中国塑料 ›› 2009, Vol. 23 ›› Issue (03): 19-23.DOI: 10.19491/j.issn.1001-9278.2009.03.004

• 材料与性能 • 上一篇    下一篇

聚丙烯/乙丙抗冲共聚物合金结晶行为研究

刘立新 赵晓非 谭小红 贾相臣 安彦杰 张明辉   

  1. 大庆石油学院化学化工学院
  • 收稿日期:2008-11-18 修回日期:1900-01-01 出版日期:2009-03-26 发布日期:2009-03-26

Study of Crystallization Behavior of PP/EPR High-impact Alloys

  

  • Received:2008-11-18 Revised:1900-01-01 Online:2009-03-26 Published:2009-03-26

摘要: 实验室聚合得到乙烯单元含量分别为0.94 %、1.67 %、3.00 %(摩尔分数,下同)的聚丙烯/乙丙抗冲共聚物(PP/EPR)合金样品,用差示扫描量热法研究了样品的等温结晶和非等温结晶行为。实验结果表明,各样品在不同温度下的等温结晶均符合Avrami方程;同一样品,等温结晶温度越高,结晶所需要的时间就越长,结晶速率越低,非等温结晶时随着降温速率的增加,结晶温度范围变宽并向低温移动;对于不同样品,等温结晶的结晶速率随乙烯单元含量增加而降低,但当乙烯单元含量为3.00 %时出现相反的情况,非等温结晶时的结晶温度也有同样的规律。

关键词: 聚丙烯, 乙丙抗冲共聚物, 合金, 等温结晶, 非等温结晶, Avrami方程

Abstract: In this paper, polypropylene/EPR in-situ alloys were prepared with ethylene contents of 0.94 mol%, 1.67 mol% and 3.00 mol%. Isothermal and non-isothermal crystallization behaviors of the samples were investigated using differential scanning calorimetry (DSC). The isothermal crystallization data was well fitted with Avrami equation. The higher the crystallization temperature, the lower the crystallization rate. For the non-isothermal crystallization, the range of crystallization temperature became wider and moved to lower temperature with increasing cooling rate. It was also found that the higher the content of ethylene, the lower the crystallization rate of isothermal crystallization, except the content of ethylene was 3.00 mol %, and the crystallization temperature of non-isothermal crystallization had the same regularity.

Key words: polypropylene, ethylene propylene random copolymer, alloy, isothermal crystallization, non-isothermal crystallization, Avrami equation