Influence of Staggering Angle and Thickness of Kneading Blocks in an Intermeshing Co-rotating Twin-screw Extruder on Degradation of Polypropylene

doi:10.19491/j.issn.1001-9278.2010.08.023

China Plastics ›› 2010, Vol. 24 ›› Issue (08): 99-102 .DOI: 10.19491/j.issn.1001-9278.2010.08.023

Received:2010-03-29 Revised:1900-01-01 Online:2010-08-26 Published:2010-08-26

Abstract

Abstract: The effect of staggering angle and width of kneading block of the intermeshing co-rotating twin-screw extruder on the degradation of polypropylene (PP) in granulation process were studied. It showed that with increasing staggered kneading disc angle and kneading plate thickness, the degradation of PP increased.

Key words: staggering angle of kneading block, kneading block thickness, polypropylene, degradation, screw configuration

. Influence of Staggering Angle and Thickness of Kneading Blocks in an Intermeshing Co-rotating Twin-screw Extruder on Degradation of Polypropylene[J]. China Plastics, 2010, 24(08): 99-102 .

[1]	ZHANG Lin, XIA Zhangchuan, HE Yadong, XIN Chunling, WANG Ruixue, REN Feng. Influence of gas flow of plasma jet carrier on modification effect for glass fiber [J]. China Plastics, 2022, 36(9): 7-15.
[2]	MA Chao, MA Lanrong, WEI Liao, YIN Huibo, LIN Xiang. A review of modification processing and water⁃soluble degradation ability of polyglycolic acid material [J]. China Plastics, 2022, 36(9): 74-84.
[3]	MA Guocheng, HE Zhen, CHEN Shaojun. Research progress in degradability of cellulose acetate [J]. China Plastics, 2022, 36(9): 111-121.
[4]	LIN Jianhui, LU Jiahui, WU Xinying, FAN Xueying, DENG Guirong, GAO Liang, MEI Chengfang, YANG Yonggang. Study of uncertainty evaluation in determination of ultimate aerobic biodegradability of degradable materials under controlled composting conditions [J]. China Plastics, 2022, 36(9): 140-147.
[5]	ZHANG Bing. Study on test of oxidation induction time for random copolymer polypropylene pipe [J]. China Plastics, 2022, 36(8): 107-109.
[6]	ZHAO Hongjing, ZHU Jiang. Study on numerical simulation of two⁃phase extrusion for micro/nano⁃laminated natural rubber/polypropylene [J]. China Plastics, 2022, 36(8): 110-114.
[7]	LIU Yi, WANG Ye, SUN Wei, QU Guoxing, XU Xia, YANG Shaolin, YUAN Ning. Determination of content of transparent nucleating agent in polypropylene using infrared spectroscopy [J]. China Plastics, 2022, 36(8): 115-118.
[8]	ZHANG Taozhong, CHEN Xiaolong, HAO Xiaoyu, YU Fujia. Comparison of mechanical properties and interfacial interactions of polypropylene composites filled with talc， calcium carbonate， and barium sulfate [J]. China Plastics, 2022, 36(8): 36-41.
[9]	WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu. Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism [J]. China Plastics, 2022, 36(7): 1-7.
[10]	YU Changyong, XIN Zhong. Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene [J]. China Plastics, 2022, 36(7): 121-128.
[11]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[12]	WU Xiongjie, ZHU Dongbo, SUN Jiangbo, GAO Longmei, CHU Yu, CHENG Jinsong, XIE Aidi. Study on application performance of polyethylene/CaSO₄ nanoparticle composite flexible packaging [J]. China Plastics, 2022, 36(6): 10-15.
[13]	SUN Wei, LIU Yi, LIAO Yunlong, CHEN Junjia. Study on influence factors for determination of ethylene content in polypropylene powder [J]. China Plastics, 2022, 36(6): 54-59.
[14]	WEI Liao. Research progress in application of water⁃soluble polymer materials for oil and gas field fracturing [J]. China Plastics, 2022, 36(5): 149-157.
[15]	WANG Qingsong. Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC [J]. China Plastics, 2022, 36(4): 30-34.

Influence of Staggering Angle and Thickness of Kneading Blocks in an Intermeshing Co-rotating Twin-screw Extruder on Degradation of Polypropylene

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments