Application of 3D Printing Rapid Prototyping Technology in Processing of Polymeric Materials

doi:10.19491/j.issn.1001-9278.2017.05.002

China Plastics ›› 2017, Vol. 31 ›› Issue (5): 6-12 .DOI: 10.19491/j.issn.1001-9278.2017.05.002

Application of 3D Printing Rapid Prototyping Technology in Processing of Polymeric Materials

Received:2016-11-28 Revised:2017-02-24 Online:2017-05-26 Published:2017-05-26

Abstract

Abstract: The article reviewed the influence of materials on the development of 3D printing rapid prototyping technology (3D printing technology) and industrialization process and also introduced the promoting effect of rapid development of polymeric materials on 3D printing technology and its industrial chain. The articles summarized the application of polymeric materials specially used for 3D printing rapid prototyping process in recent years. The application of 3D printing rapid prototyping technology in polymers, processing was introduced and its prospect was forecasted.

Key words: 3D printing rapid prototyping technology, polymer material, processing method, preparation

[1]	YANG Xiaolong, CHEN Wenjing, LI Yongqing, YAN Xiaokun, WANG Xiulei, XIE Pengcheng, MA Xiuqing. Research progress in polymer/graphene conductive composites [J]. China Plastics, 2022, 36(6): 165-173.
[2]	WANG Rongchen, ZHANG Heng, SUN Huanwei, DUAN Shuxia, QIN Zixuan, LI Han, ZHU Feichao, ZHANG Yifeng. Research progress in preparation and hydrophilic modification of polylactic acid nonwovens for medical and health applications [J]. China Plastics, 2022, 36(5): 158-166.
[3]	LIU Wen, SHI Wenzhao, LIU Jinshu, LU Shaofeng, ZHOU Hongjuan. Research progress in electro⁃active shape memory composite materials [J]. China Plastics, 2022, 36(4): 175-189.
[4]	LI Yushan, LI Jie. Research progress in durable super⁃hydrophobic surface based on PDMS [J]. China Plastics, 2022, 36(3): 167-176.
[5]	LIU Yankuan, GU Zichen, WANG Zhiping. Preparation technology and development trend of continuous⁃fiber⁃reinforced thermoplastic prepregs [J]. China Plastics, 2022, 36(2): 172-181.
[6]	ZHANG Zhouya, BAI Shijian, ZHANG Yuxia, ZHOU Hongfu, GONG Fangfang, TANG Xueguli, WANG Bin. Research Progress in Factors Affecting Thermal Conductivity of Polymeric Materials [J]. China Plastics, 2021, 35(9): 156-165.
[7]	MA Chaoqun, SHI Wenzhao, CUI Shanshan, ZHANG Manyan, ZHOU Hongjuan. Research Progress in Polyvinyl Alcohol⁃based Porous Composites [J]. China Plastics, 2021, 35(4): 116-123.
[8]	XU Meng, GAO Dali, ZHANG Shijun. Progress and Upgrade of Food Packaging Polymer Materials [J]. China Plastics, 2021, 35(3): 74-82.
[9]	YANG Xiaolong, LI Yongqing, YAN Xiaokun, CHEN Wenjing, MA Xiuqing. Research progress in gas barrier polymer/graphene composites [J]. China Plastics, 2021, 35(12): 145-153.
[10]	FANG Yunfeng, MA Biao, WANG Xiaoqing, KANG Xingxiang, TANG Yuting. Research progress in latent curing agent for one⁃component epoxy resin [J]. China Plastics, 2021, 35(12): 154-165.
[11]	Xiang YU, Huanhuan TAN, Zhuo WANG, Yukun ZHANG, Yanfei AN, Junjie ZHAO. Preparation and Performance Investigation of PA6/Aerogel Composite Powders with Phase Change Function by Solvent Precipitation Method [J]. China Plastics, 2020, 34(8): 71-77.
[12]	WEI Shiyi, TANG Yuntao, CHAI Chenze, ZHANG Yuxia, ZHOU Hongfu. Research Progress in Poly（lactic acid） Open⁃Cell Materials [J]. China Plastics, 2020, 34(10): 100-109.
[13]	. Research Progresses in Branched Polyamide 6 [J]. China Plastics, 2017, 31(8): 1-6 .
[14]	. Research Status and Hot Spots of Polymer Materials Based on Literature Metrology [J]. China Plastics, 2017, 31(6): 8-15 .
[15]	. On-line Test Technique for PVT Property of Polymer Materials and Its Application in Mold Design [J]. China Plastics, 2016, 30(07): 57-61 .

Application of 3D Printing Rapid Prototyping Technology in Processing of Polymeric Materials

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments