The Effects of Compatibilizer and Microwave Irradiation on Mechanical Porformance and Crystallization Properties of Waste Film Hybrid Composite

doi:10.19491/j.issn.1001-9278.2008.11.019

China Plastics ›› 2008, Vol. 22 ›› Issue (11): 82-86 .DOI: 10.19491/j.issn.1001-9278.2008.11.019

Previous Articles Next Articles

The Effects of Compatibilizer and Microwave Irradiation on Mechanical Porformance and Crystallization Properties of Waste Film Hybrid Composite

CHAI Xi-juan，LIAO Ya-long，SUN Ke-wei

1. School of Wood Science and Interior Design, Southwest Forestry University, Kunming 650224, China; 2. Faculty of Material and Metallurgical Engineering, Kunming University of Science and Technology, Kunming 650093, China； 3. National Engineering Research Center of Waste Resource Recovery, Kunming 650093, China

Received:2008-01-01 Revised:1900-01-01 Online:2008-11-26 Published:2008-11-26

Abstract

Abstract: The composite of second-handed-fiber and waste particle reinforced post-consumer mulch films was prepared via melt mixing. A compatibilizer (PE-g-MA) and microwave irradiation were employed to improve the mechanical performance and crystallization behavior of the composite. The compatibilizer and microwave irradiation caused the crystallization peak temperature of the composite reduced by 1.3 ℃ and 0.8 ℃ , and the crystallinity increased by 0.3 % and 2.49 %, respectively, compared with neat composite. The compatibilizer made the crystallization rate reduce, and microwave irradiation made the crystallization rate enhanced.

Key words: hybrid composite, waste mulch film, compatibilizer, microwave irradiation, crystallization behavior, mechanical property

CHAI Xi-juan, LIAO Ya-long, SUN Ke-wei. The Effects of Compatibilizer and Microwave Irradiation on Mechanical Porformance and Crystallization Properties of Waste Film Hybrid Composite[J]. China Plastics, 2008, 22(11): 82-86 .

[1]	JIAO Zhiwei, WANG Kechen, ZHANG Yang, YANG Weimin. Performance of PVC/ABS composites filled with carbon black and talc powders based on carbon nano coating deposition [J]. China Plastics, 2022, 36(8): 10-15.
[2]	ZHANG Taozhong, CHEN Xiaolong, HAO Xiaoyu, YU Fujia. Comparison of mechanical properties and interfacial interactions of polypropylene composites filled with talc， calcium carbonate， and barium sulfate [J]. China Plastics, 2022, 36(8): 36-41.
[3]	YU Changyong, XIN Zhong. Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene [J]. China Plastics, 2022, 36(7): 121-128.
[4]	TAN Liqin, LIU Weiqu, LIANG Liyan, WANG Shuo, FENG Zhiqiang, LIN Jiaming. Preparation and performance of epoxy resin modified with mercaptan polysiloxane [J]. China Plastics, 2022, 36(7): 21-29.
[5]	XU Jie, ZHONG Jinfu, TONG Xiaoqian, LI Guangfu, FU Dongliang, LI Chengcheng. Preparation and performance of carboxyl⁃terminated tannic acid/gallic acid⁃based epoxy composite [J]. China Plastics, 2022, 36(7): 44-50.
[6]	LI Kaize, XIN Yong. Properties of thermoplastic polyurethane composites modified with carbon nanotubes [J]. China Plastics, 2022, 36(6): 1-5.
[7]	WANG Shuai, ZHANG Yudi, YANG Fukai, XU Xinyu. Preparation and properties of polyimide/multi⁃walled carbon nanotubes composite foams [J]. China Plastics, 2022, 36(6): 39-45.
[8]	WANG Jinye, TANG Bohu, YANG Lining, XIE Meng, GUO Zechao, YANG Guang. Study on multi⁃jet⁃fusion forming process of PA12 parts [J]. China Plastics, 2022, 36(6): 81-86.
[9]	SUN Wenbo, XIN Chunling, HE Yadong, ZHAI Yujiao, YAN Baorui. Influence of micro⁃foaming injection molding process on cell structure of glass⁃fiber⁃reinforced PBT products [J]. China Plastics, 2022, 36(5): 1-7.
[10]	WANG Ke, LONG Chunguang. Mechanical and tribological properties of ultra⁃high molecular weight polyethylene/sepiolite fiber composites [J]. China Plastics, 2022, 36(5): 19-23.
[11]	CHEN Sheng, LIANG Yingchao, WU Fangjuan, FANG Hui, FAN Xinfeng, CHEN Hui, WANG Yonggang. Preparation and interfacial modification of polyamide 6/bidirectional warp⁃knitted glass fiber composites [J]. China Plastics, 2022, 36(5): 24-28.
[12]	HE Hezhi, XU Li, YANG Yike. Effect of prestress on mechanical properties of PC/CF laminates [J]. China Plastics, 2022, 36(4): 1-5.
[13]	WANG Qingsong. Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC [J]. China Plastics, 2022, 36(4): 30-34.
[14]	LIU Guangyuan, ZHAI Qianchao, WANG Fengwu, WANG Yihui, ZHENG Debao, CHEN Xiangying, ZHANG Zhongjie. Preparation and performance of PE⁃HD compatibilizer and adhesive resin through binary monomer grafting [J]. China Plastics, 2022, 36(4): 35-42.
[15]	LI Suyuan, LIU Huipeng, GONG Shun, HUANG Guotao, LI Yucai, WU Xin, DENG Jianping, PAN Kai. Preparation and characterization of EVA foaming materials modified with thermoplastic polyamide elastomer [J]. China Plastics, 2022, 36(4): 6-14.

The Effects of Compatibilizer and Microwave Irradiation on Mechanical Porformance and Crystallization Properties of Waste Film Hybrid Composite

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments