Visual Research of Melting $ehavior of Plastics in Injection Screws

China Plastics ›› 2007, Vol. 21 ›› Issue (4): 96-102.

Previous Articles

Visual Research of Melting $ehavior of Plastics in Injection Screws

YAO ZHAO-fu1，JIN ZHI-ming1，DU-NING2

1.Beijing University of Chemical Technology, Beijing 100029,China;
2.Ningbo Haitai Institute of Engineering,Ningbo 315000,China

Online:2007-04-26 Published:2021-05-20

Abstract

Abstract: The melting behavior of the plastics in iniection and extrusion screws was discussed and com-pared.The influences of processing conditions and screw structure on the melting behavior were studied. The position of melting delay and the axial temperature difference along injection screws were deter mined and correlated with processing conditions like back pressure, rotation rate, temperature, and reservation time. Proper structures for screws with high efficiency were suggested

Key words: injection molding, melting, injection screw, visual research

CLC Number:

TQ320.66⁺2

YAO ZHAO-fu, JIN ZHI-ming, DU-NING. Visual Research of Melting $ehavior of Plastics in Injection Screws[J]. China Plastics, 2007, 21(4): 96-102.

[1]	HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan. Injection defect analysis and molding optimization of high⁃gloss grille for an automobile [J]. China Plastics, 2022, 36(9): 70-73.
[2]	XU Yuxuan, DANG Kaifang, FU Nanhong, JIAO Xiaolong, XIE Pengcheng, YANG Weimin. Research progress in adaptive optimization technology for injection molding process [J]. China Plastics, 2022, 36(9): 180-186.
[3]	WANG Xiaodong, WANG Quan, CHEN Tuo, ZHENG Yue. Optimization of multi⁃objective parameters for double color injection⁃molding based on grey relational analysis and entropy weight method [J]. China Plastics, 2022, 36(7): 115-120.
[4]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[5]	DENG Shixin, WANG Jian, YANG Weimin. Simulation and analysis of fluid high⁃pressure and high⁃speed collision in mixing head cavity of enhanced reaction injection molding machine [J]. China Plastics, 2022, 36(6): 130-136.
[6]	WANG Jinye, TANG Bohu, YANG Lining, XIE Meng, GUO Zechao, YANG Guang. Study on multi⁃jet⁃fusion forming process of PA12 parts [J]. China Plastics, 2022, 36(6): 81-86.
[7]	SUN Wenbo, XIN Chunling, HE Yadong, ZHAI Yujiao, YAN Baorui. Influence of micro⁃foaming injection molding process on cell structure of glass⁃fiber⁃reinforced PBT products [J]. China Plastics, 2022, 36(5): 1-7.
[8]	TAN Lei, HUANG Xingyuan, WANG Han, PAN Liuwen. Analysis of temperature field in melting chamber of hot⁃air melting waste plastic granulator [J]. China Plastics, 2022, 36(4): 149-157.
[9]	LI Rui, JIANG Yanfeng, WU Shuang, AN Yanjie, JIANG Zeyu, ZHANG Mingqiang. Microstructure and thermal characterization of polypropylene special material for cast films through temperature rising elution fractionation [J]. China Plastics, 2022, 36(3): 53-57.
[10]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on process parameters for filling process of polypropylene microcellular injection molding under supercritical N₂ [J]. China Plastics, 2022, 36(3): 69-74.
[11]	LIU Ganhua, TANG Naifu, MA Ruiwu. Multi⁃objective optimization for MIM process parameters of equal⁃distance spiral bevel gear [J]. China Plastics, 2022, 36(3): 96-103.
[12]	ZHANG Xiang, YAN Zhenhao, KONG Xiaoya, ZHU Jianxiao, GUAN Guotao, ZHAO Na, LI Qian. Study on structural optimization of disc screw in micro injection machine [J]. China Plastics, 2022, 36(2): 147-156.
[13]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on surface quality optimization of microfoaming injection⁃molded products [J]. China Plastics, 2022, 36(2): 19-26.
[14]	HUANG Wei, LIU Hesheng, HUANG Xingyuan, ZHANG Wei, KUANG Tangqing, CHEN Zhongshi. Study on high⁃pressure water penetration behavior of square cross⁃sectional pipes based on short⁃glass⁃fiber⁃reinforced polypropylene [J]. China Plastics, 2022, 36(2): 82-88.
[15]	REN Lihui, LI Fuzhu, WANG Yun, DAI Yachun, YANG Hui, XU Zhenying. Multi⁃objective optimization of injection molding quality based on TOPSIS⁃grey relational analysis [J]. China Plastics, 2022, 36(2): 96-102.

Visual Research of Melting $ehavior of Plastics in Injection Screws

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments