Optimum Design of Runner System for LCD TV Underprops without Weld Lines

doi:10.19491/j.issn.1001-9278.2008.05.019

China Plastics ›› 2008, Vol. 22 ›› Issue (05): 87-90 .DOI: 10.19491/j.issn.1001-9278.2008.05.019

Optimum Design of Runner System for LCD TV Underprops without Weld Lines

XIAO Fang-cheng，OU Xiang-lin，hU Hai-tao，WU Shi-jian

College of Polymer Science and Engineering, Sichuan University, Chengdu 610065 ,China

Received:2008-03-09 Revised:1900-01-01 Online:2008-05-25 Published:2008-05-25

Abstract

Abstract: The mechanism of weld line formation in LCD TV underprops molded by traditional runner system was analyzed. In a novel design of runner system, the melt would pass two gates and meet in a second runner and subsequently fill the mould in the form of an expansion flow. The melt flow process in the molding of LCD TV underprops was analyzed using Moldflow software. It was found that the novel design could effectually avoid the weld line formation in the products.

Key words: LCD TV underprop, no weld line technology, injection molding, runner system, optimum design

XIAO Fang-cheng, OU Xiang-lin, hU Hai-tao, WU Shi-jian. Optimum Design of Runner System for LCD TV Underprops without Weld Lines[J]. China Plastics, 2008, 22(05): 87-90 .

[1]	HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan. Injection defect analysis and molding optimization of high⁃gloss grille for an automobile [J]. China Plastics, 2022, 36(9): 70-73.
[2]	XU Yuxuan, DANG Kaifang, FU Nanhong, JIAO Xiaolong, XIE Pengcheng, YANG Weimin. Research progress in adaptive optimization technology for injection molding process [J]. China Plastics, 2022, 36(9): 180-186.
[3]	WANG Xiaodong, WANG Quan, CHEN Tuo, ZHENG Yue. Optimization of multi⁃objective parameters for double color injection⁃molding based on grey relational analysis and entropy weight method [J]. China Plastics, 2022, 36(7): 115-120.
[4]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[5]	DENG Shixin, WANG Jian, YANG Weimin. Simulation and analysis of fluid high⁃pressure and high⁃speed collision in mixing head cavity of enhanced reaction injection molding machine [J]. China Plastics, 2022, 36(6): 130-136.
[6]	SUN Wenbo, XIN Chunling, HE Yadong, ZHAI Yujiao, YAN Baorui. Influence of micro⁃foaming injection molding process on cell structure of glass⁃fiber⁃reinforced PBT products [J]. China Plastics, 2022, 36(5): 1-7.
[7]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on process parameters for filling process of polypropylene microcellular injection molding under supercritical N₂ [J]. China Plastics, 2022, 36(3): 69-74.
[8]	LIU Ganhua, TANG Naifu, MA Ruiwu. Multi⁃objective optimization for MIM process parameters of equal⁃distance spiral bevel gear [J]. China Plastics, 2022, 36(3): 96-103.
[9]	ZHANG Xiang, YAN Zhenhao, KONG Xiaoya, ZHU Jianxiao, GUAN Guotao, ZHAO Na, LI Qian. Study on structural optimization of disc screw in micro injection machine [J]. China Plastics, 2022, 36(2): 147-156.
[10]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on surface quality optimization of microfoaming injection⁃molded products [J]. China Plastics, 2022, 36(2): 19-26.
[11]	HUANG Wei, LIU Hesheng, HUANG Xingyuan, ZHANG Wei, KUANG Tangqing, CHEN Zhongshi. Study on high⁃pressure water penetration behavior of square cross⁃sectional pipes based on short⁃glass⁃fiber⁃reinforced polypropylene [J]. China Plastics, 2022, 36(2): 82-88.
[12]	REN Lihui, LI Fuzhu, WANG Yun, DAI Yachun, YANG Hui, XU Zhenying. Multi⁃objective optimization of injection molding quality based on TOPSIS⁃grey relational analysis [J]. China Plastics, 2022, 36(2): 96-102.
[13]	ZHENG Fangli, FU Nanhong, JIAO Xiaolong, YANG Weimin, XIE Pengcheng. Research progress in applications and optimization of artificial intelligence technology in injection molding parameters setting [J]. China Plastics, 2022, 36(1): 84-91.
[14]	QIAO Linjun, XIN Chunling, HE Yadong, ZHAI Yujiao, YAN Baorui. Visualization Study on Gas Injection Process of A New Type of Micro⁃foaming Gas Injector [J]. China Plastics, 2021, 35(9): 128-135.
[15]	ZHA Yan, ZHENG Fangli, XIAO Jian, YANG Weimin, XIE Pengcheng. Research on the Application of Co⁃simulation in the Reduced Design of Automotive Injection Parts [J]. China Plastics, 2021, 35(8): 112-116.

Optimum Design of Runner System for LCD TV Underprops without Weld Lines

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments