中国塑料

中国塑料 ›› 2010, Vol. 24 ›› Issue (02): 26-29 .DOI: 10.19491/j.issn.1001-9278.2010.02.005

• 材料与性能 • 上一篇    下一篇

滑石粉、碳酸钙填充聚丙烯复合材料等温结晶行为的对比研究

邹燕 纪彬彬 温变英   

  1. 北京工商大学
  • 收稿日期:2009-07-20 修回日期:1900-01-01 出版日期:2010-02-26 发布日期:2010-02-26

Study on the Isothermal Crystallization Behavior of PP

Wen Bian-Ying   

  • Received:2009-07-20 Revised:1900-01-01 Online:2010-02-26 Published:2010-02-26
  • Contact: Wen Bian-Ying

摘要： 用熔融共混法分别制备了聚丙烯（PP）/滑石粉、PP/碳酸钙(CaCO3)复合材料，用差示扫描量热法(DSC)考察了PP及其复合材料的等温结晶过程，并用Avrami方程对纯PP及PP/滑石粉、PP/CaCO3复合材料的等温结晶动力学行为进行了分析。结果表明，PP、PP/滑石粉及PP/CaCO3复合材料的Avrami指数均小于2.3，存在均相成核和异相成核双重成核机理，且其结晶速率常数和结晶速率均随着结晶温度的升高而减小；在该体系中，滑石粉对基体PP有明显的异相成核作用，使PP的结晶速率加快、结晶时间缩短；而CaCO3则没有明显的异相成核作用。

关键词: 聚丙烯, 碳酸钙, 滑石粉, 等温结晶

Abstract: PP/talc and PP/CaCO3 composites were prepared via melt mixing method using Haake rheometer. The isothermal crystallization behavior of PP and the composites were investigated using differential scanning calorimetry(DSC). The effects of talc and calcium carbonate on the isothermal crystallization behavior of PP were compared. It showed that all the Avrami indexes of PP, neat or in the composites, were lower than 2.3, which showed that both homogeneous and heterogeneous nucleation mechanisms occurred in these systems. The crystallization rate decreased with increasing crystallization temperature. It was found that the effect of talc promoted the heterogeneous nucleation significantly, whereas the effect of CaCO3 was moderate.

Key words: polypropylene, talc, CaCO3, isothermal crystallization

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2023 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发