[1] |
MENG Xin, WANG Xiaolong, GONG Weiguang, JIN Yi.
Preparation of three⁃sources⁃in⁃one shell⁃core structural flame retardants and its application in poly(lactic acid)
[J]. China Plastics, 2022, 36(9): 96-104.
|
[2] |
DONG Shaoce, LI Chenggao, ZHANG Xufeng, XIAN Guijun.
Environmental impact assessment for manufacture of plant fiber honeycomb core
[J]. China Plastics, 2022, 36(6): 108-115.
|
[3] |
XU Yonglin, ZHANG Weihe, FENG Guoshu, SONG Dongyang, DU Hai, WANG Jing, WEI Haitao.
Design of injection mold with complex core pulling and conformal cooling channel for smart kettle shell
[J]. China Plastics, 2022, 36(6): 137-141.
|
[4] |
ZHANG Weihe, FENG Guoshu, ZHU Xiaoming, WU Zichun, YE Mingshan, DU Hai, SONG Dongyang, WANG Jing.
Design of large and thin⁃welled injection mold with SVG for car right⁃tuer hinten
[J]. China Plastics, 2022, 36(1): 166-171.
|
[5] |
SHENG Tianyang, TAN Jing, ZHANG Zhenghe, GAO Xiaodong, YU Jingchao, CHENG Lisheng, YANG Weimin.
Numerical Simulation of Polyacrylonitrile Gel Flow Characteristics in Laminated Runner
[J]. China Plastics, 2021, 35(7): 74-79.
|
[6] |
LIU Qingdong.
Design of Injection Mould with Oblique Core⁃pulling on Both Sides of Moving and Fixed Molds along Mold Opening Diagonal Direction
[J]. China Plastics, 2021, 35(6): 100-105.
|
[7] |
GONG Meihua, ZHANG Xiaojuan, WEN Bianying.
Research Progress in Preparation of Polypyrrole/Inorganic Nanoparticle Composites and their Electromagnetic Shielding Performance
[J]. China Plastics, 2021, 35(5): 126-134.
|
[8] |
XIONG Yi, WANG Wei.
Design of Two⁃stage Side Core⁃pulling Injection Mold for Special⁃shaped Parts with Four Sides and Six Undercuts
[J]. China Plastics, 2021, 35(2): 101-106.
|
[9] |
SUN Lingzhen, YE Shuo.
Design of injection mold for split air conditioning chassis
[J]. China Plastics, 2021, 35(12): 129-136.
|
[10] |
ZHOU Jianan.
Design of Injection Mould for Face Cover of Driving Recorder
[J]. China Plastics, 2021, 35(11): 133-137.
|
[11] |
LI Shao, WANG Xiaoxin, ZHOU Lehui, FU Nuofeng, ZHONG Jianquan.
Research on the Influence of Plastic Viscosity and Product Thickness on Core Penetration Effect of Sandwich Injection Molding
[J]. China Plastics, 2021, 35(10): 83-87.
|
[12] |
LIU Hongyan.
Design of Hot Runner Injection Mold with Two Types of Multiple Core⁃pulling Mechanisms for Booster Cylinder
[J]. China Plastics, 2021, 35(1): 103-109.
|
[13] |
XU Xinhua.
Design of Hot Runner Mould for Control-Knob Bi-color Injection Molding
[J]. China Plastics, 2020, 34(9): 84-89.
|
[14] |
Yiren GAO, Minjie WANG, Hongxia LI.
Reason and Regularity of Injection Mold Wear for Glass⁃fiber⁃reinforced Part
[J]. China Plastics, 2020, 34(8): 44-49.
|
[15] |
Ligang DING, Guofei CHENG, Wenqiang WEI, Siqiao HU, Kaixiang GUO.
Design of Front Mold Core Pulling Injection Mold with S⁃type Valve Chamber
[J]. China Plastics, 2020, 34(8): 95-100.
|