Research Progress in ABS Materials for 3D Printing

doi:10.19491/j.issn.1001-9278.2019.12.018

Abstract

Abstract: This paper briefly introduced the 3D printing and fused deposition molding technologies and also mentioned the problems in the acrylonitrile-butadiene-styrene copolymer (ABS)materials used for 3D printing. Furthermore, the ingredients, preparation technology, 3D printing processing, performance and applications of ABS materials used for the 3D printing were discussed. It is important for researchers to make effort to improve the mechanical performance of 3D printed products with the ABS materials as well as to endow them with more special properties so as to extend the application range of ABS materials for 3D printing.

Key words: three-dimensionalprinting, acrylonitrile-butadiene styrene copolymer, research progress

CLC Number:

YE Xuan, TU Huajin. Research Progress in ABS Materials for 3D Printing[J]. China Plastics, 2019, 33(12): 101-108.

References

[1] The third industrial revolution. The Economist, 2012-4-21.
[2] McMenamin P G, Quayle M R, McHenry C R, et al. The production of anatomical teaching resources using three-dimensional(3D) printing technology[J]. Anatomical Sci Education, 2014, 7(6): 479.
[3] Goyanes A, Wang J, Buanz A, et al. 3D printing of medicines: engineering novel oral devices with unique design and drug release characteristics[J]. Molecular Pharmaceutics, 2015, 12(11): 4077.
[4] Gunther D, Heymel B, Gunther J F, et al. Continuous 3D-printing for additive manufacturing[J]. Rapid Prototyping J, 2014, 20(4): 320.
[5] Paulsen S J, Miller J S. Tissue vascularization through 3D printing: Will technology bring us flow?[J]. Developmental Dynamics, 2015, 244(5): 629.
[6] 陈硕平, 易和平, 罗志虹等. 高分子3D打印材料和打印工艺[J]. 材料导报, 2016, 30(4): 54.
[7] 王延庆, 沈竞兴, 吴海全. 3D打印材料应用和研究现状[J]. 航空材料学报, 2016, 36(4): 89.
[8] 张胜, 徐艳松, 孙姗姗等. 3D打印材料的研究及发展现状[J]. 中国塑料, 2016, 30(1): 7.
[9] 陈彩珠, 潘汉军. 3D打印高分子材料研究进展[J]. 工程塑料应用, 2016, 44(9): 137.
[10] 尹远, 汪艳. 3D打印PC/ABS合金的性能[J]. 工程塑料应用, 2018, 46(8): 34.
[11] 方禄辉, 孙东成, 曹艳霞等. SBS对3D打印ABS性能的影响[J]. 工程塑料应用, 2015, 43(9): 54.
[12] 方禄辉, 孙东成, 曹艳霞等. 不同苯乙烯类嵌段共聚物对3D打印用ABS性能影响[J]. 塑料工业, 2015, 43(10): 75.
[13] 乔雯钰, 徐欢, 马超等. 3D打印用ABS丝材性能研究[J]. 工程塑料应用, 2016, 44(3): 18.
[14] 仲伟虹, 李凡, 张佐光等. 适于快速成型制造工艺的短纤维增强复合材料研究[J]. 复合材料学报, 2000, 17(4): 43.
[15] 肖建华. 3D打印用碳纤维增强热塑性树脂的挤出成型[J]. 塑料工业, 2016, 44(6): 46.
[16] Lonnie J Love, Vlastamil Kunc, Orlando Rios, et al. The importance of carbon fiber to polymer additive manufacturing[J]. J. Mater. Res. 2014, 29(17): 1893.
[17] 诸金, 王金刀, 张坚等. 基于FDM的3D打印SCF/ABS复合材料的结构与性能[J]. 塑料, 2018, 47(2): 46.
[18] Chuncheng Yang, Xiaoyong Tian, Tengfei Liu, et al. 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance[J]. 2017, 23(1): 209.
[19] 诸葛祥群, 岑发源, 成天耀等. MWNTs/ABS导电3D打印复合丝材的制备与性能[J]. 2017, 46(2): 62.
[20] 李前进, 诸葛祥群, 赵俊等. 石墨/丙烯腈-丁二烯-苯乙烯共聚物导电3D打印复合丝材的制备与性能研究[J]. 化工新型材料, 2018, 46(11): 72.
[21] Dul S, Fambri L, Pegoretti, A. Fused deposition modeling with ABS-graphene nanocomposites[J]. Composites Part A: Applied Science and Manufacturing, 2016, (85): 181.
[22] 唐慧. 高效光催化剂的制备及其对3D打印塑料丝材的性能影响研究[D]. 福建: 福建师范大学, 2016.
[23] Angel R. Torrado Perez, David A. Roberson, Ryan B. Wicker. Wicker. Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials[J]. J Fail. Journal of Failure Analysis and Prevention, 2014, 14(3): 343.
[24] Matthew R Skorski, Jake M Esenther, Zeeshan Ahmed, et al. The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites[J]. Science and Technology of Advanced Materials, 2016, 17(1): 89.
[25] Angel R, Torrado Corey M, Shemelya Joel D. Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing[J]. Additive Manufacturing, 2015, 6:16.
[26] Rocha C R, Torrado Perez A R, Roberson D A, et al. Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing[J]. Journal of Materials Research, 2014, 29(17):1859.
[27] 郑晗. 基于聚氨酯的多重形状记忆聚合物的制备与挤出研究[D]. 哈尔滨: 哈尔滨工业大学, 2016.
[28] Wang Y, Castles F, Grant P S. 3D Printing of NiZn ferrite/ABS Magnetic Composites for Electromagnetic Devices[J]. MRS Proceedings, 2015, 1788:29.
[29] Jaya Christiyan K G, Chandrasekhar U, Venkateswarlu K. A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite[J]. IOP Conference Series Materials Science and Engineering, 2016, 114: 012109.
[30] Weng Z, Wang J, Senthil T, et al. Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing[J]. Materials & Design, 2016, 102:276.
[31] Castles F, Isakov D, Lui A, et al. Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites[J]. Scientific Reports, 2016, 6:22714.
[32] Chao-Chung Kuo, Lung-Chang Liu, Wei-Feng Teng, et al. Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications[J]. Composites Part B Engineering, 2016, 86:36.
[33] Hwang S, Reyes E I, Moon K S, et al. Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process[J]. Journal of Electronic Materials, 2015, 44(3):771.
[34] Stansbury J W, Idacavage M J. 3D printing with polymers: Challenges among expanding options and opportunities[J]. Dental Materials, 2015, 32(1); 54.
[35] Melnikova R, Ehrmann A, Finsterbusch K. 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials[J]. IOP Conference Series Materials Science and Engineering, 2014, 62(1): 012018.
[36] 乔女. 基于APDL的ABS材料FDM-3D打印温度场有限元分析[J]. 航空精密制造技术, 2017, 53(2): 41.
[37] 乔女. ABS塑料3D打印过程中热应力耦合场分析与优化[J]. 塑料, 2017, 46(05): 24.
[38] Dawoud M, Taha I, Ebeid S J. Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques[J]. Journal of Manufacturing Processes, 2016, 21:39.
[39] P J Nu?eza, A Rivasa, E García-Plaza, et al. Dimensional and surface texture characterization in Fused Deposition Modelling (FDM) with ABS plus[J]. Procedia Engineering, 2015, 132: 856.
[40] Cantrell J T, Rohde S, Damiani D, et al. Experimental characterization of the mechanical properties of 3D-Printed ABS and polycarbonate parts[J]. Rapid Prototyping Journal, 2016, 23(4): 89.
[41] Cole D P, Riddick J C, Iftekhar Jaim H M, et al. Interfacial mechanical behavior of 3D printed ABS[J]. Journal of Applied Polymer Science, 2016, 133(30): 43671.
[42] Rankouhi B, Javadpour S, Delfanian F, et al. Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation[J]. Journal of Failure Analysis and Prevention, 2016, 16(3): 467.
[43] Tymrak B M, Kreiger M, Pearce J M. Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions[J]. Materials & Design, 2014, 58: 242.
[44] Kantaros A, Karalekas D. Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process[J]. Materials & Design, 2013, 50: 44.
[45] Liseli Baich, Guha Manogharan, Hazel Marie. Study of infill print design on production cost-time of 3D printed ABS parts[J]. Int. J. Rapid Manufacturing, 2015, 5: 308.
[46] Wenzheng W, Peng G, Guiwei L, et al. Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS[J]. Materials, 2015, 8(9): 5834.
[47] Mccullough E J, Yadavalli V K. Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices[J]. Journal of Materials Processing Technology, 2013, 213(6): 947.
[48] 龚运息, 蓝绍东. 空调开关座样件的3D打印及性能测试分析[J]. 现代制造工程, 2018, 451(04):48.
[49] Derek R, Eric C, Thomas S, et al. 3D-Printed ABS and PLA Scaffolds for Cartilage and, Nucleus Pulposus Tissue Regeneration[J]. International Journal of Molecular Sciences, 2015, 16(12): 15118.
[50] Harris B D, Nilsson S, Poole C M. A feasibility study for using ABS plastic and a low-cost 3D printer for patient-specific brachytherapy mould design[J]. Australasian Physical & Engineering Sciences in Medicine, 2015, 38(3): 399.
[51] Satyanarayana B, Prakash K J. Component Replication Using 3D Printing Technology[J]. Procedia Materials Science, 2015, 10: 263.
[52] Mirzaee M, Noghanian S, Wiest L, et al. Developing flexible 3D printed antenna using conductive ABS materials[C]. IEEE International Symposium on Antennas & Propagation & Usnc/ursi National Radio Science Meeting. IEEE, 2015.
[53] Ahn S H, Lee K T, Kim H J, et al. Smart soft composite: An integrated 3D soft morphing structure using bend-twist coupling of anisotropic materials[J]. International Journal of Precision Engineering & Manufacturing, 2012, 13(4): 631.