Study on Tribological Behavior of Basalt Fiber Reinforced Polyphenylene Sulfide Composites

doi:10.19491/j.issn.1001-9278.2013.08.008

China Plastics ›› 2013, Vol. 27 ›› Issue (08): 42-44.DOI: 10.19491/j.issn.1001-9278.2013.08.008

Previous Articles Next Articles

Study on Tribological Behavior of Basalt Fiber Reinforced Polyphenylene Sulfide Composites

WANG Hongliang

Department of Electrical Engineering, Xijing University, Xi'an 710123,China

Received:2013-04-07 Revised:2013-05-24 Online:2013-08-26 Published:2020-11-16

Abstract

CLC Number:

TQ327. 3

WANG Hongliang. Study on Tribological Behavior of Basalt Fiber Reinforced Polyphenylene Sulfide Composites[J]. China Plastics, 2013, 27(08): 42-44.

[1]	LIU Lang, LUAN Daocheng, HU Zhihua, WEN Kelin, ZHOU Xinyu, MI Shuheng, WANG Zhengyun. Effects of basalt fiber and steel fiber contents on properties of resin⁃based friction materials [J]. China Plastics, 2022, 36(3): 33-39.
[2]	XING Jian, ZHANG Shucheng, YU Qin, LI Changlong, XU Zhenzhen. Effect of High Temperature Antioxidant on Structure and Properties of Polyphenylene Sulfide [J]. China Plastics, 2021, 35(4): 79-85.
[3]	Dayou DING, Yulu MA, Linsheng XIE, Huihao ZHU, Xiliang SHAN. Preparation of PPS/CF Composites by a Twin⁃rotor Continuous Mixing Extruder [J]. China Plastics, 2020, 34(8): 50-56.
[4]	. Effect of Lacquer-seed-shell-fiber Content on Mechanical and Tribological Properties of Polyoxymethylene/Basalt Fiber Composites [J]. China Plastics, 2017, 31(4): 40-44 .
[5]	. Study on Preparation and Properties of Poly(lactic acid)/Basalt Fiber Composite [J]. China Plastics, 2016, 30(11): 0-0 .
[6]	. Study on Properties of PPES/PPS Blends [J]. China Plastics, 2016, 30(09): 31-34 .
[7]	. Study on Mechanical Properties of Poly(methyl-vinyl siloxane)-toughened Poly (phenylene sulfide) [J]. China Plastics, 2015, 29(03): 51-56 .
[8]	. Process and Properties of Reinforced Composites by Basalt Fiber Unidirectional Fabric [J]. China Plastics, 2014, 28(07): 0-59 .
[9]	. Study on Properties of Microcellular PPS Foams Prepared by Microcellular Injection Molding [J]. China Plastics, 2012, 26(09): 72-78 .
[10]	ZHANG Shouyu NIU Pengfei HUANG Baokui WANG Xiaojun YANG Jie. Effect of Drawing Process on Structure and Properties of Polyphenylene Sulfide Films [J]. China Plastics, 2012, 26(03): 67-70 .
[11]	KONG Qing;CUI Ning;ZHANG Zhiying;DONG Zhizhi. Study on Rheological Behavior of Poly（phenylene sulfide） [J]. China Plastics, 2011, 25(07): 23-26 .
[12]	Fei Wei . Experimental Study on Flexural Behavior of Post-tensioned Method Unbonded Prestressed Concrete Beams Reinforced with BFRP Tendons [J]. China Plastics, 2011, 25(05): 79-84 .
[13]	ZHOU Junlong LI Binghong JIANG Shiyong SHI Qianhua HU Xianqi. Experimental Study on Bond Behavior of BFRP Bars Embedded in Concrete by Beam Test [J]. China Plastics, 2011, 25(04): 83-88 .
[14]	LI Binghong JIANG Shiyong FEI Wei. Finite Element Analysis of Flexural Failure Mode of Concrete Beams Reinforced with BFRP Bars [J]. China Plastics, 2010, 24(04): 70-75 .
[15]	LI Bing-hong JIANG Shi-yong FEI Wei ZHOU Hai-liang. Study on Flexural Behavior of Concrete Beams Reinforced with BFRP Bars [J]. China Plastics, 2009, 23(07): 69-72 .

Study on Tribological Behavior of Basalt Fiber Reinforced Polyphenylene Sulfide Composites

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments