Research progress in of polymer gas⁃assisted extrusion technology and its and applications

doi:10.19491/j.issn.1001-9278.2025.03.021

Abstract

Abstract:

This paper introduced the research history and practical application of polymer gas⁃assisted extrusion technology， outlined the influence of different process parameters of gas on product quality during gas⁃assisted extrusion molding， briefly described the applications and development of computer simulation technology in gas⁃assisted extrusion， and provided a prospect for the research and practical applications of the gas⁃assisted extrusion technology based on the existing researches and technologies.

Key words: polymer, gas?assisted extrusion, gas process parameter, numerical simulation

CLC Number:

TQ320.66⁺3

WANG Yu, ZHANG Yajun, ZHENG Yongbiao, GAO Cong. Research progress in of polymer gas⁃assisted extrusion technology and its and applications[J]. China Plastics, 2025, 39(3): 114-117.

References 21

1	侯成龙，程玲玲，侯景杰，等.挤出成型技术发展综述［J］.精密成形工程，2023，15（06）：209⁃221.
	HOU C L， CHENG L L， HOU J J， et al.A review of the development of extrusion technology［J］.Precision Forming Engineering，，2023，15（06）：209⁃221.
2	Pettas D， Karapetsas G， Dimakopoulos Y， On the origin of extrusion instabilities： Linear stability analysis of the viscoelastic die swell［J/OL］. Journal of Non⁃Newtonian Fluid Mechanics， 2015， 224： 61⁃77.
3	卢臣. 塑料异型材气辅挤出口模流动的理论与实验研究［D］.南昌大学，2007.
4	Graessley William W， Glasscock Steven D， Crawley Richard L. Die Swell in Molten Polymers［J］. Transactions of The Society of Rheology December， 1970，14 （4）： 519–544.
5	邓小珍，肖兵，任重.聚合物气体辅助挤出成型研究进展［J］.高分子材料科学与工程，2022，38（3）：151⁃158.
	DENG X Z， XIAO B， REN Z.Research progress in gas⁃assisted extrusion of polymers［J］.Polymer Materials Science and Engineering，2022，38（3）：151⁃158.
6	Liang R F， Mackley M R. The gas⁃assisted extrusion of molten polyethylene［J］. J Rheol， 2001，45 （1）： 211–226.
7	黄兴元. 聚合物气体辅助口模挤出成型的理论及实验研究［D］.南昌大学，2006.
8	李萍. 聚合物气体辅助挤出成型工艺及数值模拟［D］.哈尔滨理工大学，2012.
9	邓小珍. 塑料异型材气体辅助共挤出成型的实验和理论研究［D］.南昌大学，2014.
10	Ren Z， Huang X Y. 3D Numerical simulation of the hollow square⁃typed polymer based on gas⁃assisted extrusion method［J］. Materials Science Forum， 2016， 861： 189⁃194.
11	Liu T， Huang X， Luo C， et al. The Formation Mechanism of the Double Gas Layer in Gas⁃Assisted Extrusion and Its Influence on Plastic Micro⁃Tube Formation［J］. Polymers， 2020， 12：355.
12	王瑞喆，柳和生，黄兴元，等.不同进气角度对片材气辅挤出成型的影响［J］.中国塑料，2021，35（7）：80⁃86.
	WANG R Z， LIU H S， HUANG X Y，et al.The influence of different air inlet angles on sheet gas⁃assisted extrusion molding［J］.China Plastics，2021，35（7）：80⁃86.
13	Ren Z， Huang X， Liu H. Numerical and experimental studies for gas assisted extrusion forming of molten polypropylene［J/OL］.［2024⁃06⁃16］. Journal of Applied Polymer Science， 2015， 132（42）.
14	Ren Z， Huang X Y. Effects of Gases Temperature on the Viscosity and Flow Velocity of Melt in the Gas⁃Assisted Extrusion Forming of Plastic Micro⁃Tube［J/OL］. Materials Science Forum， 2020， 976： 145⁃150.
15	Wan B， Ren Z， Liu G D，et al. The effect of gas assisted length on polymer melt extrusion based on the gas⁃assisted extrusion technique［J］. IOP Conf Ser Mater Sci Eng， 2017，170 012018.
16	Jiang S， Liu H， Huang X， et al. Improved die assembly for gas⁃assisted sheet extrusion using different up and down gas layer thicknesses［J］. Polym Eng Sci， 2021，61： 1 546–1 558.
17	Jiang S， Liu H， Huang X.Numerical and experimental studies on the effect of thickness difference between up and down gas layers on sheet polymer gas⁃assisted extrusion forming［J/OL］. Polymer Engineering & Science， 2020， 60（10）： 2 470⁃2 486.
18	Chen S， Huang X， Liu B， et al. Influence of Gas Inlet Slit Width on Gas⁃Assisted Plastic Micro⁃Tube Extrusion. Processes 2023， 11.
19	Zhang X， Huang X， Liu B，et al. Effect of Mold Flow Channel Parameters on Gas⁃Assisted Extrusion of Medical Microtubules［J］. Processes， 2023， 11.
20	余忠，黄益宾，章凯，等.气体流量对管材气辅挤出的影响［J］.高分子材料科学与工程，2016，32（03）：113⁃117+123.
	YU Z， HUANG Y B， ZHANG K， et al.Effect of gas flow rate on gas⁃assisted extrusion of pipes［J］.Polymer Materials Science and Engineering，2016，32（03）：113⁃117+123.
21	Zhong Ren， Huang Xingyuan. IOP Conf Ser Earth Environ Sci， 2019， 267 042059.

[1]	MA Fengan, ZHAO Guanghui, TIAN Cheng, JIA Yuzhe, LIU Tao. Research progress in effect of defects on mechanical properties of continuous⁃fiber⁃reinforced composites [J]. China Plastics, 2025, 39(1): 104-111.
[2]	HE Wenfeng, ZHAO Tongjie, XIE Yuhui, MEI Yi, XIE Delong. Synthesis and modification of high⁃temperature hydrogen⁃containing vinyl silicone resins [J]. China Plastics, 2025, 39(1): 31-36.
[3]	MA Jianxin, WANG Guoliang, DU Zhongjie, WANG Wucong, JIN Hua, ZOU Wei, WANG Hong, ZHANG Chen. Preparation of hydroxyl functionalized ACR and its application in PBT modification [J]. China Plastics, 2024, 38(9): 14-19.
[4]	ZOU Xiaoyue, XU Jiahui, CHEN Zhenshu, YANG Youqiang, LU Zhanquan, JIA Yuxin, LI Cheng, YE Nanbiao, CAO Kun. Research progress in mask filter materials and their electret technology [J]. China Plastics, 2024, 38(9): 47-53.
[5]	ZHAI Menglei, CHEN Wenguang, HUANG Ming, LEI Jinyu, ZHANG Na, LIU Chuntai, GAO Guoli. Calculation method and numerical verification of transverse dynamic permeability in large⁃tow carbon fiber tows [J]. China Plastics, 2024, 38(9): 54-59.
[6]	PANG Xinlei, BAI Yu, WANG James H. Study on solid⁃state polymerization and performance of PEEK oligomers [J]. China Plastics, 2024, 38(9): 8-13.
[7]	ZHENG Tianyi, ZHANG Ben, GUO Min, WANG Ying. Research progress in electroactive polymer materials for bone tissue regeneration [J]. China Plastics, 2024, 38(8): 113-117.
[8]	LIU Wei, YU Caili, CHEN Xiaocheng, ZHANG Chun, ZHAO Kewen. Study on adhesive and foaming properties of EVA expandable tape for small volumes [J]. China Plastics, 2024, 38(8): 40-45.
[9]	XU Chuanhao, SHI Zhenwu, CHI Bo. Effect of BMH type warm mixture on fatigue properties of waste plastic/SBS composite modified asphalt [J]. China Plastics, 2024, 38(8): 94-99.
[10]	LIU Chaofan, LIAO Shenglong, ZHONG Shuying, LIN Ying. Synthesis and properties of responsive hyaluronic acid micelles [J]. China Plastics, 2024, 38(7): 25-31.
[11]	SUN Fangfang, SONG Yunyun. Synthesis of N⁃phenylmaleimide copolymer and its heat⁃resistant modification effect on PVC resin [J]. China Plastics, 2024, 38(7): 49-54.
[12]	XU Chen, LUO Bofei, LIU Tengteng, XING Jingkai. Research progress in modification of polypropylene with nucleating agent [J]. China Plastics, 2024, 38(7): 79-85.
[13]	WANG Shen, LIU Xuanbo, ZHANG Yanfang, JIA Xuefei, ZHU Guixiang, ZHANG Longgui. Research progress in biodegradable nonwoven materials [J]. China Plastics, 2024, 38(7): 86-92.
[14]	NIU He, LYU Mingfu, ZHANG Zongyin, XU Yaohui, XU Wei, ZHANG Shijun, GUO Peng. Application progress in additives in polyglycolic acid processing [J]. China Plastics, 2024, 38(6): 105-110.
[15]	LIU Shuai, ZHAO Zihao, YU Ying, YANG Jiaxin, ZHANG Yang. Preparation and dielectric properties of core⁃shell structural carbon⁃fiber felt@polyaniline composite [J]. China Plastics, 2024, 38(6): 25-30.