Studies on PC/ABS Alloys with Lower Gloss

doi:10.19491/j.issn.1001-9278.2009.06.004

Abstract

Abstract: Four kinds of gloss-reducing agents were introduced into PC/ABS blends used for inner decorative articles of automobile. The effects of these agents in gloss reducing and mechanical properties of the blends were compared. It was found that all the four were effective in gloss-reducing. BMAT was harmful to the impact strength, AX8900 could lower the modules. KS-TD-00201 and KS-TD-00202 had no effects on the mechanical properties and were of low price, consequently should be selected.

Key words: polycarbonate, acrylnitrile-butadiene-styrene copolymer, alloy, gloss-reducing agent

CLC Number:

TQ323.6

Ye TIAN . Studies on PC/ABS Alloys with Lower Gloss[J]. China Plastics, 2009, 23(06): 18-21 .

[1]	MENG Xin, WANG Xiaolong, GONG Weiguang, JIN Yi. Preparation of three⁃sources⁃in⁃one shell⁃core structural flame retardants and its application in poly（lactic acid） [J]. China Plastics, 2022, 36(9): 96-104.
[2]	HE Hezhi, XU Li, YANG Yike. Effect of prestress on mechanical properties of PC/CF laminates [J]. China Plastics, 2022, 36(4): 1-5.
[3]	YU Zhixing, LI Yingcheng, WANG Hongxue, PANG Xinlei, WANG Yuyao. Study on laser direct structuring materials based on polyamide 6 and polycarbonate and their fabrication of parts with heterostructure [J]. China Plastics, 2022, 36(2): 8-12.
[4]	LUO Fei, LI Cuijuan, LIU Zhuojia, LIU Yuxin, SHI Suyu, DANG Xudan, LIU Chuntai, ZHAO Yongtao. Study on Relationship between Molecular Orientation and Dynamic Viscoelasticity of Polycarbonate [J]. China Plastics, 2021, 35(9): 81-86.
[5]	ZHU Daofeng. Development and Application of PET/PE Alloy Sheet by Recycling Polyester [J]. China Plastics, 2021, 35(8): 100-104.
[6]	NI Jia, DUAN Kaige, ZHU Hui, HU Mingyuan, CHENG Zhi, YU Dongming. Preparation and Performance of New EVOH/PE⁃RT Alloy⁃coated PE⁃RT Double⁃layer Oxygen Barrier Tube [J]. China Plastics, 2021, 35(7): 32-35.
[7]	YING Jie, QIU Qihao, ZHANG Xing, GU Hainan, LUO Rui. Effect of Talc on Properties of Flame⁃retardant Polycarbonate [J]. China Plastics, 2021, 35(5): 107-112.
[8]	SUN Qiwei, CHEN Yuhong, DONG Shuyuan, LANG Jianlin, ZHOU Xiaowei, ZHANG Yun. Warpage Simulation of Overmolding Injection Compression Molded PMMA/PC Composite Panels [J]. China Plastics, 2021, 35(4): 53-59.
[9]	WANG Cheng, WENG Nanchang, NIE Yan, QIN Hongliang. Study on Application of PBT/PC Film in Document Manufacturing [J]. China Plastics, 2021, 35(2): 71-76.
[10]	YIN Nianwei, CHEN Feng, FU Xuejun, CAO Shaoqiang. Effect of mass ratio of PET to PBT on surface of flame retardant reinforced PET/PBT alloy [J]. China Plastics, 2021, 35(12): 32-36.
[11]	CHEN Yuhong, ZHAN Maosheng. Effect of compression process parameters on residual stress of injection⁃ compression⁃molded polycarbonate transparencies [J]. China Plastics, 2021, 35(12): 9-15.
[12]	BI Weifeng, LIU Jiaoshi, CHEN Shaojun, YUAN Hao, ZHANG Yanxia. Effect of Composition Factors on Mechanical Properties of PC/ABS Alloy Exposed to Alkylbenzene [J]. China Plastics, 2021, 35(11): 44-48.
[13]	NI Jia, DUAN Kaige, ZHU Hui, HU Mingyuan, CHENG Zhi, YU Dongming. Study on Oxygen Permeability of Plastic Pipes Through Manometric Method [J]. China Plastics, 2021, 35(1): 73-77.
[14]	YIN Hongmei, LIU Yongli, WANG Jianan, MEI Ye. Study on Design Method of Structural Optimization for Air Bag Plastic Cover Plate Based on ISIGHT [J]. China Plastics, 2020, 34(9): 61-65.
[15]	Jie YING, Qihao QIU, Haojie ZHANG, Hainan GU, Hao ZHOU. Effect of Different Types of Toughening Agent on Properties of Polycarbonate [J]. China Plastics, 2020, 34(7): 30-35.

Studies on PC/ABS Alloys with Lower Gloss

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments