中国塑料

中国塑料 ›› 2008, Vol. 22 ›› Issue (06): 54-57 .DOI: 10.19491/j.issn.1001-9278.2008.06.012

• 加工与应用 • 上一篇    下一篇

螺杆轴向振动对PVC/木粉复合材料挤出片材力学性能的影响

余兴兴，瞿金平，冯彦洪，刘远峰   

  1. 华南理工大学聚合物新型成型装备国家工程研究中心，华南理工大学聚合物成型加工工程教育部重点实验室，广东广州510640
  • 收稿日期:2007-12-24 修回日期:1900-01-01 出版日期:2008-06-25 发布日期:2008-06-25

Influence of Screw Axial Vibration on Tensile Properties of Poly ( vinyl chloride)/Wood-flour Composite

YU Xing-xing，QU Jin-ping，FENg Yan-hong，LIU Yuan-feng   

  1. National Engineering Research Center of Novel Equipment for Polymer Processing, The State Kcy Laboratory of Polymer Processing Engineering of Ministry of Education, South China University of Technology, Guang Ghou 510640，China
  • Received:2007-12-24 Revised:1900-01-01 Online:2008-06-25 Published:2008-06-25
  • Contact: QU Jin-ping

摘要： 介绍了使用聚合物动态塑化单螺杆挤出机对聚氯乙烯(PVC)/术粉复合材料进行加工时，螺杆轴向振动对其挤出片材的拉伸性能的影响。将在振动频率为5-25Hz,振幅为40~200μm下挤出的PVC/木粉复合材料的拉伸性能和稳态状况下挤出的复合材料拉伸性能进行对比，从中找出最佳的振动参数范围。结果表明，振动频率为20 Hz,振幅为120μm时，复合材料的整体拉伸性能最佳，其拉伸强度、拉伸弹性模量、断裂伸长率和稳态相比都有较大的提高。

关键词: 聚氯乙烯, 木粉, 复合材料, 轴向振动, 单螺杆挤出, 振幅, 振频

Abstract: The paper introduced the influence of screw axial vibration on extrusion properties of poly (vinyl chloride)(PVC) /wood-flour composite, when it was processed by singlc screw dynamic extrusion.The tensile properties of PVC/wood-flour composite resulted by different screw vibration parameters (amplitude and frequency) were compared with those in static extrusion. It showed that the best vibration parameters were 20 Hz vibration frequency and 120μm amplitude.

Key words: polyvinyl chloride), wood-flour, composite, screw axial vibration, single scerw extrusion, amplitude, frequency

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2023 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发