Study on the Energy Consumption in Filling Stage Based on the Software of Moldflow MPI

doi:10.19491/j.issn.1001-9278.2015.04.013

China Plastics ›› 2015, Vol. 29 ›› Issue (04): 70-74 .DOI: 10.19491/j.issn.1001-9278.2015.04.013

Study on the Energy Consumption in Filling Stage Based on the Software of Moldflow MPI

Received:2014-11-24 Revised:2015-01-15 Online:2015-04-26 Published:2015-04-26

Abstract

Abstract: This paper established a relationship among energy consumption and four factors, width of the gate, wall thickness of the products, injection velocity, and diameter of the products, using Moldflow, orthogonal test, and multivariate fitting. The accuracy of the formula for energy consumption was higher than 90 %.

Key words: injection molding, energy consumption, Moldflow, orthogonal test, multivariate fitting

[1]	HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan. Injection defect analysis and molding optimization of high⁃gloss grille for an automobile [J]. China Plastics, 2022, 36(9): 70-73.
[2]	XU Yuxuan, DANG Kaifang, FU Nanhong, JIAO Xiaolong, XIE Pengcheng, YANG Weimin. Research progress in adaptive optimization technology for injection molding process [J]. China Plastics, 2022, 36(9): 180-186.
[3]	WANG Xiaodong, WANG Quan, CHEN Tuo, ZHENG Yue. Optimization of multi⁃objective parameters for double color injection⁃molding based on grey relational analysis and entropy weight method [J]. China Plastics, 2022, 36(7): 115-120.
[4]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[5]	DENG Shixin, WANG Jian, YANG Weimin. Simulation and analysis of fluid high⁃pressure and high⁃speed collision in mixing head cavity of enhanced reaction injection molding machine [J]. China Plastics, 2022, 36(6): 130-136.
[6]	SUN Wenbo, XIN Chunling, HE Yadong, ZHAI Yujiao, YAN Baorui. Influence of micro⁃foaming injection molding process on cell structure of glass⁃fiber⁃reinforced PBT products [J]. China Plastics, 2022, 36(5): 1-7.
[7]	WANG Yang, CHENG Lisheng, TAN Jing, YANG Weimin, WANG Ruixue, ZHANG Zhenghe. Moldflow analysis of influence of filler on polyether ether ketone injection molding [J]. China Plastics, 2022, 36(5): 68-74.
[8]	TAN Lei, HUANG Xingyuan, WANG Han, PAN Liuwen. Analysis of temperature field in melting chamber of hot⁃air melting waste plastic granulator [J]. China Plastics, 2022, 36(4): 149-157.
[9]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on process parameters for filling process of polypropylene microcellular injection molding under supercritical N₂ [J]. China Plastics, 2022, 36(3): 69-74.
[10]	LIU Ganhua, TANG Naifu, MA Ruiwu. Multi⁃objective optimization for MIM process parameters of equal⁃distance spiral bevel gear [J]. China Plastics, 2022, 36(3): 96-103.
[11]	ZHANG Xiang, YAN Zhenhao, KONG Xiaoya, ZHU Jianxiao, GUAN Guotao, ZHAO Na, LI Qian. Study on structural optimization of disc screw in micro injection machine [J]. China Plastics, 2022, 36(2): 147-156.
[12]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on surface quality optimization of microfoaming injection⁃molded products [J]. China Plastics, 2022, 36(2): 19-26.
[13]	HUANG Wei, LIU Hesheng, HUANG Xingyuan, ZHANG Wei, KUANG Tangqing, CHEN Zhongshi. Study on high⁃pressure water penetration behavior of square cross⁃sectional pipes based on short⁃glass⁃fiber⁃reinforced polypropylene [J]. China Plastics, 2022, 36(2): 82-88.
[14]	REN Lihui, LI Fuzhu, WANG Yun, DAI Yachun, YANG Hui, XU Zhenying. Multi⁃objective optimization of injection molding quality based on TOPSIS⁃grey relational analysis [J]. China Plastics, 2022, 36(2): 96-102.
[15]	ZHENG Fangli, FU Nanhong, JIAO Xiaolong, YANG Weimin, XIE Pengcheng. Research progress in applications and optimization of artificial intelligence technology in injection molding parameters setting [J]. China Plastics, 2022, 36(1): 84-91.

Study on the Energy Consumption in Filling Stage Based on the Software of Moldflow MPI

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments