Injection Mould Design for Highgloss and Nonweld Line Front Cabinet of TV Based on Moldflow

doi:10.19491/j.issn.1001-9278.2014.02.021

China Plastics ›› 2014, Vol. 28 ›› Issue (02): 106-110.DOI: 10.19491/j.issn.1001-9278.2014.02.021

Injection Mould Design for Highgloss and Nonweld Line Front Cabinet of TV Based on Moldflow

Hong Jian-Ming

Received:2013-08-16 Revised:1900-01-01 Online:2014-02-26 Published:2014-02-26

Abstract

Abstract: With the front cabinet of LCD TV as an example, the design of runner system, temperature control system, and complex corepulling mechanism were discussed, to complete the overall design of a highgloss and nonweld line injection mold. The mold design was also simulated using Moldflow software, the working situation of complex runner and temperature control systems was verified in variation of moldtemperature.

Key words: front cabinet of television, high-gloss & non-weld line, flow analysis, injection mould

CLC Number:

TQ320.66+2

Hong Jian-Ming. Injection Mould Design for Highgloss and Nonweld Line Front Cabinet of TV Based on Moldflow[J]. China Plastics, 2014, 28(02): 106-110.

[1]	WANG Yang, CHENG Lisheng, TAN Jing, YANG Weimin, WANG Ruixue, ZHANG Zhenghe. Moldflow analysis of influence of filler on polyether ether ketone injection molding [J]. China Plastics, 2022, 36(5): 68-74.
[2]	ZHANG Weihe, FENG Guoshu, ZHU Xiaoming, WU Zichun, YE Mingshan, DU Hai, SONG Dongyang, WANG Jing. Design of large and thin⁃welled injection mold with SVG for car right⁃tuer hinten [J]. China Plastics, 2022, 36(1): 166-171.
[3]	Ligang DING, Guofei CHENG, Wenqiang WEI, Siqiao HU, Kaixiang GUO. Design of Front Mold Core Pulling Injection Mold with S⁃type Valve Chamber [J]. China Plastics, 2020, 34(8): 95-100.
[4]	LIU Xin, GUO Hengya, HUANG Ming. Design of Opposite-Type Bicolor Injection Mold for Automotive Windshield Decoration Strip [J]. China Plastics, 2019, 33(10): 100-104.
[5]	Qing-Dong LIU. Design of Bicolor Injection Moulds for an Interior Trim Part in Bentley Automobiles [J]. China Plastics, 2017, 31(08): 122-126 .
[6]	. Innovation Design of Injection Molds for Military Telescope Shells Based on Intersectional Slider Threaded Core-pulling Mechanism [J]. China Plastics, 2017, 31(04): 97-101 .
[7]	. Moldflow Analysis and Process Optimization for Sequentially Injection-molded Auto Front Bumpers [J]. China Plastics, 2017, 31(03): 64-68 .
[8]	. Design of Large Injection Moulds for Printer Base Boards [J]. China Plastics, 2016, 30(07): 107-111 .
[9]	. Injection Mould Design for Mounting Plates of High Frequency Electric Couplers [J]. China Plastics, 2015, 29(10): 94-97 .
[10]	. Design of Injection Moulds for 45 ° Elbow Pipe Fittings [J]. China Plastics, 2015, 29(07): 117-120 .
[11]	. Two-component Injection Mould Design for Automobile Grilles [J]. China Plastics, 2015, 29(07): 112-116 .
[12]	. Injection Mould Design of Telephone Receiver [J]. China Plastics, 2015, 29(05): 106-110 .
[13]	. Design of Injection Mould for a Pair of Louver Heads [J]. China Plastics, 2014, 28(05): 111-114 .
[14]	. Design of Injection Mould for Three Different Shapes of Shutter [J]. China Plastics, 2014, 28(03): 101-105 .
[15]	. Injection Mold Design of Glove Box Based on Moldflow Analysis [J]. China Plastics, 2013, 27(12): 98-102 .

Injection Mould Design for Highgloss and Nonweld Line Front Cabinet of TV Based on Moldflow

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments