中国塑料 ›› 2010, Vol. 24 ›› Issue (05): 59-62 .DOI: 10.19491/j.issn.1001-9278.2010.05.013

• 加工与应用 • 上一篇    下一篇

不同颜料浓度时添加高熔体流动速率PE-LLD的色母粒性能研究

乔博 乔辉 程晓静 吴立峰 丁筠   

  1. 北京化工大学
  • 收稿日期:2009-12-09 修回日期:2010-01-15 出版日期:2010-05-26 发布日期:2010-05-26

Properties of Color Masterbatch Containing High Melt Flow Rate PE-LLD in Different Contents of Pigment

qiao bo   

  • Received:2009-12-09 Revised:2010-01-15 Online:2010-05-26 Published:2010-05-26
  • Contact: qiao bo

摘要: 以高熔体流动速率的线形低密度聚乙烯(PE-LLD)与低密度聚乙烯(PE-LD)混合作为载体,不添加任何分散剂制成不同颜料浓度的蓝色母粒。研究了该体系的加工流变性能、母粒的着色性能以及分散性能,并与以低相对分子质量聚乙烯蜡作为分散剂的PE-LD色母粒进行了对比。结果表明,当颜料浓度为30 %(质量分数,下同)时,以PE-LLD/PE-LD作为载体,不用添加任何分散剂,制品的力学性能和色彩性能都可达到使用要求;但当颜料浓度达到40 %及以上时,以PE-LLD/PE-LD为载体和添加聚乙烯蜡2种加工方法都不能得到合格的制品。

关键词: 线形低密度聚乙烯, 色母粒, 熔体流动速率, 颜料, 性能

Abstract: A noval blue color masterbatch was prepared using a blend of PE-LD and high melt flow rate PE-LLD as the matrix containing no dispersant. The rheological, coloring and dispersion properties of the masterbatch were investigated, which was compared with the traditional masterbatch containing a low molecular weight polyethylene wax as a dispersant. It was found that the PE-LLD/PE-LD matrix with no dispersant could bear up to 30 % of blue pigment keeping good mechanical and coloring, and processing properties. However, when the content of pigment was 40 % or higher, neither novel nor traditional masterbatch could maintain a satisfactory performance.

Key words: linear low-density polyethylene, color masterbatch, melt flow rate, pigment, property