Effect of Crystallization Behavior and Transparency of Rosin Nucleated PP with Disperdsant Agent

doi:10.19491/j.issn.1001-9278.2010.12.021

China Plastics ›› 2010, Vol. 24 ›› Issue (12): 98-101 .DOI: 10.19491/j.issn.1001-9278.2010.12.021

Previous Articles Next Articles

Effect of Crystallization Behavior and Transparency of Rosin Nucleated PP with Disperdsant Agent

Yaozhu Tian Song WANG Jun QIN Zhu LUO Jie YU

Received:2010-08-23 Revised:2010-11-23 Online:2010-12-26 Published:2010-12-26

Abstract

Abstract: The effect of dispersant on the non-isothermal crystallization behavior of neat PP and rosin-nucleated PP was studied by means of DSC and PLM. It showed that dispersant A and C could increase crystallization temperature and crystallization rate, and decrease the spherulite sizes. However, the effect of dispersant B was moderate. Key words: polypropylene；rosin type nucleating agent；dispersant agent；non-isothermal crystallization

Key words: rosin type nucleating agent, dispersant agent, non-isothermal crystalling, polypropylene

CLC Number:

TQ325

Yaozhu Tian Song WANG Jun QIN Zhu LUO Jie YU. Effect of Crystallization Behavior and Transparency of Rosin Nucleated PP with Disperdsant Agent[J]. China Plastics, 2010, 24(12): 98-101 .

[1]	ZHANG Lin, XIA Zhangchuan, HE Yadong, XIN Chunling, WANG Ruixue, REN Feng. Influence of gas flow of plasma jet carrier on modification effect for glass fiber [J]. China Plastics, 2022, 36(9): 7-15.
[2]	ZHANG Bing. Study on test of oxidation induction time for random copolymer polypropylene pipe [J]. China Plastics, 2022, 36(8): 107-109.
[3]	ZHAO Hongjing, ZHU Jiang. Study on numerical simulation of two⁃phase extrusion for micro/nano⁃laminated natural rubber/polypropylene [J]. China Plastics, 2022, 36(8): 110-114.
[4]	LIU Yi, WANG Ye, SUN Wei, QU Guoxing, XU Xia, YANG Shaolin, YUAN Ning. Determination of content of transparent nucleating agent in polypropylene using infrared spectroscopy [J]. China Plastics, 2022, 36(8): 115-118.
[5]	ZHANG Taozhong, CHEN Xiaolong, HAO Xiaoyu, YU Fujia. Comparison of mechanical properties and interfacial interactions of polypropylene composites filled with talc， calcium carbonate， and barium sulfate [J]. China Plastics, 2022, 36(8): 36-41.
[6]	WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu. Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism [J]. China Plastics, 2022, 36(7): 1-7.
[7]	YU Changyong, XIN Zhong. Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene [J]. China Plastics, 2022, 36(7): 121-128.
[8]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[9]	SUN Wei, LIU Yi, LIAO Yunlong, CHEN Junjia. Study on influence factors for determination of ethylene content in polypropylene powder [J]. China Plastics, 2022, 36(6): 54-59.
[10]	WANG Qingsong. Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC [J]. China Plastics, 2022, 36(4): 30-34.
[11]	WANG Fuyu, GUO Jinqiang, ZHANG Yuxia. In⁃situ fibrillation methods of polymer blends and their application in PP⁃based blends [J]. China Plastics, 2022, 36(3): 146-156.
[12]	LI Rui, JIANG Yanfeng, WU Shuang, AN Yanjie, JIANG Zeyu, ZHANG Mingqiang. Microstructure and thermal characterization of polypropylene special material for cast films through temperature rising elution fractionation [J]. China Plastics, 2022, 36(3): 53-57.
[13]	CAO Zhifeng, ZHAO Lipin, HE Ting, MA Baijun. Preparation and properties of five⁃layer co⁃extrusion barrier films [J]. China Plastics, 2022, 36(3): 64-68.
[14]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on process parameters for filling process of polypropylene microcellular injection molding under supercritical N₂ [J]. China Plastics, 2022, 36(3): 69-74.
[15]	SONG Renda, WU Gaojian, CHEN Junxiang, ZHANG Youchen, YANG Weimin, XIE Pengcheng. Preparation and its electromagnetic shielding performance of PP/PET/CNTs foaming composites [J]. China Plastics, 2022, 36(2): 1-7.

Effect of Crystallization Behavior and Transparency of Rosin Nucleated PP with Disperdsant Agent

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments