Research Progress of Nanotechnology for Flame  Retardancy of Polypropylene

doi:10.19491/j.issn.1001-9278.2008.03.002

China Plastics ›› 2008, Vol. 22 ›› Issue (03): 6-11 .DOI: 10.19491/j.issn.1001-9278.2008.03.002

Previous Articles Next Articles

Research Progress of Nanotechnology for Flame Retardancy of Polypropylene

GUO Yan-Bing，GUO Shao-hui，CHEN Jun，ZHENG De，HUANG Hgon-lin

1.Faculty of Chemical Science and Engineering, China University of Petroleum (Beijing)，Beijing 102249,China; 2. Guangdong Winner Functional Materials Co.，Ltd.，Foshan 528521, China

Received:2007-12-17 Revised:1900-01-01 Online:2008-03-26 Published:2008-03-26

Abstract

Abstract: the nano-scale inorganic flame-retardants are well in characteristics of high efficiency, multi-functionalities, reduced fuming and low filling of additives, which may well be used in retardant polymeric composite. Research work is reviewed about nano-scale inorganic flame-retardants used in polypropylene (PP)，including PP/nano-scale metal hydroxide composite, PP/carbon nano-tube(PP/CNT's)composite, PP/nano-montmorillonite(PP/MM)and PP/nano-polyhedral oligomeric silsesquioxane (PP/POSS) composites.

Key words: polypropylene, nano organic flame retardant, metal hydroxide, carbon nano-tube, montmo-rillonite

GUO Yan-Bing, GUO Shao-hui, CHEN Jun, ZHENG De, HUANG Hgon-lin. Research Progress of Nanotechnology for Flame Retardancy of Polypropylene[J]. China Plastics, 2008, 22(03): 6-11 .

[1]	ZHANG Lin, XIA Zhangchuan, HE Yadong, XIN Chunling, WANG Ruixue, REN Feng. Influence of gas flow of plasma jet carrier on modification effect for glass fiber [J]. China Plastics, 2022, 36(9): 7-15.
[2]	ZHANG Bing. Study on test of oxidation induction time for random copolymer polypropylene pipe [J]. China Plastics, 2022, 36(8): 107-109.
[3]	ZHAO Hongjing, ZHU Jiang. Study on numerical simulation of two⁃phase extrusion for micro/nano⁃laminated natural rubber/polypropylene [J]. China Plastics, 2022, 36(8): 110-114.
[4]	LIU Yi, WANG Ye, SUN Wei, QU Guoxing, XU Xia, YANG Shaolin, YUAN Ning. Determination of content of transparent nucleating agent in polypropylene using infrared spectroscopy [J]. China Plastics, 2022, 36(8): 115-118.
[5]	ZHANG Taozhong, CHEN Xiaolong, HAO Xiaoyu, YU Fujia. Comparison of mechanical properties and interfacial interactions of polypropylene composites filled with talc， calcium carbonate， and barium sulfate [J]. China Plastics, 2022, 36(8): 36-41.
[6]	WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu. Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism [J]. China Plastics, 2022, 36(7): 1-7.
[7]	YU Changyong, XIN Zhong. Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene [J]. China Plastics, 2022, 36(7): 121-128.
[8]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[9]	SUN Wei, LIU Yi, LIAO Yunlong, CHEN Junjia. Study on influence factors for determination of ethylene content in polypropylene powder [J]. China Plastics, 2022, 36(6): 54-59.
[10]	WANG Qingsong. Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC [J]. China Plastics, 2022, 36(4): 30-34.
[11]	WANG Fuyu, GUO Jinqiang, ZHANG Yuxia. In⁃situ fibrillation methods of polymer blends and their application in PP⁃based blends [J]. China Plastics, 2022, 36(3): 146-156.
[12]	LI Rui, JIANG Yanfeng, WU Shuang, AN Yanjie, JIANG Zeyu, ZHANG Mingqiang. Microstructure and thermal characterization of polypropylene special material for cast films through temperature rising elution fractionation [J]. China Plastics, 2022, 36(3): 53-57.
[13]	CAO Zhifeng, ZHAO Lipin, HE Ting, MA Baijun. Preparation and properties of five⁃layer co⁃extrusion barrier films [J]. China Plastics, 2022, 36(3): 64-68.
[14]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on process parameters for filling process of polypropylene microcellular injection molding under supercritical N₂ [J]. China Plastics, 2022, 36(3): 69-74.
[15]	SONG Renda, WU Gaojian, CHEN Junxiang, ZHANG Youchen, YANG Weimin, XIE Pengcheng. Preparation and its electromagnetic shielding performance of PP/PET/CNTs foaming composites [J]. China Plastics, 2022, 36(2): 1-7.

Research Progress of Nanotechnology for Flame Retardancy of Polypropylene

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments