA L F M D, CAMPILHO R D S G. Effect of Temperature on Tensile Strength and Mode I Fracture Toughness of A High Temperature Epoxy Adhesive [J]. Journal of Adhesion Science and Technology, 2012, 26(7): 939⁃953.
|
87 |
BANEA M D, DE SOUSA F S M, SILVA L F MDA, et al. Effects of Temperature and Loading Rate on the Mechanical Properties of A High Temperature Epoxy Adhesive [J]. Journal of Adhesion Science and Technology, 2012, 25(18): 2 461⁃2 474.
|
88 |
BANEA M D, SILVA L F MDA. Mechanical Characte⁃rization of Flexible Adhesives [J]. Journal of Adhesion, 2009, 85(4⁃5): 261⁃285.
|
89 |
REIS J M L, ANDRADE B, WATANABE M M, et al. Influence of Temperature on The Bending Stiffness and Tensile⁃Shear Strength of Composite–Metal Joints [J]. The Journal of Adhesion, 2018, 94(14): 1 122⁃1 136.
|
90 |
GRANT L D R, ADAMS R D, SILVA L F MDA. Effect of The Temperature on The Strength of Adhesively Bonded Single Lap and T Joints for The Automotive Industry [J]. International Journal of Adhesion and Adhesives, 2009, 29(5): 535⁃542.
|
91 |
URKMEZ TASKIN N, SAHIN A. Effect of Aging Time at High Temperature on The Shear Strength of Adhesively Bonded Aluminum Composite Foam Joints [J]. The Journal of Adhesion, 2018, 95(4): 308⁃324.
|
92 |
FERNANDES R L, DE MOURA M F S F, MOREIRA R D F. Effect of Temperature on Pure Modes I and II Fracture Behavior of Composite Bonded Joints [J]. Composites Part B: Engineering, 2016, 96:35⁃44.
|
93 |
CHARALAMBOUS G, ALLEGRI G, HALLETT S R. Temperature Effects on Mixed Mode I/II Delamination under Quasi⁃static and Fatigue Loading of A Carbon/Epoxy Composite [J]. Composites Part A: Applied Science and Manufacturing, 2015, 77:75⁃86.
|
94 |
CORONADO P, ARGüELLES A, VIñA J, et al. Influence of Temperature on A Carbon–Fibre Epoxy Compo⁃site Subjected to Static and Fatigue Loading under Mode⁃I Delamination [J]. International Journal of Solids and Structures, 2012, 49(21): 2 934⁃2 940.
|
95 |
BANEA M D, SILVA L F MDA, CAMPILHO R D S G. Mode II Fracture Toughness of Adhesively Bonded Joints as A Function of Temperature: Experimental and Numerical Study [J]. The Journal of Adhesion, 2012, 88(4⁃6): 534⁃551.
|
96 |
BANEA M D, SILVA L F MDA, CAMPILHO R D S G. Mode I Fracture Toughness of Adhesively Bonded Joints as A Function of Temperature: Experimental and Numerical study [J]. International Journal of Adhesion and Adhesives, 2011, 31(5): 273⁃279.
|
97 |
BANEA M D, SILVA L F MDA, CAMPILHO R D S G. Temperature Dependence of The Fracture Toughness of Adhesively Bonded Joints [J]. Journal of Adhesion Science and Technology, 2010, 24(11/12): 2 011⁃2 026.
|
98 |
NACHTANE M, TARFAOUI M, SASSI S, et al. An Investigation of Hygrothermal Aging Effects on High Strain Rate Behaviour of Adhesively Bonded Composite Joints [J]. Composites Part B: Engineering, 2019, 172:111⁃120.
|
99 |
VIANA G, COSTA M, BANEA M D, et al. Moisture and Temperature Degradation of Double Cantilever Beam Adhesive Joints [J]. Journal of Adhesion Science and Technology, 2017, 31(16): 1 824⁃1 838.
|
100 |
LIU S, CHENG X, ZHANG Q, et al. An Investigation of Hygrothermal Effects on Adhesive Materials and Double Lap Shear Joints of CFRP Composite Laminates [J]. Composites Part B: Engineering, 2016, 91:431⁃440.
|
101 |
STAZI F, GIAMPAOLI M, ROSSI M, et al. Environmental Ageing on GFRP Pultruded Joints: Comparison between Different Adhesives [J]. Composite Structures, 2015, 133:404⁃414.
|
102 |
ZHANG Y, ADAMS R D, SILVA L F M D. Absorption and Glass Transition Temperature of Adhesives Exposed to Water and Toluene [J]. International Journal of Adhesion and Adhesives, 2014, 50:85⁃92.
|
103 |
MOHAN J, IVANKOVIĆ A, MURPHY N. Mode I Fracture Toughness of Co⁃Cured and Secondary Bonded Composite Joints [J]. International Journal of Adhesion and Adhesives, 2014, 51:13⁃22.
|
104 |
CHAVES F J P, DE MOURA M F S F, SILVA L F MDA, et al. Fracture Characterization of Bonded Joints Using The Dual Actuator Load Apparatus [J]. Journal of Adhesion Science and Technology, 2013, 28(5): 512⁃524.
|
105 |
SUGITA Y, WINKELMANN C, SAPONARA VLA. Environmental and Chemical Degradation of Carbon/Epoxy Lap Joints for Aerospace Applications, and Effects on Their Mechanical Performance [J]. Compo⁃sites Science and Technology, 2010, 70(5): 829⁃839.
|
106 |
MOHAN J, IVANKOVIĆ A, MURPHY N. Effect of Prepreg Storage Humidity on The Mixed⁃Mode Fracture Toughness of A Co⁃Cured Composite Joint [J]. Composites Part A: Applied Science and Manufacturing, 2013, 45:23⁃34.
|
107 |
FERNANDES R L, DE MOURA M F S F, MOREIRA R D F. Effect of Moisture on Pure Mode I and II Fracture Behaviour of Composite Bonded Joints [J]. International Journal of Adhesion and Adhesives, 2016, 68:30⁃38.
|
108 |
ALESSI S, PITARRESI G, SPADARO G. Effect of Hydrothermal Ageing on The Thermal and Delamination Fracture Behaviour of CFRP Composites [J]. Composites Part B: Engineering, 2014, 67:145⁃153.
|
109 |
KATSIROPOULOS C V, CHAMOS A N, TSERPES K I, et al. Fracture Toughness and Shear Behavior of Composite Bonded Joints Based on A Novel Aerospace Adhesive [J]. Composites Part B: Engineering, 2012, 43(2): 240⁃248.
|
110 |
S⁃JBAEK, KIM M⁃S, AN W⁃J, et al. Defect Detection of Composite Adhesive Joints Using Electrical Resistance Method [J]. Composite Structures, 2019, 220:179⁃184.
|
111 |
邱平. 碳纤维增强复合材料含缺陷胶接接头的强度与失效分析[D].杭州:浙江大学,2018.
|
112 |
杨银环,周振功,郭颖,等. 缺陷对单搭胶接接头力学性能的影响[J].复合材料学报,2012,29(5):157⁃163.
|
|
YANG Y H,ZHOU Z G,GUO Y, et al.Effect of Defects in The Adhesive Layer On Strength of Adhesively Bonded Single⁃Lap Composites Joints[J].Acta Materiae Compositae Sincia,2012, 29(5):157⁃163.
|
113 |
吴海,肖加余,邢素丽,等. 含诱导缺陷复合材料T型接头的弯曲失效实验[J].国防科技大学学报,2015, 37(4):128⁃136.
|
|
WU H,XIAO J Y,XING S L,et al.The Failure Experiment of Composite T⁃Joints with Induced Defects under Bending Load[J].Journal of National University of Defense Technology, 2015, 37(4):128⁃136.
|
114 |
GUO X, GUAN Z⁃D, NIE H⁃C, et al. Damage Tolerance Analysis of Adhesively Bonded Composite Single Lap Joints Containing a Debond Flaw [J]. The Journal of Adhesion, 2016, 93(3): 216⁃234.
|