[1] Kumar S. Selective laser sintering: a qualitative and objective approach[J]. Jom, 2003, 55: 43-47.[2] Kruth J P, Wang X, Laoui T, et al. Lasers and materials in selective laser sintering[J]. Assembly Automation, 2003, 23(4): 357-371.[3] Kruth J P, Levy G, Klocke F, et al. Consolidation phenomena in laser and powder-bed based layered manufacturing[J]. CIRP annals, 2007, 56(2): 730-759.[4] Rietzel D, Drexler M, Kühnlein F, et al. Influence of temperature fields on the processing of polymer powders by means of laser and mask sintering technology[C]//2011 International Solid Freeform Fabrication Symposium. University of Texas at Austin, 2011. [5] S. Mazur: Polymer powder technology[M]. Wiley, 1995.[6] Yuan S, Zheng Y, Chua C K, et al. Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering[J]. Composites Part A: Applied Science and Manufacturing, 2018, 105: 203-213.[7] Yuan S, Chua C K, Zhou K. 3D‐printed mechanical metamaterials with high energy absorption[J]. Advanced Materials Technologies, 2019, 4(3): 1800419.[8] Zhu W, Yan C, Shi Y, et al. Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterparts[J]. Materials & Design, 2015, 82: 37-45. [9] Tan L J, Zhu W, Sagar K, et al. Comparative study on the selective laser sintering of polypropylene homopolymer and copolymer: Processability, crystallization kinetics, crystal phases and mechanical properties[J]. Additive Manufacturing, 2021, 37: 101610.[10] Ho H C H, Gibson I, Cheung W L. Effects of energy density on morphology and properties of selective laser sintered polycarbonate[J]. Journal of Materials Processing Technology, 1999, 89: 204-210. [11] Krigbaum W R, Uematsu I. Heat and entropy of fusion of isotactic polypropylene[J]. Journal of Polymer Science Part A: General Papers, 1965, 3(2): 767-776.[12] Lezak E, Bartczak Z, Galeski A. Plastic Deformation of the γ Phase in Isotactic Polypropylene in Plane-Strain Compression[J]. Macromolecules, 2006,39:4811-4819.[13] Lezak E, Bartczak Z. Plastic Deformation of the γ Phase Isotactic Polypropylene in Plane? Strain Compression at Elevated Temperatures[J]. Macromolecules, 2007, 40(14): 4933-4941. [14] Alamo R G, Kim M H, Galante M J, et al. Structural and kinetic factors governing the formation of the γ polymorph of isotactic polypropylene[J]. Macromolecules, 1999, 32(12): 4050-4064. |